• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.729-735
• /
• 2008

For well-constructed concrete, its service life is a long period and it has an enough durability performance. For cracked concrete, however, it is clear that cracks should be a preferential channel for the penetration of aggressive substance such as chloride ions accoding to author's previous researches. Even though crack width can be reduced due to the high reinforcement ratio, the question is to which extend these cracks may jeopardize the durability of cracked concrete. If the size of crack is small, surface treatment system can be considered as one of the best options to extend the service life of concrete structures exposed to marine environment simply in terms of cost effectiveness versus durability performance. Thus, it should be decided to undertake an experimental study to deal with the effect of different types of surface treatment system, which are expected to seal the concrete and the cracks to chloride-induced corrosion in particular. In this study, it is examined the effect of surfaced treated systems such as penetrant, coating, and their combination on chloride penetration through microcracks. Experimental results showed that penetrant can't cure cracks. However, coating and combined treatment can prohibit chloride penetration through cracks upto 0.06 mm, 0.08 mm, respectively.

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.101-117
• /
• 2023

Active debris removal, a technology that approaches and removes space debris in orbit, and the on-orbit service, a technology for extending the mission life of satellites by fuel charging or by exchanging the battery, are gaining interest with the growth of the space community. SaTReC plans to develop a satellite capable of capturing and removing Korean satellites orbiting in space after the end of their missions. In contrast to the previously launched satellites by Korea, which were mainly intended to observe Earth and the space environment, rendezvous/docking technologies, as required in the future during, for instance, space exploration missions, will be implemented and demonstrated. In this paper, an orbital transition method for next-generation small satellites that will capture and remove space debris will be introduced. It is assumed that a small satellite with a mass of approximately 200 kg will be injected into the mission orbit through Korea Space Launch Vehicle-II in 2027. Because the satellite must access the target using a minimum amount of fuel, an approaching technology using Earth's J2 perturbation force has been developed. This method is expected to enable space debris removal missions for relatively lightweight satellites and to serve as the basis for carrying out a new type of space exploration in what is termed the 'Newspace' era.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.689-693
• /
• 2023

Domestic bridges with a service life of more than 30 years are expected to account for approximately 54% of all bridges within the next 10 years. As bridges rapidly deteriorate, it is necessary to establish an appropriate maintenance plan. Recent domestic and international research have focused on the integration of BIM to digitize bridge maintenance information and then enhance accessibility and usability of the information. Accordingly, this study developed a BIM-FEM interoperability algorithm for bridge decks to convert maintenance information into data and efficiently manage the history of maintenance. After creating an initial crack BIM based on an exterior damage map, bridge specification and damage information were linked to a numerical analysis that performs damage analysis considering damage scenarios and design loads. The spread of cracks obtained from the analysis results were updated into the BIM. Based on the damage spread information on the BIM, an automated technology was also developed to assess both the current and future condition ratings of the bridge deck. This approach can enable an efficient maintenance of the deck using the history data from bridge inspection and diagnosis as well as future information on cracks and defects. The expected early detection and prevention would ultimately improve the lifespan and safety of bridges.

• Korean Journal of Culture and Social Issue
• /
• v.8 no.1
• /
• pp.165-187
• /
• 2002

This study examines Korean representation of the biotechnology and psychological factors which can influence lay people's perception and attitude about biotechnology. Korean college students(N=433) and lay adults(N=90) whom had college education participated in the study. Participants of the study 1 were asked to list words which comes to mind when associate with the biotechnology in broad sense, and several specific applications in health, medicines, agriculture and research. Participants of the study 2 were asked to list possible benefits and costs of biotechnology and their specific applications. In study 3, Participants responded the questionnaires about perceptions and attitudes of biotechnology. Korean people associated the biotechnology with its costs or risks and benefits. Korean college students mainly got the informations of the biotechnology from TV, newspapers, or internet. They trusted the scientist group and NGO group on their judgements about the assessment of risk and benefit of the biotechnology. College students showed the positive attitude with the applications in medicines and negative attitude with the applications in agriculture and public using of individual's genetic information. The radicalism, sensitivity in behavioral activation system, and trust/cynicism were to be found as a significant influencing factor for interest/knowledge and behavioral intention in related with biotechnology. Finally, more extensive knowledge of biotechnology did not lead to greater acceptance of it.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.215-227
• /
• 2022

In the digital transformation paradigm, IT employee work as a key human resource to accept new technologies and to lead their organization to be settled them efficiently. However, due to relatively short term of their job life and high turnover rate, the companies and the organizations are still experiencing problem the lack of IT manpower or turnover. In this study, it attempted to analyze the relationship between IT employee's technostress factors such as techno-overload, techno-complexity, techno-uncertainty, techno-invasion, and techno-insecurity and job burnout through stress coping. To reveal the structural relationship between main variables, the survey was conducted on 318 IT employees. An EFA, CFA, and reliability analysis were performed to confirm reliability and validity, and the structural equation model was conducted to testify research hypotheses. The main results are as follows. First, it was found that techno-uncertainty and techno-insecurity had the significant positive effect on problem focused coping(PFC). And, techno-complexity, techno-uncertainty, and techno-insecurity were found to have a significant positive effect on emotion focused coping(EFC). Second, in the relationship between stress coping and job burnout, it was found that EFC had a significant positive effect on burnout. Third, in the relationship between technostress and burnout, techno-uncertainty and techno-invasion were found to have a significant positive effect on burnout. In addition, it was found that the mediator effect of stress coping between techno-overload and techno-complexity through EFC. Therefore, these outputs are expected to suggest how to motivate IT employees who work as key role in efficient management on IT assets and strengthen competitiveness in digital transformation paradigm.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.11-20
• /
• 2024

In the recent era of NewSpace, unlike high-reliability satellites of the past, low-reliability satellites are being developed and mass-produced at a lower cost to launch constellations satellites. To achieve cost-effective cluster satellite development, satellite users and developers need to assess the feasibility of maintaining mission performance over the expected lifespan when cluster satellites are launched. Plans for replacements due to random failures should also be established to maintain performance. This study proposed a method for assessing system reliability and availability to maintain mission performance and establish replacement strategies for Earth observation constellation satellites. In this study, a constellation reliability and availability model considering mission performance required for a satellite constellation, situations of satellite backup, and additional ground backups was established. The reliability model was structured based on the concept of a k-out-of-n system and the availability model used a Markov chain model. Based on the proposed reliability model, the minimum number of satellites required to meet mission requirements was defined and satellites needed in orbit during the required mission period to satisfy mission reliability were calculated. This research also analyzed the number of spare satellites in orbit and on the ground required to meet the desired availability during required service period through availability analysis.

• Journal of the Korean Institute of Gas
• /
• v.28 no.2
• /
• pp.93-104
• /
• 2024

Facility diagnosis is essential for the smooth operation and life extension of rotating equipment used in industrial sites. Compared to other diagnostic methods, vibration diagnosis can find most of the initial defects, such as unbalance, alignment failure, bearing defects and resonance, compared to other diagnostic methods. Therefore, vibration analysis is the most commonly used facility diagnosis method in industrial sites, and is usefully used as a predictive preservation (PdM) technology to manage the condition of the facility. However, since the vibration diagnosis method is performed based on experience based on the standard, it is carried out by experts. Therefore, it is intended to contribute to the reliability of the facility by establishing a system that anyone can easily judge defects by establishing a vibration diagnosis method performed based on experience as a knowledgeable code system. An algorithm was developed based on the ISO-20816 standard for vibration measurement, and the reliability was verified by comparing the results of vibration measurement at various demonstration sites such as petrochemical plant compressors, hydrogen charging stations, and industrial machinery with the results of analysis using a development system. The developed algorithm can contribute to predictive maintenance (PdM) technology that anyone can diagnose the condition of the rotating machine at industrial sites and identify defects early to replace parts at the exact time of replacement. Furthermore, it is expected that it will contribute to reducing maintenance costs and downtime due to the failure of rotating machines when applied to various industrial sites such as oil refining facilities, transportation, production facilities, and aviation facilities.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.73-80
• /
• 2009

Biofilters use porous solid media to support microorganisms and allow access to the contaminants in the airflow. The characteristics of media used in biofilters vary greatly, and therefore it is important to select the appropriate media in order to obtain a large enough surface attachment area and uniform pore. This study was performed to compare hydrogen sulfide ($H_2S$) removal efficiencies of three biofilter media; coconut fiber, ceramic, and polyurethane. The biofilter packed with coconut fiber showed stable removal activity when inlet loading was changeable, and was restored rapidly when the moisture content decreased. However, the coconut fiber suffered from low durability. To cope with this problem a media of fibrinous polypropylene was developed to strengthen the durability of the coconut fiber. Biofilter column experiments using the fibrinous polypropylene media demonstrated over 99% of removal efficiencies at pH as low as 3 and 6 seconds of EBRT (empty bed gas residence time). Due to its superior physical characteristics, it is expected that the $H_2S$ treatment performance will increase when the new fibrinous polypropylne media is applied in commercial biofilter systems.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.102-107
• /
• 2009

In clinical pediatric dentistry, we have many chances to encounter the white spot like incipient enamel lesions on the mesial surfaces of the 1st molars with direct vision, especially just after the 2nd primary molars were exfoliated. But it was thought highly desirable to assess if these lesions are properly and effectively managed yet. This study aims at surveying the prevalence of incipient lesions on the mesial surfaces of the 1st molars in children through direct observation and examining the suitability of adhesive sealing on them as a pilot trial in searching for their proper management. 1. Among the 124 mesial surfaces of the 1st molars examined, 34% were sound, 53% had incipient carious lesions and 13% had cavitated lesions. 2. In the sectional views of the specimens, 20% showed microleakage after thermo-cycling and it was thought not recommendable as a permanent method. Therefore in order to effectively fight against the incipient caries lesions in children‘s permanent teeth, it was thought proper not to rely on any one method, but to perform reinforcing oral hygiene and promotion of remineralization in combination with therapeutic sealing which is stronger in short-term sealing effect. Although therapeutic sealing has been considered as the core in minimally invasive concept to treat the white spot lesions, its long-term clinical trials have not been suggested. Continuous research is strongly required for making this approach to acquire permanent nature, especially in regards of proper pretreatment and high molecular materials deeply penetrable into enamel.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.255-264
• /
• 2019

In this study, we conducted the hot box tests to compare the changes in thermal insulation for the four types of multi-layer thermal screens by the used period after collecting them from the greenhouses in the field when they were replaced at the end of their usage. The main materials for these four types of multi-layer thermal screens were matt georgette, non-woven fabrics, polyethylene (PE) foam, chemical cotton, etc. These materials were differently combined for each multi-layer thermal screen. We built specimens ($70{\times}70cm$) for each of these multi-layer thermal screens and measured the temperature descending rate, heat transmission coefficient, and thermal resistance for each specimen through the hot box tests. With regard to the material combinations of multi-layer thermal screens, thermal insulation can be increased by applying a multi-layered PE foam. However, it is considered that the multi-layered PE foam significantly less contributes to heat-retaining than chemical wool that forms an air-insulating layer inside multi-layer thermal screens. For the suitable heat-retaining performance of multi-layer thermal screens, basically, materials with the function of forming an air-insulating layer such as chemical cotton should be contained in multi-layer thermal screens. The temperature descending rate, heat transmission coefficient, and thermal resistance of multi-layer thermal screens were appropriately measured through the hot box tests designed in this study. However, in this study, we took into consideration only the four kinds of multi-layer thermal screens due to difficulties in collecting used multi-layer thermal screens. This is the results obtained with relatively few examples and it is the limit of this study. In the future, more cases should be investigated and supplemented through related research.