• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.607-613
• /
• 2008

A monitoring system for the subway structures using prestrained FBG sensors fixed with partially stripped fibers was developed. The sensor packages had pre-strain controllable fixtures. Tensile and compressive strain of the structure could be measured without slip. The FBG sensor system was applied to the concrete lining structure in Taegu subway. Near the structure, the narrow tunnel construction, for the electric power cables and telecommunication cables, started. We wanted to measure the deformations of the subway structures due to the construction by the FBG sensor. The applied sensors had the gauge length of 1 meter to overcome the inhomogeneity of the concrete material with enough length. In order to fix tightly to the structure, the partially stripped parts of the sensor glued to the package and slip phenomenon between fiber and acrylate jacket was prevented. Prestrain of the sensor was imposed by controlling the two fixed points with bolts and nuts in order to measure compressive strain as well as tensile strain. The behavior of subway lining structure could be monitored very well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.8-10
• /
• 2010

We report the enhancement of hole injection using thermally evaporated $CuO_x$ layer between Ag anode and 4,4'-Bis[N-(1-naphthyl)-N-phenylamino]biphenyl ($\alpha$-NPD) in top-emitting organic light-emitting diode (TEOLED). The operation voltage at the current density of $1mA/cm^2$ of TEOLEDs decreased from 6.2 V to 5.0 V as the $CuO_x$ layer inserted between Ag and $\alpha$-NPD. $\alpha$-NPD was deposited in situ on Ag/$CuO_x$ and Ag anodes, and their interface dipole energies were quantitatively determined using synchrotron radiation photoemission spectroscopy. The dipole energy of Ag/$CuO_x$ was lower by 0.05 eV even though Ag/$CuO_x$ had a higher work function. The work function of Ag/$CuO_x$ is higher by 0.53 eV than that of Ag, resulting in a decrease of the turn-on voltage via reduction of hole injection barrier.

• Journal of Powder Materials
• /
• v.25 no.5
• /
• pp.408-414
• /
• 2018

This study investigates the microstructure and wear properties of cermet (ceramic + metal) coating materials manufactured using high velocity oxygen fuel (HVOF) process. Three types of HVOF coating layers are formed by depositing WC-12Co, WC-20Cr-7Ni, and Cr3C2-20NiCr (wt.%) powders on S45C steel substrate. The porosities of the coating layers are $1{\pm}0.5%$ for all three specimens. Microstructural analysis confirms the formation of second carbide phases of $W_2C$, $Co_6W_6C$, and $Cr_7C_3$ owing to decarburizing of WC phases on WC-based coating layers. In the case of WC-12Co coating, which has a high ratio of $W_2C$ phase with high brittleness, the interface property between the carbide and the metal binder slightly decreases. In the $Cr_3C_2-20CrNi$ coating layer, decarburizing almost does not occur, but fine cavities exist between the splats. The wear loss occurs in the descending order of $Cr_3C_2-20NiCr$, WC-12Co, and WC-20Cr-7Ni, where WC-20Cr-7Ni achieves the highest wear resistance property. It can be inferred that the ratio of the carbide and the binding properties between carbide-binder and binder-binder in a cermet coating material manufactured with HVOF as the primary factors determine the wear properties of the cermet coating material.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.210-218
• /
• 2020

A T-800 (Co-Mo-Cr) coating material is fabricated using Co-Mo-Cr powder feedstock and laser cladding. The microstructure and melted Al erosion properties of the laser-cladded T-800 coating material are investigated. The Al erosion properties of the HVOF-sprayed MoB-CoCr and bulk T-800 material are also examined and compared with the laser-cladded T-800 coating material. Co and lave phases (Co₂MoCr and Co₃Mo₂Si) are detected in both the laser-cladded T-800 coating and the bulk T-800 materials. However, the sizes of the lave phases are measured as 7.9 ㎛ and 60.6 ㎛ for the laser-cladded and bulk T-800 materials, respectively. After the Al erosion tests, the erosion layer thicknesses of the three materials are measured as 91.50 ㎛ (HVOF MoB-CoCr coating), 204.83 ㎛ (laser cladded T-800), and 226.33 ㎛ (bulk T-800). In the HVOF MoB-CoCr coating material, coarse cracks and delamination of the coating layer are observed. On the other hand, no cracks or local delamination of the coating layer are detected in the laser T-800 material even after the Al erosion test. Based on the above results, the authors discuss the appropriate material and process that could replace conventional bulk T-800 materials used as molten Al pots.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.620-632
• /
• 1994

To study the distribution of ichthyoplankton in Asan Bay, samples were collected with a Bongo net at 8 stations from April, July and October of 1991, and January of 1992. The dominant fish eggs included the eggs of Nibea spp., Engraulis japonica, Callionymus spp., and others. The eggs of Nibea spp. and Engraulis japonica were $97.70\%$ and $1.30\%$ of the total egg abundance, respectively. Twenty three species of fish larvae were identified. The predominant species were gobiid fishes accounting for $32.84\%$ of the all fish larvae, and followed by Ammodytes personatus($16.69\%$). Other major species were Anguilla japonica, Nibea spp., Pampus echinogaster and Engrualis japonica. These 6 taxa constituted $90.40\%$ of the total larvae collected.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.14-21
• /
• 2017

A Linear parameterized Sigma-Pi neural network (SPNN) is applied to a tilt-duct unmanned aerial vehicle (UAV) which has a very large longitudinal stability ($C_{L{\alpha}}$). It is uncontrollable by a proportional, integral, derivative (PID) controller due to heavy stability. It is shown that the combined inner loop and outer loop of SPNN controllers could overcome the sluggish longitudinal dynamics using a method of dynamic inversion and pseudo-control to compensate for reference model error. The simulation results of the way point guidance are presented to evaluate the performance of SPNN in comparison to a PID controller.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.67-73
• /
• 2011

Handover in high speed mobile communication service, in particulary mobile WiMAX is supported efficiency mobility to 120km/h speed. But, in order to accommodate number of user increment in a cell, wireless network is increment to microcell and picocell by allocate bandwidth and by decrease cell size. handover is occurrent and increment connection failure ratio In this result. IEEE 802.16 standard is support seamless connection through handover optimization scheme. But because authentication process is abbreviate, network weakness is exposure. In this paper, we propose handover scheme for support realtime service as VoIP, Picure communication, Streaming Data Service in order to support partially encryption method. In experiment, proposed scheme is proof which process time is increment 20% more than previous scheme.

• The Journal of Fisheries Business Administration
• /
• v.33 no.2
• /
• pp.49-74
• /
• 2002

This study examines, from an economic perspective, the reasons for introducing a resource taxe system into the Korean off-shore fisheries and the type of charges that can be introduced. Following a review of the charging systems in other advanced fisheries, we consider the types of charging scheme and some implications for the Korean off-shore fishing industry. Charges could be used for recovering part of fisheries management cost from the industry(i.e. administration, enforcement, research, etc). This can be justified on the grounds that the fishing industry is the main beneficiary of management and that it should therefore bear at least part of the cost involved. It is arguable that publicly-funded management is in effect a subsidy to the industry. Using charges to raise revenue in excess of the cost of management would represent the extraction of a public rent from the fishery resource, but the short-run financial consqquences for the industry would be significant. Results from a qualtitative analysis suggest that while any new charge will have a significant financial impact on the industry in the short run, a landings tax would have a lesser impact on fleet structure in the long run. The study also considers the possibility of a capital gains tax on license sales in order to recover some rent from the industry. Despite any short run-financial consequences, making the fishing industry pay for at least some of the cost of management could benefit the industry as a whole if there were more cooperation between industry and managers as a result. It is acknowledged, however, that there could be disputes over the relative management costs of different sectors of the industry. Even though this study makes few specific recommendations about charging the Korean off-shore fishing industry, it does advise that the issue be reviewed on the basis of the entire Korea fisheries. Finally, the study notes that insufficient data are available on the economic performance of the Korean off-shore fishing vessels and it recommands that a comprehensive system for the collection of costs and earnings data be put in place. It also suggests that MOMAF pay much attention to the permit right market and its transactions.

• The Journal of Fisheries Business Administration
• /
• v.47 no.2
• /
• pp.15-32
• /
• 2016

The Association of Southeast Asian Nations(ASEAN) has been the most essential organization in Asia. In spite of the world economic crisis, Southeast Asian countries have shown fast economic growth since 2000, and they have been actively expanding investments and trades especially with major countries. Research on competitiveness in ASEAN market has spawned an increasingly large literature, but empirical research on the determinants of Korea's export to ASEAN is limited. The purpose of this study is to draw out the determinant of Korean fisheries export to ASEAN by carrying out a panel analysis. For achieving such a purpose, pooled OLS, Hausman Test, Fixed Effect, Random Effect are performed. The last 20 years' data over the period of 1995 to 2014 concentrated on the ASEAN 6 countries such as Indonesia, Malaysia, Philippine, Singapore, Thailand, Vietnam is used in this study. Amount of aquatic products export to ASEAN is used as the dependent variable; real exchange rate, real GDP, relative price level and GDP per capita are used as the explanatory variables and FTA as dummy variable. Empirical results show that fixed-effect analysis is the best model among all the models. As the fixed effect model shows, real exchange rate, real GDP, GDP per capita and dummy variable(FTA) play positive and statistically significant roles in fisheries export to ASEAN, while price variable plays a negative and statistically significant role to the dependent variable.

• The Journal of Fisheries Business Administration
• /
• v.44 no.2
• /
• pp.19-33
• /
• 2013

China is the world's largest producer of aquatic products and its fishery sector is comprised primarily of aquaculture facilities, both fresh and seawater, and a much smaller wild catch component. The expansion of the aquaculture sector continues to boost China's aquatic output. The increase is attributable to several factors. Among them rapidly growing domestic demand is no doubt one of the most important reasons. Rapid economic growth and rising disposable income are influencing domestic consumption and the economic recovery of major import markets is further stimulating consumption of China's aquatic products. This paper tries to examine the status, trend and reasons of consumption of aquatic products in China. Based on the analysis on the consumption of aquatic products and its change, this paper utilizes panel regression model to estimate the affecting factors of aquatic products consumption in China. By using panel data between 1997 and 2010, the results indicate that income, urbanization, aging and dummy variable have positive effects and fish price index has negative effect on China's aquatic products consumption as predicted. However, effects of meat consumption and education on fishery consumption are totally opposite with our predictions. In other words, it turns out that meat consumption has positive effect on fish consumption while education turns out to have negative effect. Finally the member of household does not show any significant effect on consumption of aquatic products in China.