• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.135-141
• /
• 2020

This paper summarizes the data of a monopole antenna with a sleeve structure that can be applied in various ways. Sleeve monopole antennas have broadband characteristics and are used for multi-frequency applications. The sleeve monopole antenna is composed of a vertical conductor, which is a radiator, and a sleeve having the same structure as a coaxial cable. The sleeve acts as a radiator and an open stub. The length of the sleeve should be 1/3~2/3 of the total length of the antenna. A monopole antenna having a sleeve structure is applicable to a vehicle wiper antenna. In addition, the case of applying this antenna to a broadband sleeve antenna using a loading coil, a broadband printed sleeve monopole antenna for an ISM band, a gap sleeve and a double sleeve, and a UWB planar monopole antenna using half cutting was summarized and analyzed in terms of structure and broadband.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.245-250
• /
• 2014

This paper presents the broadband printed sleeve-monopole antenna implementing the sleeve monopole structure in the form of PCB. In the proposed antenna, the antenna performance was improved by the diameter variation of the radiator, the length variation of the sleeve, and the variation of the diameter of the sleeve conductor. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.12GHz~3.18GHz. The frequency bandwidth is 1.08GHz. The frequency range of the actual fabricated antenna was 2.0GHz~3.55GHz, the frequency bandwidth is 1.55GHz. The maximum gain was 1.64dBi. The proposed antenna was $56{\times}5{\times}1.6mm$ in size. The utilization possibility of the broadband printed sleeve-monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

• The Research Journal of the Costume Culture
• /
• v.23 no.4
• /
• pp.595-603
• /
• 2015

The influence of Japonism, which is the post-mid-$19^{th}$ century phenomenon of appreciating and preferring the Japanese style that manifested all across Western art, started to grow as a result of the active open-door policy of Japan at this time. As all areas of Japanese arts and culture, such as paintings, sculptures and theater plays, influenced Europe and America, this influence developed into a cultural phenomenon that was reflected even in fashion. The characteristic elements of the kimono first expanded from Paris and showed a similar silhouette to that of the traditional kimono in the early $20^{th}$ century, but towards the middle and the end of the century, kimono sleeves that were connected as one piece without a connecting seam line between the sleeve and bodice started to appear. The foundation of this research focuses on the design characteristics of kimono sleeves that can be seen in $20^{th}$-century fashion, and five varying kimono sleeve jackets and coats based on these formative characteristics were designed. Each design had a gusset design added, which improved the external and mobility problems inherent in kimono sleeve patterns, while at the same time serving as a proposal for new design element applications. Additionally, through various changes to and attempts at designs using the kimono sleeve as a limiting factor, new design possibilities were explored.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.145-150
• /
• 2016

In this paper, we proposes a DTV indoor receiving antenna with a gap sleeve monopole structure. The proposed antenna uses a basic structure of a sleeve monopole and gap sleeve. To optimize antenna, we have adjusted the gap between monopole and sleeve, the gap between sleeve and ground. In order to confirm the property of antenna parameters, it was used a commercial software, HFSS. For the antenna fabrication, a FR4 dielectric substrate which has a dielectric constant of 4.7 was used. The size of the antenna was $213mm{\times}40mm{\times}1.6mm$. Frequency band of the fabricated antenna was 432MHz ~ 827MHz, and the bandwidth was 395MHz. The maximum gain of the antenna was 2.19dBi. Consequently, it was confirmed the possibility of practical application of the DTV indoor receiving antenna with a gap sleeve monopole structure.

• The Research Journal of the Costume Culture
• /
• v.25 no.2
• /
• pp.224-236
• /
• 2017

Kimono sleeves have continuously appeared in modern fashion as a design motif and this trend has become increasingly prevalent recently. However for research in the area of clothing composition for kimono sleeves in Korea, there has been a lack of development of master patterns based on basic data from the analysis of the standard body type of Korean people and finalized designs based on comparative experiments and analysis of pre-existing research Thus, there is no ideal master kimono sleeve pattern development research based on the examination of the results of the analysis of the standard body type of Korean people. Therefore by recognizing the importance of developing a master kimono sleeve pattern, this research aims to present a practical master kimono sleeve pattern for the standard body type of someone in their 30s. First, the four master patterns were collected and a dressing evaluation was conducted, and by selecting and improving one of these master designs, a final research master pattern was developed after a second dressing evaluation. Through this research, it was possible to design a master kimono sleeve pattern appropriate both externally and functionally for the standard body type of someone in their 30s, which has not been a consideration in previous research.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.742-754
• /
• 2013

This study aims to conduct a investigation on the gusset of a Kimono sleeve to achieve excellent movability through an evaluation of its fit wearing by conducting comparative research in terms of the length of the gusset pattern according to sleeve angle, which having a great effect on the wearing and activity of the top of a Kimono sleeve. A prototype was manufactured by developing the basic Kimono sleeve based on the method of Ernestine Kopp's basic bodice pattern. The sleeve angles which was applied to the prototype pattern of the Kimono sleeve ware approximately $50^{\circ}$, $70^{\circ}$ and the gusset was diamond-shaped which has a width of 10cm and lengths of 9cm, 10cm and 11cm. As a result, in the case of $55^{\circ}$ of the sleeve angle, the angle was gradually increased as the length of gusset was extended, although, in the case of $68^{\circ}$ of the sleeve angle, there was not remarkable effects between increased gusset length and the value of the angle. This result could be analyzed that the gusset did not affect remarkably since the sufficient movability was gained with only the angle in the case of $68^{\circ}$. Also, in the results of experiment on $55^{\circ}$ angle, as 9cm, 10cm and 11cm of length of gusset commonly indicated over $70^{\circ}$ in average, it was found that the movability was obtained sufficiently in every part.