• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.159-159
• /
• 2011

수자원 공급의 시 공간적 편차가 큰 우리나라에서는 수자원을 이용하기 위해서 다수의 댐을 건설하고 있다. 특히, 생활수준의 향상으로 용수 수요가 급증하였기 때문에 용수가 부족한 곳에는 광역상수도 사업 등을 통하여 용수를 공급하고 있다. 댐에서 용수가 공급되기까지의 과정은 일종의 관수로 흐름으로 생각할 수 있다. 관수로 내를 흐르는 유체가 갑자기 정지하게 되면, 유체 운동 에너지의 변화가 유발되고, 그로 인해 관내에 급격한 압력의 상승이 일어나게 된다. 반대로 정지하고 있던 유체가 빠른 속도로 흐르게 되면 압력 감소가 급격하게 발생한다. 이와 같이 유체 운동 상태의 급변에 의한 압력변화와 그에 따른 압력파가 음속의 속도로 상 하류로 전파되는 현상을 수격작용(waterhammer)이라 한다. 통상적으로 수격작용은 밸브 개폐 정도가 갑자기 바뀔 때, 펌프의 급격한 기동이나 정지 시, 터빈 내 전력소요가 갑자기 바뀔 때, 댐 수위의 갑작스런 변화, 펌프 임펠러의 진동, 물 수요의 급격한 변화 등에 의해 발생하며, 수격작용은 유체의 질량과 운동량 때문에 관 벽에 큰 힘을 가하게 되어 정상적인 동수압 보다 몇 배나 큰 압력을 발생시킴으로 관 자체는 물론 펌프, 밸브, 터빈 등 관 시설물을 파손시키거나 진동, 소음 등을 야기시킴으로 대규모 건물, 공장, 발전소 등을 설계할 경우 그에 대한 적절한 대책을 강구하여야 한다. 특히 댐에 연결된 저수지 또는 조정지로부터의 도수로가 압력수로이며 그 길이가 상당히 크면 수차가 급정지했을 경우 수격작용에 의해서 압력터널 내에 과도한 압력상승이 일어난다. 이 압력상승을 방지함과 함께 발전소 부하의 증감에 따라서 수량을 공급하거나, 흡수할 목적으로 압력도수로와 수압관과의 접합부에 자유수면이 있는 수조를 설치한다. 이것을 조압수조(surge tank)라 한다(최영박, 1979). 조압수조에서 부하의 급속한 차단에 의해서 수차로 유입될 수량이 차단되면 도수로 내로 흘러 들어온 물은 관성 때문에 수조 내의 수위를 상승시키고, 수조 수위가 어느 정도 이상으로 되어 저수지 수위 보다 상승하면 수조로의 유입이 정지하고 반대로 수조에서 저수지로 역류하여 수조수위는 하강한다. 즉, 조압수조는 도수로 내에 발생한 과도한 압력을 수조 내 수면의 승강운동을 이용하여 감소시키고 원래의 안정적인 수위로 회복시킨다. 본 연구에서는 수격작용에 대한 댐 안정성을 확보하는 수단 중의 하나인 조압수조에 대해 살펴보았다. 연구대상으로 용담댐을 선정하였다. 용담댐에 대한 기존의 검토결과 수직 갱의 지름이 5m 이상이면 조압수조의 동적안정조건을 만족 시키는 것으로 조사되었다. 댐의 설계홍수위인 EL. 265.5m를 기준으로 조압수조의 안정성을 감소시키지 않는 범위 내에서 조압수조 내 격벽 설치 유 무에 따른 수조의 최적 크기를 산정하였다. 산정결과를 분석한 결과 동일 조건에서 격벽을 설치한 경우가 격벽을 설치하지 않은 경우에 비해서 조압수조의 면적이 약 21% 감소하는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.106-116
• /
• 2018

Recently, the role of the contact center for business-to-consumer (B2C) operations is becoming more and more important as the customer contact point. In particular, an Internet Protocol (IP)-based contact center system is made up of a complicated information system in order to accommodate various customer channels, in addition to the telephone, and to respond in real time. However, until now, evaluations of contact centers have focused on customer service-based research from inbound contact centers. We used the contact center as a measure of performance, focusing on indicators that have traditionally influenced customer satisfaction, such as response rates and service levels. There is insufficient research on the characteristics of the services that a contact center should have and on the evaluation models for information systems. The role of information systems is becoming important as the latest contact center, which has moved from the TDM-driven digital phone system center to the IP-based contact center, accommodates a variety of digital channels other than voice phones. In particular, as offline branches decrease due to the development of the Internet and mobile phones, non-facing responses to customers are important, so the contact center has influenced the enterprise. Therefore, we developed an evaluation model not only in terms of customer service, but also from information system and business aspects, using the AHP and verifying the evaluation model through empirical cases. In particular, content analysis was used to ensure objectivity of AHP evaluation items.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.687-693
• /
• 2016

The rapid turning and acceleration movement of a rotorcraft leads to a sloshing phenomenon in the fuel tank. Sloshing caused by rapid movement can affect the internal components by creating an excessive load. In severe situations, the resulting damage to the internal components and pipes can also lead to the tearing of the fuel tank itself. Therefore, to improve the survivability of the crew, the internal components of the fuel tank must be designed to retain their structural soundness during the sloshing phenomenon. In order to accomplish this, the sloshing load acting on the components first needs to be determined. This paper investigates the sloshing load applied to the internal components by performing numerical analysis for rotary-wing aircraft fuel tanks in the sloshing test. Fluid-Structural Interaction (FSI) analysis based on smoothed particle hydrodynamics (SPH) is conducted and the conditions specified in the US military standard (MIL-DTL-27422D) are employed for the numerical simulation. Based on this numerical simulation, by analyzing the load applied to the internal components of the fuel tank due to the sloshing phenomenon, the possibility of obtaining the design data by numerical analysis is examined.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.183-183
• /
• 2011

전 국토의 65%가 산악지형으로 이루어져 있는 우리나라는 도로개설 및 산업기지 건설, 대규모 주택단지 개발 등으로 자연사면을 변형시키는 규모나 빈도가 증가하고 있고, 최근에는 기상이변에 의한 집중호우가 빈번히 발생하여 절토사면에서 낙석이 발생할 위험이 점점 높아지고 있는 실정이다. 낙석방지를 위한 대책공법으로는 낙석방지 망, 낙석방지 울타리 등이 있으며 이중에서 낙석방지 울타리는 국내의 국도 낙석방지 대책공법 중 70% 이상을 차지하고 있다. 그러나 국내 설계지침에는 낙석방지 울타리에 대한 다양한 성능등급과 성능평가를 위한 표준화된 시험방법이 제시되어 있지 않아 현장여건을 고려하여 적절한 낙석방지 울타리를 선정하고 낙석방지 울타리들의 성능을 비교검토하기에 어려움이 있다. 유럽의 경우 유럽연합 출범이후 낙석방지 시설에 대한 통합기준의 필요성이 대두되어 유럽 여러 나라의 성능평가 방법과 스위스의 설계지침을 고려하여 2008년에 유럽 통합 지침인 ETAG 27을 제정하였다. ETAG 27에는 낙석방지 울타리의 성능등급이 100kJ~4,500kJ이상 9등급으로 분류되어 있고 성능등급 별로 Service Energy Level과 Maximum Energy Level에 대하여 실물시험을 통한 성능평가 시험과 구성요소에 대한 검증시험을 수행하도록 되어있다. 실물시험은 낙석에너지의 산정과 낙석질량의 타격위치를 정확하게 결정할 수 있는 방법을 이용하여 수행토록 규정되어 있다. 미국의 경우에는 주별로 상이한 설계기준으로 인하여 발생하는 문제를 해소하기 위하여 2003년에 스위스의 설계지침을 준용하여 통합기준인 NCHRP Report 20-07을 결정하였다. NCHRP Report 20-07에는 낙석방지 울타리의 성능등급이 100kJ~5,000kJ까지 9등급으로 분류되어 있고 성능등급 별 낙석질량이 규정되어 있으며 등급별 낙석에너지의 50%와 100%에 대하여 실물시험을 통한 성능평가 시험을 수행하도록 되어 있다. 실물시험은 낙석에너지의 산정과 낙석질량의 타격위치를 정확하게 결정할 수 있는 방법을 이용하여 수행토록 규정되어 있다. 낙석방지 울타리에 대한 국내 설계지침과 유럽과 미국의 설계지침을 비교분석하고 국내에서 수행된 실물실험을 통한 성능평가 연구결과를 검토하였다. 또한 구성요소의 역학적 특성변화가 전체 시스템의 성능에 미치는 영향을 조사하기 위해서 국내 설계 지침에 제시된 낙석방지 울타리에 대하여 컴퓨터 시뮬레이션을 이용한 성능평가를 수행하였다. 이러한 연구결과에 근거하여 국내 설계지침은 현장여건에 따라 적절한 낙석방지 울타리를 선정할 수 있도록 다양한 성능등급을 규정하고, 낙석방지 울타리의 성능을 합리적으로 비교검토 할 수 있게 하는 표준화 성능평가 시험방법과 평가기준을 정립하며, 구성요소의 품질에 대한 신뢰성을 확인하는 구성요소의 검증시험을 포함하는 방향으로 개선될 필요가 있는 것으로 조사되었다.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2016

This study was conducted to find out the influence of red LED (Light Emitting Diode) lighting on the photosynthesis, vegetative growth and fruit quality of 'Fuji'/M.26 adult apple tree during night after sunset. The photosynthetic rate, stomatal conductance and transpiration rate at daytime of red LED treatments was not different to those of the control. However, the stomatal conductance and transpiration rate at the nighttime of red LED treatments were lower than those of the control, and the red LED lighting during night after sunset was not induce to photosynthesize at nighttime. In the leaf characteristics, the red LED lighting seemed to increase leaf area and C/N ratio, but decrease SPAD value. The bourse shoot length of the red LED treatments was shorter than that of the control. In the fruit quality, the red LED lighting seemed to increase ethylene production, respiration rate, soluble solid content and fruit red color, and especially the fruit red color tend to increase as the red LED lighting time was longer. In conclusion, the red LED lighting during night after sunset of 'Fuji'/M.26 apple tree promoted the fruit maturation.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.397-405
• /
• 2012

Installation of deck has been on the rise in Korea recently, but there is little of research on the safety of deck. One of the major factors affecting maneuverability of a pedestrian is frictional force between an outsole of shoe and a surface of the deck. The frictional force is influenced by many factors such as raw material variance of deck, surface convex shape of deck, outsole patterns of shoes, and moist condition of contact surface between deck and shoes. This study focused on evaluating the effect of these factors on the frictional force. Two kinds of deck, which were made of natural wood and wood plastic composite, were used in this study. The surface convex patterns of deck were classified to single nonslip (longitudinal groove processing) and double nonslip (longitudinal and transverse groove processing). Two kinds of shoe outsole patterns, W-shape and rectangle-shape, were used in the tests. Also, the friction tests were carried out at dried surface conditions and water-adsorbed surface condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.444-455
• /
• 2019

The purpose of this research was to analyze technological trends of 「Military Small Giant Venture Tech-Fi Net」 from Defense Technology Information Service via social network analysis. 「Military Small Giant Venture Tech-Fi Net」, which was constituted for their fine technology for application to the military field, registered 847 technologies of 388 companies. In this research, we analyzed 847 technologies for the relations between "Military System" and "Military Technology Category" via centrality measurement, one of the social network analysis methods. The results indicate that the major technologies of domestic military small giant venture companies were "Sensor" and "ICT" for "C4I System" and "Surveillance and Reconnaissance System" and "Platform/Structure" for "Land System", "Aeronautical System" and "Naval Sea System". In contrast, we recognized inadequate technologies, such as "Propellant" and "Material" for "Missile and Ammunition system" and "Sensor" and "ICT" for "Defense System", We hope that our results and method will be conducive to the technological development of Small Giant Venture companies.

• Journal of Veterinary Clinics
• /
• v.22 no.1
• /
• pp.56-59
• /
• 2005

An about 5-month-old, female rabbit was presented with pruritus, alopecia and mucopurulent ocular discharge. On physical examination mild to moderate scales on whole body were observed. Dermatological lesions such as alopecia, erythema, papules, pustules and crusts were observed in the eyelids, nose, inner pinna, medial sites of four feet, metacarpal and metatarsal areas, and cranial site of left stifle joint. Also, mild conjunctivitis, blepharitis and keratitis were found. For extensive dermatologic diagnostic evaluation skin scraping, tape stripping, impression smear, combing, wood' light, bacterial culture and fungal culture were performed. Finally, Cheyletiella spp. was found by combing. Many heterophils and eosinophills were appeared in impression smear. The result of fungal culture was negative. Pasteurella spp was cultured. Definitive diagnosis of Cheyletiellosis and secondary Pasteurella spp infection were established. The rabbit was treated with 6 mg/kg of selamectin topically every two weeks and restricted in cage for one month. During one month of initial treatment, clinical signs such as pruritus, alopecia, scales, papules, pustules and crusts were remarkably improved. However, in spite of good therapeutic response of selamectin the rabbit was dead suddenly at 22 days after second administration of selamectin. This case showed that selamectin was possibly effective for cheyletiellosis in rabbit; safety of selamectin for rabbit was not identified.

• Journal of Veterinary Clinics
• /
• v.26 no.2
• /
• pp.176-180
• /
• 2009

Two year-old female miniature schnauzer was presented with depression, abdominal pain and inappetence. Physical examination revealed tachypnea, fever, and abdominal pain. Leukocytosis with neutrophilia was shown in complete blood count. Radiograph revealed the increase of opacity in parallel to vertebra and dislocation of descending colon. Calculi and sludge in bladder, hydronephrosis and dilation of proximal ureter in right kidney were observed in ultrasonographic examination; also, irregular shape of structure in retroperitoneal cavity was observed. Urinalysis showed protein urine and hemtauria. Many epithelial cells, spindle cells, calcium oxalate dihydrate crystals, struvite crystals, amorphous crystals and granular casts, WBC, cocci were examined in urine sediment test. ERD-kit test result was highly positive. Based on those test and excretory urogram pyelonephritis and complete unilateral obstruction of ureter were confirmed. A balloon type structure in retroperitoneal cavity was found through the exploratory laparotomy. In cytologic examination of aspirated fluid from dilated area many degenerated neutrophils and phagocytized cocci were observed. Staphylococcus intermedius was cultured from aspirated fluid. Based on these clinical results retroperitoneal abscesses caused by Staphylococcus intermedius was diagnosed with ureter obstruction and concurrent cystic calculi. Nephrectomy of right kidney with ureter was performed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.23-30
• /
• 2009

Crash cushions are protective devices that prevent errant vehicles from impacting on fixed objects. This function is accomplished by gradually decelerating a vehicle to a safe stop in a relatively short distance. Commonly used crash cushions generally employ one of two concepts to accomplish this function. The first concept involves the absorption of the kinetic energy of a moving vehicle by crushable or plastically deformable materials and the other one involves the transfer of the momentum of a moving vehicle to an expendable mass of material located in the vehicle's path. Crash cushions using the first concept are generally referred to as compression crash cushions and crash cushions using the other concept are generally referred to as inertial crash cushion. The objective of this research is the development of a compression-type crash cushion by employing the two concepts simultaneously. To minimize the number of full-scale crash tests for the development of the crash cushion, preliminary design guide considering inertial and frictional energy absorption was constructed and computer simulation was performed. LS-DYNA program, which is most widely used to analyze roadside safety features, was used for the computer simulation. The developed crash cushion satisfied the safety evaluation criteria for various impact conditions of CC2 performance level in the Korean design guide.