• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.273-281
• /
• 2016

In this study, after carrying out a bending test that targeted the frames of plastic film greenhouse, the load-displacement relationship was analyzed to be used as basic data to develop greenhouse construction and maintenance guidelines. As a result, regardless of the shapes of the specimen, the yield and the maximum load increased as the size of the specimen increased. The displacement also showed the same pattern. A steel pipe showed lower yield and maximum load than a square pipe, and the displacement was large. In the steel pipe case, the displacement under the yield and maximum load was in the range of approximately 1.42-4.20mm and 5.80-24.13mm, respectively. In the square pipe case, the displacement under the yield and maximum load was in the range of approximately 1.62-3.00mm and 3.13-8.01mm, respectively. Further, a large difference was observed between the result of this test and the values calculated by a conventionally provided standard. In particular, not much difference was found from the result of this test in the case of a purlin member from the values provided by previous researches. However, a large difference was observed in the column or main rafter members. Furthermore, when a wide-span and venlo type, which is a glasshouse, was used as a target(h/100 and h/80), the displacement under the yield and maximum load was approximately 28.0mm and 35.0mm, respectively, which showed a large difference compared with the Netherlands standard(14.0mm) of a glasshouse. Further, in the main rafter case, a large difference was observed in the displacement limit according to the width(i.e., span) of the greenhouse where members are used. Therefore, because the displacement limit can vary depending on various factors such as type, form, and size of a greenhouse, we determined that studies or tests that consider these factors should be carried out to reflect them in the construction and maintenance of greenhouses.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.315-326
• /
• 2015

This study has started from a curiosity about how the concept and characteristics of mise en abyme, which is one of meta-discourse in the contemporary aesthetics and has affected every aspect of modern philosophy, art, and culture, are expressed in modern architecture. 'Mise en abyme' is a technique mainly used by writers of the nouveau roman after it was introduced first in the work of novelist Andre Gide; this technique of artistic expression has been extended across the whole contemporary art and has become the meta-discourse which essentially makes its appearance in the art after postmodernism. 'Mise en abyme', meaning endless formation of image between two mirrors, got involved with discourse of the various philosophers of the time such as Deleuze and Derrida, and was also expressed in the language of architecture by modern architects who have been influenced by their philosophy. In this context, the technique of mise en abyme which is mostly used in art has a relation to methods of space expression of architects. This research studied the characteristics of mise en abyme which show in the expressional method of the modern architecture based on the relationship between the technique of mise en abyme and the modern method of architectural expression. Moreover, on the basis of this an analysis was carried out on architectural works of Jean Nouvel, who uses de-materialization and singularity as the architectural language. Through the research it was confirmed that the characteristics of expression of mise en abyme in architecture are embodied in material of the surface which forms buildings' exterior, or expressed by using reflection and graphical factors. Through analysis this study allows the chance to see that even though the means and field for expressing mise en abyme are different, the characteristics of the fundamental concept are shared among them, and to think about the meaning in the technique of mise en abyme as one yardstick to understand modern architecture in modern times with no specific mainstream.

• Korea Science and Art Forum
• /
• v.28
• /
• pp.23-32
• /
• 2017

The purpose of this study is to contribute to the activation of sports for the disabled people in Korea through the localization of the road racing handcycles. Recently, there are no handcycles produced in Korea, and all the players are using products made in foreign countries. In the case of foreign products, it is made to fit the body shape of foreign athletes. Therefore, when domestic players are using them, they put additional parts to foreign products in order to fit their body shape. This not only adds to the cost burden, but also causes a decrease in the performance of the athletes. In order to overcome these problems, we developed the road racing handcycle in consideration of the body shape of the Koreans and conducted a comparative usability evaluation with the foreign products to evaluate the performance of the developed prototype. Therefore, we analyzed the quantitative and qualitative evaluation results of the prototype produced in the previous study, and developed the Korean road racing handcycle that can improve the competitiveness while considering the shape of domestic players. Based on the problems derived from the first prototype, this study additionally constructed a crank, an air intake part and a discharge part, and a rear anti-shake prevention device. In order to evaluate the usability, we conducted a comparative usability assessment with the foreign products used by the current standing handcycle athletes. The results were measured in the area of effectiveness, efficiency, and satisfaction, and the prototype developed through the research on efficiency and satisfaction excluding effectiveness was evaluated to be higher than those of foreign products. This study will contribute to the improvement of international competitiveness due to import substitution effects of foreign products and exports by lowering the handcycle cost of importing foreign handcycle.

• Korea Science and Art Forum
• /
• v.29
• /
• pp.305-318
• /
• 2017

The need for recognizing the crime in the urban spaces as a social problem and finding out specific approaches such as the study of space design and various guidelines for crime prevention is increasing. In this regard, "Crime Prevention Through Environmental Design" (marked as "CPTED") is actively underway. Yeomri-dong Salt Way is the first place to which the Seoul Crime Prevention Design Project was appled. The business objective of improving the local environment has been implemented rationally through cooperation and voluntary participation between subject of the project executives and community members. Since its efficiency has been proven, the sites have been expanded since then and becomes a benchmarking example of each local government.This kind of problem solving effort has the same context in purpose and direction of the 'Village Art Project' which has been implemented since 2009 with the aim of promoting the culture of the underdeveloped area and encouraging the participation of the residents by introducing the public art. It is noteworthy that this trend is centered around the characteristics of community functions and values. The purpose of this study is to propose the application method of community furniture as a way to increase the efficiency of CPTED to improve the 'quality of life' of residents. To do this, we reviewed CPTED, community design, public art literature and prior research, and identified the problems and implications based on the site visit Yeomri-dong of Seoul and Gamcheon Village of Pusan which is the successful model of "Seoul Root out Crime by Design" and 'Maeulmisul Art Project' respectively. The common elements of the two case places identified in this study are as follows: First, the 'lives' of community residents found its place in the center through the activation of community by collaborative activities in addition to the physical composition of the environment. Second, community design and introduction of public art created a new space, and thereby many people came to visit the village and revitalize the local economy. Third, it strengthened the natural monitoring, the territoriality and control, and the activity increase among the CPTED factors. The psychological aspect of CPTED and the emotional function of public art are fused with the 'community furniture', thereby avoiding a vague or tremendous approach to the public space through a specific local context based on the way of thinking and emotion of local people and it will be possible to create an environment beneficial for all. In this way, the possibility and implication of the fusion of CPTED and public art are expected to be able to reduce the social cost through the construction of the crime prevention infrastructure such as expansion of the CPTED application space, and to suggest a plan to implement the visual amenity as a design strategy to regenerate city.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.119-127
• /
• 2017

Multi-cultural societies in the era of globalization are now common phenomena all over the world. Since our country has already entered into a multi-cultural society, we can no longer stay in the ideology of a single nation. However, current national policies and researches related to multi-cultural society in Korea are limited to institutional aspects and unilateral education of Korean culture. Therefore, this study aims to overcome these practical limitations. The purpose of this study is to acquire design resources in the folk paintings reflecting the culture of each country. And We will develop textile design content that can be applied to most closely related textile products in daily life. Through this, it is aimed to raise awareness of various cultures and to suggest a communication method through cultural exchange. Therefore, this study has developed color and textile pattern design contents through analysis of characteristics of China, Vietnam, and Japan peoples of the three most frequent countries based on the status of domestic marriage immigrants. And tried to apply it immediately to various textile products. The results and contents of the study are as follows. First, the domestic multi-cultural society was formed through international marriage, and the largest number of marriage immigrants came from China, Vietnam, Japan, the Philippines, Cambodia, Thailand, Mongolia and others. Second, folk paintings are suitable for developing textile design contents as an important factor implied by different cultures of different countries. Thirdly, we have developed the pattern and coloring DB and textile pattern design contents by using folk paintings of China, Vietnam and Japan. As a result, we could verify the utilization of contents reflecting the cultural characteristics of each country and the possibility of commercialization. Based on the results of this research, we hope to contribute to the harmonization of the emotional and artistic aspects that naturally share the culture among multi-cultural society members and to develop differentiated related products.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.325-338
• /
• 2023

Korean fir (Abies koreana Wilson) is one of the most important environmental indicator tree species for assessing climate change impacts on coniferous forests in the Korean Peninsula. However, due to the nature of alpine and subalpine regions, it is difficult to conduct regular field surveys of Korean fir, which is mainly distributed in regions with altitudes greater than 1,000 m. Therefore, this study analyzed the vegetation change trend of Korean fir using regularly observed remote sensing data. Specifically, normalized difference vegetation index (NDVI) from Moderate Resolution Imaging Spectroradiometer (MODIS), land surface temperature (LST), and precipitation data from Global Precipitation Measurement (GPM) Integrated Multi-satellitE Retrievalsfor GPM from September 2003 to 2020 for Hallasan and Jirisan were used to analyze vegetation changes and their association with environmental variables. We identified a decrease in NDVI in 2020 compared to 2003 for both sites. Based on the NDVI difference maps, areas for healthy vegetation and high mortality of Korean fir were selected. Long-term NDVI time-series analysis demonstrated that both Hallasan and Jirisan had a decrease in NDVI at the high mortality areas (Hallasan: -0.46, Jirisan: -0.43). Furthermore, when analyzing the long-term fluctuations of Korean fir vegetation through the Hodrick-Prescott filter-applied NDVI, LST, and precipitation, the NDVI difference between the Korean fir healthy vegetation and high mortality sitesincreased with the increasing LST and decreasing precipitation in Hallasan. Thissuggests that the increase in LST and the decrease in precipitation contribute to the decline of Korean fir in Hallasan. In contrast, Jirisan confirmed a long-term trend of declining NDVI in the areas of Korean fir mortality but did not find a significant correlation between the changes in NDVI and environmental variables (LST and precipitation). Further analyses of environmental factors, such as soil moisture, insolation, and wind that have been identified to be related to Korean fir habitats in previous studies should be conducted. This study demonstrated the feasibility of using satellite data for long-term monitoring of Korean fir ecosystems and investigating their changes in conjunction with environmental conditions. Thisstudy provided the potential forsatellite-based monitoring to improve our understanding of the ecology of Korean fir.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.135-145
• /
• 2023

Aggregate is used to produce stable materials like concrete and asphalt and is fundamental to meet the social needs of housing, industry, road, energy and health. A total of 42.35 billion tons of aggregate were produced in 2021 worldwide, an increase of 0.91% compared to the previous year. Among them, 2 billion tons were produced in China, India, European Union and United States, making up to 71.75% of the share. South Korea has witnessed a constant increase in aggregate production, overtaking Mexico and Japan for seventh place with 390 million tons and 0.85% of the share. The industrial sand and gravel produced globally amounted to 352.66 million tons. The top seven countries with the highest production were China, United States, Netherlands, Italy, India, Turkey and France, and their production exceeded 10 million tons and held a share of 74.69%. Exports of natural rock recorded $21.68 billion in 2021, increased by $2.3 billion compared to the previous year, while exports of artificial rock increased by $2.66 billion to $13.59 billion. Exports of sand reached $1.71 billion with United States, Netherlands, Germany and Belgium being the four countries with the highest exports of sand. The four countries exported more than $100 million in sand and took up 57.70% of the total amount. Exports of gravel totaled $2.75 billion, with China, Norway, Germany, Belgium, France and Austria in the lead, making up to 48.30% of the total share. The aggregate quarry started to surge in the 1950s due to the change in people's lifestyle such as population growth, urbanization and infrastructure delvelopment. Demand for aggregate is also skyrocketing to prevent land reclamation and flood caused by sea-level rise. Demand for aggregate, which was around 24 gigatons in 2011, is expected to double to 55 gigatons in 2060. However, it is likely that aggregate extraction will heavily damage the ecosystem and the world will eventually face a shortage of aggregate followed by tense social conflict.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.311-330
• /
• 2023

Development of Carbon Capture and Storage (CCS) technique is becoming increasingly important as a method to mitigate the strengthening effects of global warming, generated from the unprecedented increase in released anthropogenic CO₂. In the recent years, the characteristics of basaltic rocks (i.e., large volume, high reactivity and surplus of cation components) have been recognized to be potentially favorable in facilitation of CCS; based on this, research on utilization of basaltic formations for underground CO₂ storage is currently ongoing in various fields. This study investigated the feasibility of underground storage of CO₂ in basalt, based on the examination of the CO₂ storage mechanisms in subsurface, assessment of basalt characteristics, and review of the global research on basaltic CO₂ storage. The global research examined were classified into experimental/modeling/field demonstration, based on the methods utilized. Experimental conditions used in research demonstrated temperatures ranging from 20 to 250 ℃, pressure ranging from 0.1 to 30 MPa, and the rock-fluid reaction time ranging from several hours to four years. Modeling research on basalt involved construction of models similar to the potential storage sites, with examination of changes in fluid dynamics and geochemical factors before and after CO₂-fluid injection. The investigation demonstrated that basalt has large potential for CO₂ storage, along with capacity for rapid mineralization reactions; these factors lessens the environmental constraints (i.e., temperature, pressure, and geological structures) generally required for CO₂ storage. The success of major field demonstration projects, the CarbFix project and the Wallula project, indicate that basalt is promising geological formation to facilitate CCS. However, usage of basalt as storage formation requires additional conditions which must be carefully considered - mineralization mechanism can vary significantly depending on factors such as the basalt composition and injection zone properties: for instance, precipitation of carbonate and silicate minerals can reduce the injectivity into the formation. In addition, there is a risk of polluting the subsurface environment due to the combination of pressure increase and induced rock-CO₂-fluid reactions upon injection. As dissolution of CO₂ into fluids is required prior to injection, monitoring techniques different from conventional methods are needed. Hence, in order to facilitate efficient and stable underground storage of CO₂ in basalt, it is necessary to select a suitable storage formation, accumulate various database of the field, and conduct systematic research utilizing experiments/modeling/field studies to develop comprehensive understanding of the potential storage site.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.24-36
• /
• 2022

The Bonghwang-dong ruins in Gimhae, the central area of Geumgwan Gaya, is presumed to be the site of the royal palace, and excavations have been in progress at the Gaya National Cultural Heritage Research Institute. According to a research conducted by lowering the level to the base layer on the north side of the site, mostly shell layers composed of oysters were confirmed, and soil composed of different material was alternately filled in to form a site construction. In other words, it can be seen that there was work at the site of the Bonghwang-dong ruins that required large-scale labor, such as building ramparts and embankments. There is stratigraphic confusion such as showing different age values in the same shell layer through a chronological analysis of organic matter and charcoal in the sedimentary layer, and deriving a result value in the upper layer ahead of the lower layer. In addition, open-sea diatoms are observed not only in the sedimentary layers, but also the pits. Therefore, it is judged that the soil constituting the ruins was brought from the outside. The Bonghwang-dong ruins are located inside the commonly called Bonghwang earthen ramparts, where many excavation organizations conducted research within the estimated range of the earthen fortifications. As a result, it was found that it was similar to the sedimentary layers of the ruins of the Three Kingdoms Period, which were investigated along with the ruins of Bonghwang-dong. Through this, the surrounding ruins, including those of Bonghwang-dong, were located close to paleo-Gimhae Bay, so it is believed that the soil brought from the surroundings was used to reinforce the ground. As a result of the excavation research on the Bonghwang-dong ruins conducted so far, it was found by sedimentary layer analysis and soil experiments that the ruins were created on stable land. Relics excavated in the sediments of the ruins and carbon dating data show that Bonghwang-dong carried out large-scale civil construction work in the 4th century to build the site, which clearly shows the status of Geumgwan Gaya.