• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.81-92
• /
• 2001

According to analyses of high-resolution seismic profiles (air gun, sparker, and SBP) and a deep-drill core(YSDP 105) in the mid-eastern Yellow Sea, stratigraphic and geoacoustic models have been established and seismo-acoustic modeling has been fulfilled using ray tracing of finite element method. Stratigraphic model reflects seismo-, litho-, and chrono-stratigraphic sequences formed under a significant influence of Quaternary glacio-eustatic sea-level fluctuations. Each sequence consists of terrestrial to very-shallow-marine coarse-grained lowstand systems tract and tidal fine-grained transgressive to highstand systems tract. Based on mean grain-size data (121 samples) of the drill core, bulk density and P-wave velocity of depositional units have been inferred and extrapolated down to a depth of the recovery using the Hamilton's regression equations. As goo-acoustic parameters, the 121 pairs of bulk density and P-wave velocity have been averaged on each unit of the stratigraphic model. As a result of computer ray-tracing simulation of the subsurface strata, we have found that there are complex ray paths and many acoustic-shadow zones owing to the presence of irregular layer boundaries and low-velocity layers.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.113-139
• /
• 2007

This study aims to, looking from a standpoint of network, has investigated the shipping industry's B2B e-marketplace, the characteristics that can earn electronic trust from the users, and characteristics of the web-site. It has examined the mechanism whereby electronic trust be earned and how it affects web-site involvement and service transaction intention. Ultimately, The study attempts to make proposals whereby such trust can lead for a cooperative trading community in the shipping industry's B2B e-marketplace The Covalence structural equation modeling was designed and empirically tested for the shipping industry's B2B e-marketplace. The shipping industry employees were given questionnaires and data were analyzed. Except for perceived security of the three characteristic factors on the web-site, the perceived site quality and characteristics factors in operation only affected co-variables. Transaction Fairness was determined to be the most important factor among exogenous factors increasing electronic trust. With regards to transaction rules, if a transaction is beneficial only to one side, then no long term transaction will not take place. If the concerned parties properly recognize that transaction fairness is crucial to electronic transaction, then it will enormously contribute to successful operations of shipping e-marketplace. Also, Perceived efficiency in transaction also affects electronic trust. This reduces transaction costs and speeds up and simplifies the transaction process. It has reduced greater time and costs than existing off-line transaction, and would positively affect electronic trust. By making an open forum for participants to obtain information for transaction, they can gather useful information, and at the same time, the web-site operator can provide information, which, in turn, will increase electronic trust in electronic transaction. Furthermore, such formation of trust in electronic transaction influences shipping companies in such a way that they will want to continuously participate in the transaction, raising web-site involvement. The result of increased trust is that shipping companies in the future will do business with each other and form a foundation for continuous transactions amongst themselves. Consequently, the formation of trust in electronic transaction greatly influences web-site involvement and service transaction intention. The results of the study have again proved that in order to maintain continuous business relationship with the current clients, electronic trust in virtual space, which operates the shipping industry's B2B e-marketplace, is important for the interested parties.

• Korea journal of population studies
• /
• v.25 no.2
• /
• pp.5-40
• /
• 2002

Using detailed data of women's work history, this study analyses the transition process between employment and non-employment over the life history in order to identity individual and structural determinants in the processes. Korean women comprise very heterogeneous groups in terms of work continuity: one group having a continuous work history and another having an interrupted work experience. While 4.0% of total women have stayed in the labor market since leaving school, 17.3% have not worked outside at all and remaining 87.9% have experienced into and out of the labor market at least once. On the average, the cumulated time of employment per woman is 8.2 years and the cumulated time of unemployment is 13.1 years. Thus Korean women work a total of only 38.5% of their whole lifetime after leaving school. We can conclude that the increase of the employment rate of married women in Korea since the 1970s has been due to the increase of the new entrants with short or little working careers into the labor market, not to the increase of women's work continuity on the whole. A women's educational achievement does not seem to be positively related to employment duration, contrary to the suggestion of the human capital theory, Rather, family variables, especially the existence of the child under 6 yens old, is a more significant determining factor for an individual's exit from employment. And there is little difference among different age cohorts which implies little improvement in the employment continuity of younger women. This study also documents the importance of structural variables, such as the type of occupation, as significant determining factors for the hazard rate. Specially women with professional jobs tend to stay longer in the labor market. Therefore, women's entry into more professional occupations is expected to contribute to the continuity of employment. Our results also show that duration-dependence is not spurious. When unobserved heterogeneity is controlled, the negative relation between the rate from employment and the duration of employment does not disappear.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.815-822
• /
• 2006

The purposes of this study were to investigate the consumer's perception of the subject to manage the foodservice operation in the university, and to analyze the effects of consumer's perception of the university foodservice qualify on intent to revisit and intent to recommend. The questionnaires were distributed to 575 students in the K University located in Masan, who were sampled by proportionate stratified sampling method. The surveys were peformed from May 17 to June 2, 2005. The 566 questionnaires were responded, and 6 unusable questionnaires were excluded, then 560 were used for the final analysis (response rate: 97.4%). For the statistical analysis, SPSS (12.0) was used to conduct the descriptive analysis, factor analysis reliability analysis, and multiple regression analysis. The results of this study were as follows: First 254 respondants (47.3%) did not know that their foodservice operation was managed by contract foodservice company, and 374 students (66.8%) did not know the name of the contract foodservice company which runned their foodservice operation. Second, the food factor of university foodservice quality had a significant positive effect on intent to revisit (P<0.001), and the food factor of university foodservice quality also had a significant positive effect on Intent to recommend (p<0.001). It was concluded that as the food factor of university foodservice qualify Increased, the intent to revisit and the intent to recommend the university foodservice increased. So when university foodservice managers plan the foodservice operation strategy, they should focus on increasing the perception of customers' foodservice quality and also advertising contract foodservice company's brand name.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.422-429
• /
• 2013

It is generally known that the increase of the Earth surface temperature due to the global warming together with the land desertification by rapid urban development has caused severe climate and weather change. In desert or desertification land, it is observed that there are always severe flooding phenomena, even if desert sand has the high porosity, which could be believed as the favorable condition of rain water infiltration into ground water. The high runoff feature causes possibly another heavy rain by quick evaporation with the depletion of underground water due to the lack of infiltration. The basic physics of desert flooding is reasonably assumed due to the thermal buoyancy of the higher temperature of the soil temperature than that of the rain drop. Considering the importance of this topic associated with water resource management and climate disaster prevention, no systematic investigation has, however, been reported in literature. In this study, therefore, a laboratory scale experiment together with the effort of numerical calculation have been performed to evaluate quantitatively the basic hypothesis of run-off mechanism caused by the increase of soil temperature. To this end, first, of all, a series of experiment has been made repeatedly with the change of soil temperature with well-sorted coarse sand having porosity of 35% and particle diameter, 2.0 mm. In specific, in case 1, the ground surface temperature was kept at $15^{\circ}C$, while in case 2 that was high enough at $70^{\circ}C$. The temperature of $70^{\circ}C$ was tested as this try since the informal measured surface temperature of black sand in California's Coachella Valley up to at 191 deg. $^{\circ}F$ ($88^{\circ}C$). Based on the experimental study, it is observed that the amount of runoff at $70^{\circ}C$ was higher more than 5% compared to that at $15^{\circ}C$. Further, the relative amount of infiltration by the decrease of the surface temperature from 70 to $15^{\circ}C$ is about more than 30%. The result of numerical calculation performed was well agreed with the experimental data, that is, the increase of runoff in calculation as 4.6%. Doing this successfully, a basic but important research could be made in the near future for the more complex and advanced topic for this topic.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.38-45
• /
• 1999

Objectives: We explored the characteristics of physiological variables such as electrodermal response(EDR) and electromyography(EMG) in patients with insomnia, panic disorder, and other anxiety disorders. we aimed to decide the minimum sessions in biofeedback treatment to make the treatment effective and examine the effects of long-term biofeedback treatment by measuring the physiological variables. Methods: Thirty seven outpatients who received biofeedback treatment were divided into 3 groups according to the number of biofeedback sessions(patients who received 4-5 sessions, who received 6-9 sessions, and who received more than 10 sessions). We measured mean and delta values of EDR and EMG levels, and the Hamilton Anxiety Rating Scale(HARS), and Slef-Relaxation Inventory(SRI) in all patients. Data were analyzed by t-test and repeated measures analysis of variance. Results: The mean and delta values of EDR and EMG levels were not different among the 3 groups during the first 4 biofeedback sessions. However, patients who received more than 10 biofeedback sessions had higher baseline mean EDR value(F=2.233, p=0.036) in the first session, compared with other patients. In patients who received more than 10 biofeedback sessions, mean EDR was significantly reduced after $5^{th}$ session(F=10.41, p<0.01). They showed significant improvement in SRI scores at 12th biofeedback session(t=2.726, p<0.05) and in HARS scores at $6^{th}$(t=3.10, p<0.05) and $12^{th}$ biofeedback session(t=10.93, p<0.001). Conclusions: Wesuggest that patients should receive more than 5 biofeedback sessions to experience internal cues and get a good clinical response to biofeedback treatment.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.137-155
• /
• 1999

Recently, Televiewer(Borehole Acoustic Scanner(Televiewer)) has come to be widely used specially for the general engineering construction design. The Televiewer tool using a focussed acoustic beam is to detect the amplitude and traveltime of each reflected acoustic signal at the wall, resulting in the amplitude- and traveltime image respectively. Fractures can be well detected, because they easily scatter the acoustic energy due to the highly narrow beam. In addition, the drilling work will rough the borehole wall so that the acoustic energy can be scattered simply due to the roughness of the wall. Thus, the amplitude level can be directed associated with the elastic properties(impedance) and the hardness of the rock as well. Meanwhile, the traveltime image provides an information about the borehole shape and can be converted to a high precision 3D caliper log(max. 288 arms). In this paper, based on the high resolution of Televiewer images, general evaluation methods are illustrated to derive very reliable rock parameters.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.329-333
• /
• 2006

Most of volcanic ash soils in South Korea are distributed in Jeju province which is an island placed on southern part of Korea and has steep slope mountain area. There are many soils containing high contents of organic matter (OM) derived from volcanic ash in Jejudo, also. Therefore, irrigation and drainage in volcanic ash soil different with general soil which has low OM content have to be applied with another management way, but studies searching appropriate methods for them are set on insufficient situation because the area of volcanic ash soil in South Korea is only 1.3% (130,000ha). This study was conducted for analysis of soil water content and irrigation quantity appropriate for crops cultivated in volcanic ash soil with high OM content. Although soils with different soil color have the same soil texture, soil water characteristics curve by soil color showed the difference of water retention capability by OM content. But, this characteristics classified with soil color could be unified by scaling technique with similitude analysis method which get dimensionless water content using a present water content, a residual water content and saturated water content (or water content at 10kPa). A relation of gravimetric soil water content (GSWC) and dimensionless water content by the results showed a form of power function. The dimensionless water content (DWC) express a relative saturation degree of present water content. This was also expressed by van Genuchten model which describe the relation between relative saturation degrees and matric potentials. These results on soil water characteristics curve (SWCC) of volcanic ash soil will be the basic of irrigation plan in area having high organic contents into soil.

• Journal of Korea Water Resources Association
• /
• v.57 no.1
• /
• pp.1-8
• /
• 2024

Persistent droughts due to climate change will intensify water shortage problems in Korea. According to the 1st National Water Management Plan, the shortage of domestic and industrial waters is projected to be 0.07 billion m³/year under a 50-year drought event. A long-term prediction of water demand is essential for effectively responding to water shortage problems. Unlike industrial water, which has a relatively constant monthly usage, domestic water is analyzed on monthly basis due to apparent monthly usage patterns. We analyzed monthly water usage patterns using water usage data from 2017 to 2021 in Chungcheong, South Korea. The monthly water usage rate was calculated by dividing monthly water usage by annual water usage. We also calculated the water distribution rate considering correlations between water usage rate and climate variables. The division method that divided the monthly water usage rate by monthly average temperature resulted in the smallest absolute error. Using the division method with average temperature, we calculated the water distribution rates for the Chungcheong region. Then we predicted future water usage rates in the Chungcheong region by multiplying the average temperature of the SSP5-8.5 scenario and the water distribution rate. As a result, the average of the maximum water usage rate increased from 1.16 to 1.29 and the average of the minimum water usage rate decreased from 0.86 to 0.84, and the first quartile decreased from 0.95 to 0.93 and the third quartile increased from 1.04 to 1.06. Therefore, it is expected that the variability in monthly water usage rates will increase in the future.