• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.1033-1039
• /
• 2006

The purpose of this study are to evaluated bond, flexural properties and control of plastic shrinkage cracking of crimped type synthetic fiber with amplitude 6 mm and height 1.8 mm reinforced cement based composites. Bond and flexural test were conducted in accordance with the JCI-SF 8 and JCI SF-4 standard, respectively. The plastic shrinkage cracking test was conducted for evaluating the effect of fiber in reducing shrinkage cracking in cement based composites. Test results indicated that the crimped typel synthetic fibers performed significantly better than the straight type fiber in terms of interface toughness and pullout load and the crimped type synthetic fibers improved the flexural toughness of concrete. Also, the increasing the crimped type synthetic fiber volume fraction from 0.00% to 1.00% improved the plastic shrinkage cracking resistance. Specially, the effect of control of plastic shrinkage cracking is excellent at the more than 0.5% fibre volume fraction.

• Journal of the korean veterinary medical association
• /
• v.42 no.10
• /
• pp.943-948
• /
• 2006

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2000.03a
• /
• pp.28-28
• /
• 2000

• The monthly packaging world
• /
• s.277
• /
• pp.113-115
• /
• 2016

• 어항어장
• /
• s.2
• /
• pp.16-23
• /
• 1988

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.341-350
• /
• 1998

Background: Airway hyperreponsiveness is a cardinal feature of asthma. It consists of both an increased sensitivity of the airways, as indicated by a smaller concentration of a constrictor agonist needed to initiate the brochoconstrictor response and an increased reactivity, increments in response induced subsequent doses of constrictor, as manifested by slopes of the dose-response curve. The purpose of this study is to observe the relationship between bronchial sensitivity and reactivity in asthmatic subjects. Method: Inhalation dose-response curves using methacholine were plotted in 56 asthmatic subjects. They were divided into three groups(mild, moderate and severe) according to clinical severity of bronchial asthma. PC20 were determined from the dose-response curve as the provocative concentration of the agonist causing a 20% fall in FEVl. PC40 were presumed or determined from the dose response curve, using the PC20 and the one more dose after PC20. Reactivity was calculated from the dose-response curve regression line, connecting PC20 with PC40. Results: PC20 were 1.83mg/ml in mild group, 0.96mg/ml in moderate, and 0.34mg/ml in severe. PC40 were 7.l7mg/ml in mild group, 2.34mg/ml in moderate, and 0.75mg/ml in severe. Reactivity were $24.7{\pm}17.06$ in mild group, $46.1{\pm}22.l0$ in moderate, and $59.0{\pm}5.82$ in severe. There was significant negative correlation between PC20 and reactivity (r= -0.70, P<0.01). Conclusion: Accordingly, there was significant negative correlation between bronchial sensitivity and brochial reactivity in asthmatic subjects. However, in some cases, there were wide variations in terms of the reactivity among the subjects who have similar sensitivity. So both should be assessed when the bronchial response tor bronchoconstrictor agonists is measured.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.13-19
• /
• 2006

This paper reports the test results for shrinkage properties of low shrinkage high performance concrete developed by the authors depending on specimen size and constraint of reinforcing bar. As properties in fresh concrete low shrinkage high performance concrete(LSHPC) combined with expansive additives and shrinkage reducing admixture resulted in increase SP dosage due to loss of fluidity compared with that of control mixture concrete, while the dosage of AE agent was decreased. LSHPC exhibited higher compressive and tensile strength than control mixture concrete. For the effect of specimen size, an increase in specimen size led to a reduction of drying shrinkage. However, it was found that the autogenous shrinkage was not affected by the specimen size and measuring method. For constraint condition, an increase in the ratio of reinforcing bar caused the slight reduction in the strain of reinforcing bar, while it increased the autogenous shrinkage stress. It was seen that LSHPC was effective to reduce autogenous shrinkage by as much as 70% compared with control mixture high performance concrete.

• Applied Biological Chemistry
• /
• v.28 no.3
• /
• pp.167-173
• /
• 1985

Hot air drying characteristics of six year old cooked ginseng root at temperature ranges of $55{\sim}75^{\circ}C$ under 1.8m/sec air velocity and shrinkages accompained were investigated. Drying time to reach equilibrium moisture content of the root takes from 20 to 30 hours, depending on the subjected drying temperatures and root sizes. Drying curve shows that it has two or three falling stages and drying constant are continuously changed. Higher drying constant was observed both at early and late stages of drying. Shrinkage ratio of length, diameters, surface area and volume of the root were 13.0, 39.8, 47.7 and 68.5%, respectively, after 40 hours dry at $55^{\circ}C$. The most of shrinkage was observed at early drying stage.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.100-103
• /
• 2004

A systematic method for tunable dispersion compensation based on chirped fiber Bragg gratings without a center wavelength shift is proposed. The specially designed mechanical rotator can flexibly control the chirping ratio along the fiber grating and the corresponding dispersion value. The group delay can be linearly controllable since the proposed method can induce a linear strain gradient with the rotation angle change. The dispersion value could be controlled from 228.04 ㎰/nm to 1430.7 ㎰/nm with small center wavelength shift, which was less than 0.03 nm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.753-764
• /
• 1992

The steam generator water level is difficult to control at low power due to its reversed responses to the feedwater flow, which are well known as the shrink and swell phenomena. With regard to this problem a new control scheme has been studied by which the level transients could be kept within permissible ranges at low power. The relations between the various input conditions to steam generator and the level transients have been examined to be expressed in the form of process transfer functions. Analog filters have been incorporated to be expressed in the process with proper control constants. This control scheme allows the prediction of level variation together with the corresponding feedwater rate and results in mider transients with good stabilites.