• Journal of KIISE:Software and Applications
• /
• v.34 no.11
• /
• pp.991-1000
• /
• 2007

A new robust approach to detect vehicles in a single frame of traffic scenes is presented. The method is based on the multi-level shadow classification, which has been shown to have the capability of extracting correct shadow shapes regardless of the operating conditions. The rationale of this classification is supported by the fact that shadow regions underneath vehicles usually exhibit darker gray level regardless of the vehicle brightness and illuminating conditions. Classified shadows provide string clues on the presence of vehicles. Unlike other schemes, neither background nor temporal information is utilized; thereby the performance is robust to the abrupt change of weather and the traffic congestion. By a simple evidential reasoning, the shadow evidences are combined with bright evidences to locate correct position of vehicles. Experimental results show the missing rate ranges form 0.9% to 7.2%, while the false alarm rate is below 4% for six traffic scenes sets under different operating conditions. The processing speed for more than 70 frames per second could be obtained for nominal image size, which makes the real-time implementation of measuring the traffic parameters possible.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.377-385
• /
• 2022

Surface morphology and adsorption characteristics of charcoals prepared from Korean traditional kiln were analyzed, and their moisture adsorption capacities were examined with respect to humidity and temperature change. Moisture adsorption capacities of red-clay powder, activated carbon fiber fabric (ACF fabric) and activated carbon fiber paper(ACF paper) were also examined to compare with those of charcoals. Moisture adsorption capacity of charcoal was low less than 45% humidity due to its hydrophobic property, but it slowly and linearly increased as increasing the humidity. Moisture adsorption capacity of red-clay powder was similar to charcoal at low level humidity, it increased exponentially as increasing the humidity showing Type V adsorption isotherm. Therefore, the weather forecast annal prepared by employee of weather centre in Joseon Dynasty is experimentally approved. ACF fabric and ACF paper show excellent moisture adsorption capacities, which can be used to humidity measuring sensor. Adsorption isotherm of charcoal slice was peculear showing the mixed Type I and Type IV due to low-pressure hysteresis that was occurred from embedment of nitrogen in crevice of charcoal. The specific surface area of charcoal increased by grinding charcoal slice to powder, resulted in increasing the desorption amount of adsorbent at low relative pressure.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.277-283
• /
• 2006

In this study, butane 100% was used as fuel to verify the real fuel effect such as vapor pressure variation due to temperature change. A MPI fuel injection system for V-6 engine, which has reverse 'L' type cross section to minimize the possibility of liquid phase injection, was composed and one bank was operated under sequential injection scheme. Flow rate were measured according to injection duration, interval, and pressure. Also occurring of liquid phase injection was monitored with varying vaporizer and fuel rail temperature. The result shows that basic characteristics of injection is a relatively difference between air and LPG injection. Under cold start condition, however, the occurrence of liquid injection becomes more severe as the pressure increases, and sufficiently high temperature both in vaporizer and fuel rail is very important to insure gaseous injection. In addition, the temperature of vaporizer plays more important role in keeping LPG vapor state and the reverse 'L' type cross section of the rail is available to prevent liquid injection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.214-214
• /
• 1999

다이아몬드를 반도체용 열방산용기판 등으로 사용하기 위해서는 수백 $\mu\textrm{m}$ 두께의 대면적 웨이퍼가 요구된다. 이를 위해서 DC are jet CVD, MW PACVD, DC PACVD 등이 개발되어, 현재 4"에서 8"까지의 많은 문제를 일으키고 있다. 본 연구에서는 multi-cathode DC PACVD법에 의한 4" 다이아몬드 웨이퍼의 합성과 합성된 막의 특성변화에 대한 연구를 수행하였다. 또한, 웨이퍼의 휨과 crack 발생거동과 대한 고찰을 통래 휨과 crack이 없는 웨이퍼의 제작방법을 고안하였다. 사용된 음극의 수는 일곱 개이며, 투입된 power는 각 음극 당 약 2.5kW(4.1 A-600V)이었다. 사용된 기판의 크기는 직경 4"이었다. 합성압력은 100Torr, 가스유량은 150sccm, 증착온도는 125$0^{\circ}C$~131$0^{\circ}C$, 수소가스네 메탄조성은 5%~8%이었다. 합성 중 막에 인가되는 응력은 합성 중 증착온도의 변화에 의해 제어하였다. 막의 결정도는 Raman spectroscopy 및 열전도도를 측정을 통해 분석하였다. 성장속도 및 다이아몬드 peak의 반가폭은 메탄조성 증가(5%~8%)에 따라 증가하여 각각 6.6~10.5$\mu\textrm{m}$/h 및 3.8~5.2 cm-1의 분포를 보였다. 6%CH4 및 7%CH4에서 합성된 웨이퍼에서 측정된 막의 열전도도는 11W/cmK~13W/cmK 정도로 높게 나타났다. 막두께의 uniformity는 최대 3.5%로 매우 균일하였다. 막에 인가되는 응력의 제어로 직경 4"k 합성면적에서 두께 1mm 이상의 균열 및 휨이 없는 다이아몬드 자유막 웨이퍼를 합성할 수 있었다.다이아몬드 자유막 웨이퍼를 합성할 수 있었다.active ion에 의해 sputtering 이 된다. 이때 plasma 처리기의 polymer 기판 후면에 magnet를 설치하여 높은 ionization을 발생시켜 처리 효과를 한층 높여 주었다. 이 plasma 처리는 표면 청정화, 표면 etching 이 동시에 행하는 것과 함께 장시간 처리에 의해 표면에서는 미세한 과, C=C기, -C-O-의 극성기의 도입에 의한 표면 개량이 된다는 것을 관찰할 수 있다. OPP polymer 표면을 Ar 100%로 plasma 처리한 경우 C-O, C=O 등의 carbonyl가 발생됨을 알 수 있었다. C-O, C=O 등의 carbynyl polor group이 도입됨에 따라 sputter된 Al의 접착력이 향상됨을 알 수 있으며, TEM 관찰 결과 grain size도 상당히 작아짐을 알 수 있었다.onte-Carlo 방법으로 처리하였다. 정지기장해석의 경우 상용 S/W인 Vector Fields를 사용하였다. 이를 통해 sputter 내 플라즈마 특성, target으로 입사하는 이온에너지 및 각 분포, 이들이 target erosion 형상에 미치는 영향을 살펴보았다. 또한 이들 결과로부터 간단한 sputtering 모델을 사용하여 target으로부터 sputter된 입자들이 substrate에 부착되는 현상을 Monte-Carlo 방법으로 추적하여 성막특성도 살펴보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.159-159
• /
• 1999

니켈 산화물 박막을 전자비임 증착법으로 기판온도는 RT~25$0^{\circ}C$의 범위에서 제작하였다. 제작시 초기 베이스 압력은 2$\times$10-6mbar로 하고 산소주입후 작업진공도를 3$\times$10-4mbar로 유지하여 증착하였다. 제작시 기판온도에 따라 제작된 시료들은 각각 X선회절장치(XRD)로 막의 구조과 그림과 같이 입방체 구조 또는 팔면체구조를 갖음을 알 수 있었으며 막의 표면형상은 SEM을 이용하여 분석하였다. 각각의 여러 기판온도에 따라 제작된 니켈 산화물 박막의 전기 화학적인 특성을 분석하기 위해 순환전압전류법을 이용하였다. 또한, 전기적인 광학소자로써의 특성을 분석하기 위해 UV-Vis 광분광기를 사용하여 투과율을 측정하여 그 특성을 알아보았다. 순환전압전류법에 의한 각 시료에 대한 박막의 전기화학적 특성은 0.5M KOH 전해질 수용액에서 기판온도가 150~20$0^{\circ}C$로 제작된 니켈 산화물 박막이 다른 온도에서 제작된 시료들보다 높은 전기화학적 안정성을 보임을 알 수 있었다. 마찬가지로 광학적 특성에서 착색과 탈색의 순환과정시 분광광도계에서 나타나는 광투과율을 비교해 보면 100~20$0^{\circ}C$에서 제작된 니켈 산화물 박막이 가역적인 착탈색의 색변화가 현저하게 나타남을 알 수 있었다. 결과적으로 광학적 특성 및 전기화학적 안정성 분석으로 인해 막의수명과 전기적착색 물질의 특성면에서 증착시 기판온도가 150~20$0^{\circ}C$에서 제작된 시료가 가장 내구성면에서 막의 이온 누적이 적고 활성적인 광투과율의 성질을 갖는다는 것이다. 이와같이 니켈산화물 박막제작시 기판온도가 전기적착색물질의 특성과 내구성에 큰 영향을 미침을 분석할 수 있었다.electron Microscopy)과 AFM(Atomim Force microscopy)으로 증착박 표면의 topology와 roughness를 관찰하였다. grain의 크기는 10nm에서 150nm이었고 증착막의 roughness는 4.2nm이었다. 그리고 이 산화막에 전극을 형성하여 유전 상수와 손실률 등을 측정하였다. 이와 같이 plasma를 이용한 3-beam에 의한 증착은 금속의 산화막을 얻는데 유용한 기술로 광학 재료 및 유전 재료의 개발 및 연구에 많이 사용될 것으로 기대된다.소분압 조건에서 RuO2의 형성을 관찰하였으며, 이것은 열역학적인 계산을 통해서 잘 설명할 수 있었다.0$\mu\textrm{m}$, 코일간의 간격은 100$\mu\textrm{m}$였다. 제조된 박막 인덕터는 5MHz에서 1.0$\mu$H의 인덕턴스를 나타내었으며 dc current dervability는 100mA까지 유지되었다. CeO2 박막과 Si 사이의 결함때문이라고 사료된다.phology 관찰결과 Ge 함량이 높은 박막의 입계가 다결정 Si의 입계에 비해 훨씬 큰 것으로 나타났으며 근 값도 증가하는 것으로 나타났다. 포유동물 세포에 유전자 발현벡터로써 사용할 수 있음으로 post-genomics시대에 다양한 종류의 단백질 기능연구에 맡은 도움이 되리라 기대한다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.234-244
• /
• 2013

This study was conducted to determine the factors affecting to seed characteristics and seedling growth of Zelkova serrata. The seeds were collected from sixteen populations of Z. serrata and the seed characteristics (i.e., seed length, width, weight and full seed rate) were measured. We also measured the 1-year-old seedling growth of each population at nursery. All seed characteristics showed significant differences in population level. Seed length and seed width were positively correlated with latitude, longitude, altitude and distance from coast line of sampling site. Seed length and seed width also negatively correlated with annual mean temperature, mean temperature of growing season (Mar.~Oct.). The ratio of seed length/seed width showed inverse trend in case of seed length and seed width. Seed weight/1,000 grains had no correlation with geographic factors but showed negative correlation with annual mean dryness index. Seed weight/L showed negative correlation with latitude and longitude and positive correlation with mean temperature of growing season of sampling site. Full seed rate showed negative correlation with latitude, longitude and annual mean dryness index of sampling site. There were significant differences among populations, among family within population and among individuals within family in seedling growth. Height and diameter of root collar of seedling showed negative correlation with longitude and mean humidity of growing season of sampling site. Height growth of seedlings was not correlated with any seed characteristics but, diameter at root collar showed low negative correlation with seed weight/1,000 grains and seed weight/L. We discussed the implications of the results in view of tree improvement of Z. serrata.

• Journal of Korean Society of Forest Science
• /
• v.38 no.1
• /
• pp.33-45
• /
• 1978

The purpose of present study is to analyze the genetic variation of natural stand of Pinus densiflora. In 1975 following after the selection of 1974, twenty trees from each of three natural populations of the species were selected and their open-pollinated seeds were collected, and the locations and conditions of the populations ate presented in table 1, 2 and figure 1. Some morphological traits of the populations were already detailed in our second report of this series, in which Myong-Ju and Ul-Jin populations were regarded to be superior phenotypically to suweon population. The morphological traits of cone, seed and seed-wing, and also the growth performances and needle characters of the seedling were observed in the present study according to the previous methods. The results obtained are summarized as follows; 1. The meteorological data obtained by averaging the records of 30 year period (1931~1960) measured from the nearest meteorological stations to each population are shown in fig.2, 3, 4. The distributional patterns of investigated climate factors are generally considered to be similar among the locations. However, the precipitation density during growing season and the air temperature during dormant season on Suweon area, population 6, were quite different from those of the other areas. 2. The measurements of fresh cone weight, length, diameter and cone index, i.e., length to diameter ratio are presented in table 7. As shown in table 7, all these traits except for cone diameter seem to be highly significant in population differences and family differences within population. 3. The morphological traits of seed and seed-wing are detailed in table 8, 9, and highly significant differences are recognized among the populations and the families within population in seed-wing length, seed-wing index, seed weight, seed-length and seed index but not among the populations in the other observed traits. The values of correlation coefficient between the characters of cone and seed are given in table 10 and the positive significant correlations can be observed in the most parts of the compared traits. 4. Significant statistical differences among populations and families within population are observed in the growth performances of 1-0 and 1-1 seedling height of these progenies. But the differences in root collar diameter are shown only among families within population. As shown in table 13, the most parts of correlations are not significant statistically between the growth performances of seedling and the seed characters. 5. The number of stomata row on both sides of needle and the serration density were measured in the seedlings from each of the families of the three populations. As shown in table 15, statistical differences are considered to be significant among the populations and among the families within population in serration density but not among the populations in stomata row on both sides of the needle. The results differ from those of the third report of this series. Even if one of the reason seems to be the diversity of selected populations, it could not be confirmed definitely. The correlations between progenies and parents are not generally observed in the investigated traits of needle as shown in table 16.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.20-30
• /
• 1979

The purpose of present study is to analyze the genetic variation of natural stand of Pinus densiflora. In 1976 following after the seletion of 1974 and 1975, twenty trees from each of three natural populations of the species were selected and seeds were collected, and the locations and conditions of populations are presented in table 1, 2 and figure 1. Some morphological traits of the populations were already detailed in our fifth report of this series. The morphological traits of cone, seed and seed-wing, and also the growth performances and needle characters of the seedling were observed in the present study according to the previous methods. The results obtained are summarized as follows; 1. The meteorological data obtained by averaging the records of 30 year period(1931~1960) measured from the nearest meteorological station to each population are shown in fig. 2, 3, 4. The distributional patterns of investigated climate factors are generally considered to be similar among the locations. However, the precipitation density during growing season and the air temperature during dormant season on Samchuk area (Pop. 9) were quite different from those of the other areas. 2. The measurements of fresh cone weight, length, diameter and cone index (i.e.: length to diameter ratio) are presented in table 7. As shown in table 7, all these traits except for cone diameter seem to be not significant in population and to be highly significant in family differences within population. 3. The morohological traits of seed and seed-wing are detailed in table 8, 9, and highly significant differences are recognized among the populations and the families within population in seed weight, seed length, seed thickness but not among the populations in the other observed traits. The values of correlation between the characteristics of cone and seed are presented in table 12. As shown, the correlation between cone length and seed wing length, between seed wing width and seed width were significantly positive in population 8 and 9 but in population 7. The positive correlations between seed length and seed width were calculated in all populations studied 4. Significant statistical differences among populations and families within population are observed in the growth performances of 1-0 seedling height of these progenies. But the differences in 1-1 seedling height and root collar diameter are shown only among familes within population. As shown in table 13, the most parts of correlations are not significant statistically between the growth performances of seedling and the seed characters. 5. As shown in table 15, statistical differences are considered to be significant among the populations in stomata row on both sides of the needle but not in serration density. The correlations between progenies and parents are not generally observed in the investigated traits of needle as shown in table 16.