• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.369-379
• /
• 2006

Objective: The purpose of this study was to find changes in the occlusal plane related to different vertical facial patterns and suggest treatment goals and conduct possible treatment mechanisms. Methods: 60 adult patients (28 males, 32 females) who had been diagnosed as Class 1 skeletal malocclusion and treated without extraction were selected. Patients were divided into three groups; short face type (group 1), average face type (group 2) and long face type (group 3), using the data on normal occlusion of Korean adults. Results: The results were achieved by analyzing cephalometric tracings of each group at pre-treatment, end-treatment and post-treatment (about 1 year recall check). The inclination of the occlusion plane tends to gradually increase as the face becomes longer In group 1, COP-X, FOP-X, L6/L1, MP-L6 were significantly decreased, and L1-FOP was significantly increased during the retention period (T3-T2). Group 2 showed no significant change, In group 3, FOP-X was significantly increased during the retention period (T3-T2). During the retention period, FOP-X showed significant change among each group, especially between group 1 and group 3. Conclusion: These results suggest that changes of occlusal plane inclination according to facial vertical pattern need to be considered during the retention period for intrusion, extrusion, and incisor overbite.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.127-136
• /
• 2018

The patient who has severely absorbed residual ridges, treatments are challenging to satisfy many factors: support, retention, stability, etc. The neutral zone or monoplane occlusion with non-anatomical tooth would be helpful to get additional retention and stability. The monoplane occlusion has been used long time because it can eliminate horizontal forces and many other advantages. The lingualized occlusion was introduced to improve chewing efficiency and esthetics. But from a stability aspect, it seems controversy between monoplane occlusion and lingualized occlusion. This case report shows the results of the treat two flat residual ridge patients using functional impression; piezography, and made 2 other dentures with monoplane and lingualized occlusion that patient can select denture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.4
• /
• pp.451-457
• /
• 2016

Prosthodontic decision-making process is done through analysis of clinical information and mutual communication between patient and dentist. When opposing teeth are extruded due to missing tooth or tooth defects, selection of appropriate treatment plan and predictory prognosis can be complicated in functional rehabilitation. In case of severely disharmonious occlusal plane result from extruded teeth, re-establishment of the occlusal plane is required, if necessary via prudent evaluation. In this case, class III patient had unesthetic appearance and mastication discomfort caused by disharmonious occlusal plane due to severe extrusion. Through a structured diagnostic process, appropriate treatment plan was selected. Esthetic and functional results were obtained through from full mouth rehabilitation with re-establishment of the occlusal plane.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.182-188
• /
• 2019

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.138-146
• /
• 2021

The diagnosis and treatment plan for forming ideal occlusal plane in full mouth rehabilitation are difficult because each process is complicated and information exchange between dentist and technician is subjective. The OP finder^® system simplifies this process and helps to deliver more objective and accurate information. In this case, full mouth rehabilitation was performed using OP finder^® system for patients with old bad fixed prosthesis and severely worn mandibular teeth, and reported that the result of proper occlusal plane setting and masticatory function recovery was obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.263-275
• /
• 2022

The loss of posterior occlusal support leads to further complications such as collapsed occlusal plane and reduced vertical dimension, and it may cause problems such as facial appearance change, reduced chewing efficiency, and temporomandibular joint disorders. In such case, it is necessary to re-establish occlusal plane and vertical dimension properly through accurate diagnosis and predictable treatment plan. This case report presents a 71-year-old female, whose occlusal plane was collapsed and posterior restorative space was insufficient. To perform a patient-friendly full mouth rehabilitation, proper vertical dimension and occlusal plane were decided by evaluation of interocclusal space at her physiologic mandibular rest position, swallowing, pronunciation, facial appearance, and the average length of anterior teeth. And then, the fixed provisional restorations were fabricated with the new occlusal position, and evaluated for 5 months with checking adaptation of masticatory muscles and any kind of clinical symptoms occurs or not. After confirmation of functional stability and esthetic satisfaction with the newly established occlusion, final definitive restorations were fabricated and inserted in the mouth. Through the above process, the treatment result was functionally and aesthetically satisfactory.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.237-253
• /
• 1998

Surgical-orthodontic treatment is performed for the skeletal Class III patients with no remaining growth and too big a skeletal discrepancy (or camouflage treatment, and two jaw surgery is needed in order to have maximum effect in such patients. In two jaw surgery cases, surgical alteration of the occlusal plane is necessary to establish optimal function, esthetics and postoperative sability, therefore the establishment of the occlusal plane is essential in diagnosis and treatment. The object of this study is to evaluate the stability of the indiviual ideal occlusal plane bsaed on the architectural and structural craniofacial analysis of Delaires. Thus, the subjects of this study were 48 patients who underwent two jaw surgery, and divided in two groups. Each group were composed of 24patients, A group were operated with ideal occlusal plane and B group were not. Two groups were compared at the preoperative, immediate postoperative (average 4.3days), and long-term postoperative (average 1.3years) lateral cephalometric radiographs. The following results were obtained: 1. There was no significance in occlusal plane angulation between $T_2\;and\;T_3$. Average long term follow-up changes of occlusal Plane angle were $0.24^{\circ}{\pm}2.43$, with FH plane and $0.15{\circ}{\pm}2.16{\circ}$ with SN plane in all 48 patients. These results demonstrated that the occlusal plane after two jaw surgery in skeletal Class III malocclusion was stable. 2. There was no significance in postoperative stability of occlusal plane between A and B group. 3. There was no significance in postoperative stability of occlusal plane depending on surgeon and operative method within each group. 4. The postoperative changes of occlusal plane were correlated to the postoperative changes of jaw rather than tooth position. 5. There was no correlation between the postoperative changes of occlusal plane and maxillary impaction and mandibular setback with surgery.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.44-54
• /
• 2023

In order to manufacture functional and esthetic prostheses, it is essential to accurately transmit information about the patient's occlusal plane. In particular, in the case of a completely edentulous patient, the occlusal plane is very important to correctly support the soft tissue, to achieve aesthetic harmony with the facial appearance, and to properly pronounce it, and to form a balanced occlusal relationship for stable mastication. In the conventional method, various facebow systems were used to transmit patient's information from the clinic to the laboratory, but there were several limitations in the process of transferring them to CAD. To simplify this process, a prefabricated POP (PNUD Occlusal Plane) Bow system was recently developed. In this case, a CAD-CAM (Computer-aided design-computer-aided manufacturing) treatment dentures reflecting the patient's occlusal plane information was manufactured using the POP Bow system during the treatment of a completely edentulous patient, and aesthetic and functional satisfaction was obtained.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.262-272
• /
• 2015

Loss of molar support and abnormal jaw relationship lead to occlusal disharmony and cause pathologic signs. Full mouth rehabilitations with reestablishment of occlusal schemes are needed. In this case, the 75 year-old female patient showed posterior bite collapse, irregular occlusal plane and Class II jaw relationship. By observing her profile and interocclusal distance, she was diagnosed as loss of occlusal vertical dimension. Treatment plan is to restore maxillay class I removable partial denture and mandibular fixed prosthesis and to establish vertical dimension and harmonious occlusal plane. Occlusal vertical dimension of 19 mm, which is obtained by 7.5 mm increase between maxillary right lateral incisor and mandibular canine, was established using temporary prosthesis via diagnostic wax-up. Patient adaptation with newly formed vertical dimension was verified during 8 week follow-up period. Within the information of interim prostheses, final restoration was constructed and delivered. The patient showed sound occlusal scheme and esthetic profile.