• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.670-676
• /
• 2000

Dohaengbyoung was prepared with the addition of glutinous rice at 0%, 10%, 20%, 30%, 40% or 50%, and their sensory quality and physical characteristics were compared. In sensory quality, the more glutinous rice was added, the higher the color intensity, moistness hardness, chewiness, springiness and cohesiveness were. Meanwhile, the more glutinous rice was added, the lower the color quality was. Dohaengbyoung with 20% glutinous rice showed the highest score in taste, texture, moistness and overall quality. The control sample with 0% glutinous rice showed the highest values in lightness(L) and redness(a) in color, and the more glutinous rice was added, the lower the values were. In textural characteristics, as the amount of glutinous rice increased, the hardness, cohesiveness, gumminess and brittleness of Dohaengbyoung were increased. The lightness and redness were negatively correlated with the moistness, hardness, cohesiveness and springness； however, they were positively correlated with the color quality. Scanning electron microscopy revealed that the addition of glutinous rice to Dohaengbyoung exhibited small pores and coarse surface.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.348-354
• /
• 2019

Recently, the application range of organic solvent nanofiltration (OSN) technology has been expanding, requiring membranes with better performance. In this work, thin film composite (TFC) OSN membrane was fabricated. First, ultrafiltration support membrane was prepared via nonsolvent-induced phase separation (NIPS) technique using polysulfone (PSf) and polyethersulfone (PES). Then, the effect of pore forming additives such as polyvinylpyrrolidone (PVP) and pluronic F-127 were employed to improve the membrane permeance. The well-known interfacial polymerization technique was employed using MPD-TMC chemistry to form a thin film on top of the fabricated support, and its solvent permeance and nanofiltration performance was characterized. It was found that polyethersulfone support exhibited more reliable performance compared to polysulfone, and PVP additive was more effective compared to Pluronic F-127. As for the oSN performance, polar aprotic solvents like acetonitrile show significantly higher flux (986.5 L·m^-2·h^-1·bar^-1) compared to water and EtOH (9.5 L·m^-2·h^-1·bar^-1).

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.123-129
• /
• 2016

This study is conducted to estimate the firing temperature and condition of the 4-6th Century earthenwares excavated from the ancient tombs in the Seonggok-ri, Cheongdo through mineralogical approaches, and to contrast to the characteristics of the earthenware from the Changnyeong the adjacent area to the Cheongdo. The Cheongdo earthenware was mainly composed of quartz, pores and vitric matrix with minor parts of feldspars, felsic volcanic fragments and opaque minerals, of which quartz crystals frequently show embayed texture and pores was partly filled with amorphous quartz. Mullite, hematite and cristobalite were found by XRD spectrometer additionally, and in the SEM image the Mullite contents are evenly distributed from the central part to the marginal part. As a result, the firing temperature of the Cheongdo earthenware could be 1,100 to $1,200^{\circ}C$, which is higher than that of the Changnyeong. Distribution characteristics of mullite in the Cheongdo and the Changnyeong earthenware indicate that the Cheongdo earthenware was under the longer firing time or more homogeneous thermal condition in the kiln than the Changnyeong.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.458-464
• /
• 2006

The Pd-Ni-Ag alloy composite membrane using modified porous stainless steel (PSS) as a substrate was prepared by a electroless plating technique. In this work, we have introduced the intermediate layer between Pd-based alloy and a metal substrate. As an intermediate layer, the mixtures of nickel powder and inorganic sol such as $SiO_{2}$ sol, $Al_{2}O_{3}$ sol, and $TiO_{2}$ sol were used. The intermediate layers were coated onto a PSS substrate according to various membrane preparation conditions and then $N_{2}$ fluxes through the membranes with different intermediate layers were measured. The surface morphology of the intermediate layer in the mixture of nickel powder and inorganic sol was analyzed using scanning electron microscope (SEM). Finally, the Pd-Ni-Ag alloy composite membrane using the support coated with the mixture of nickel powder and silica as an intermediate layer was fabricated and then the gas permeances for $H_{2}$ and $N_{2}$ through the Pd-based membrane were investigated. The selectivity of $H_2/N_2$ was infinite and the $H_{2}$ flux was $1.39{\times}10^{-2}mol/m^2{\cdot}s$ at the temperature of $500^{\circ}C$ and trans-membrane pressure difference of 1 bar.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.224-235
• /
• 2013

A passively fitting prosthesis is an essential prerequisite to attain long-lasting success and maintenance of osseointegration. However, true "passive fit" can not be achieved with the present implant-supported prosthesis fabrication protocol. Many clinical situations are suitably treated with cantilevered implant-supported fixed restorations. The purpose of this study was to compare the stress distribution pattern and magnitude in supporting tissues around ITI implants with cantilevered, implant-supported, screw-retained fixed prosthesis according to the fitness of superstructures. Photoelastic model was made with PL-2 resin (Measurements, Raleigh, USA) and three ITI implants (${\phi}4.1{\times}10mm$) were placed in the mandibular posterior edentulous area distal to the canine. Anterior and posterior extended 4-unit cantilevered FPDs were made with different misfit in the superstructures. 4 types of prosthesis were made by placing a $100{\mu}m$ gap between the abutment and the crown on the second premolar and/or the first molar. Photoelastic stress analysis were carried out to measure the fringe order around the implant supporting structure under simulated loading conditions (30 lb).

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 2003.09a
• /
• pp.109-109
• /
• 2003

성문 하방으로 진행된 후두암이나 하인두암, 기관의 침범이 있는 갑상선암 혹은 기공주변 재발암 등의 경우에 적절한 절제연을 얻기 위하여 상부기관륜 일부의 절제가 불가피하며 이때 만들어지는 영구 기관개구창은 일반적인 기관개구창에 비하여 하부에 위치하게 되며 보다 하부로의 기관 절제가 필요한 경우 기관과 주위 피부와의 봉합이 힘들고 경우에 따라서는 종격동 기관개구창을 만들어야 할 경우도 있다. 그리고 기관주위의 림프절이나 상부종격동 림프절 청소술을 병행한 경우나 후두전절제술 후 인두피부누공에 의한 창상감염이 생긴 경우, 기관주위 조직의 제거 후에 노출된 중요혈관의 보호와 광범위하게 제거된 결손부위를 덮기 위해 재건이 필요하게 된다. 대흉근피판은 혈관경이 일정하고 혈액 공급이 풍부하여 감염이 있거나 재건 후 감염을 방지하는데 사용될 수 있으며 피판 경의 길이가 대부분의 두경부 부위에 도달할수 있을 정도로 길고 근육의 부피가 충분하여 결손부위가 넓은 경우에 유용한 장점이 있다. 특히 종격동 림프절 청소술 후에나 하부 기관공의 재건을 위하여서는 한 수술시야에서 시행할 수 있는 인접한 부위 근피판 이라는 장점이 있고 필요시에는 이중도서(double-island) 형태로 접어서 이중피판으로 사용할 수도 있으며 피부이식과 병용하면 경부 피부의 재건도 동시에 시행할 수 있다. 저자들은 광범위한 기관륜의 제거 후 영구 기관개구창이 경부 하방이나 흥부 상부에 위치하게 되어 안쪽으로 말려들어가는 기관개구창 주변부위와 기관주위 결손 부위의 재건, 그리고 무명 동맥 등의 중요 구조물의 보호를 위해 사용된 대흉근 피판의 여러 작도법(design)과 응용, 결과를 종합하여 하부 기관개구창 재건에 있어 대흉근피판의 유용성을 살펴보고자 하였다. 한다. 본 연구의 결과를 이용하여 향후 전개될 홈 네트워크 서비스 및 관련시장의 발전 방향을 전망해 보고 이에 따른 기업이나 정부차원의 대응전략을 파악하고자 한다.육구에서는 큰 변화를 나타내고 있지 않았다(p<0.05). 운동과 비운동시킨 참돔의 지질 함량의 변화는 운동시킨 참돔은 운동으로 인한 에너지 소비로 인하여 함량이 유의적으로 감소했으며(r=-0.35), 비운동사육구에서는 절식으로 인하여 지질함량이 감소하였다(r=-0.38). 파괴강도와 가장 밀접한 영향을 가지는 콜라겐은 운동과 비운동 모두 사육기간동안 큰 변화는 보이지 않았다. 초기의 파괴강도값은 1.45±0.02kg(운동사육구), 1.36±0.18kg(비운동사육구)이였으며 사육기간동안 운동사육구는 파괴강도값이 증가한 반면, 비운동수조에서는 참돔의 파괴강도는 사육기간동안 큰 유의차가 없었다. 각 성분간의 상관도를 살펴보면, 수분함량과 파괴강도는 상관성을 가졌으며, 지질함량과 파괴강도도 같은 경향은 나타내었다. 운동기간동안의 파괴강도와 콜라겐 사이에는 상관성의 거의 없었다. 이는 운동기간에 따른 파괴강도의 증가가 콜라겐의 함량의 증가보다는 지질함량의 감소와 수분함량의 증가와 같은 성분과의 상관성이 크다고 판단된다. 다음으로는, 운동횟수에 의한 영향으로써 운동시간을 1일 6시간으로 설정하여, 운동횟수를 결정하기 위하여 오전, 오후에 각 3시간씩 운동시키는 방법과 오전부터 6시간동안 운동시키는 두 방법을 이용하여 품질을 비교하였다. 각 조건에 따라 운동시킨 참돔의 수분함량을 나타낸 것으로, 2회(오전 3시간, 오후 3시간)에 나누어서 운동시키기 위한 육의 수분함량은 73.37±2.02%를 나타냈으며, 1회(6시간 운동)운동시키기 위한 육은 71.74±1.66%을 나타내

• Korean Journal of Plant Resources
• /
• v.22 no.1
• /
• pp.31-36
• /
• 2009

The aim of this study was to examine geographic variation to support a genetic resource conservation plan of rare endemic Picea jezoensis (Siebold & Zucc.) Carriere. Three populations of P. jezoensis were analysed using multivariate analysis for 7 characteristics of needle morphology. In the morphological characters, seven characters of needle were 15.11 mm (needle length), 1.43 mm (needle width), 0.42 mm (needle thickness), 10.9 (length / width of needle), 3.6 (width / thickness of needle), 0.47 mm (Distance between resin duct and vascular), 17.4 ea. (number of stomata row), respectively. Nested analysis showed that were statistically significant differences among populations as well as among individuals within populations in 6 quantitative characters. In 5 of 7 characters, variance components among populations were higher than those among individuals within populations. Cluster analysis using complete linkage method showed two groups (Mt. Gyebang populations was genetically distinct from the other two populations) to Euclidean distance 0.4. Among principal components, primary 2 principal components appeared to be major variables because of the loading contribution of 100%.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.727-731
• /
• 2008

Mesoporous Pt-Au alloy films were successfully fabricated on ITO-coated glass by electrodeposition method using tri-blockcopolymer (P123) as a templating agent. The electrolyte consisted of 10 mM hydrogen hexachloroplatinate ($H_2PtCl_6$), 10 mM hydrogen tetrachloroaurate ($HAuCl_4$), and proper amount of P123. For comparison, control samples were electrodeposited without $HAuCl_4$ and P123. Film composition was determined by EDS(Energy Dispersive X-ray Spectroscopy), and the mesoporous structure was confirmed by TEM(Transmission Electron Microscopy). SEM(Scanning Electron Microscopy) was utilized to examine surface morphology, and it was observed that the addition of P123 affected the particle growth, resulting in the significant change of surface morphology. Methanol oxidation and CO oxidation were carried out to investigate electrocatalytic activities of synthesized samples. It was observed that the catalytic activity was strongly dependent on the film compositions. Compared with nonporous electrode prepared without P123 templating, mesoporous films prepared with P123 templating showed much higher catalytic activities and stability for both methanol oxidation and CO oxidation. These enhanced electrocatalytic activities were due to the high surface area and facilitated charge transfer of mesoporous films.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.381-386
• /
• 2010

The berry growth and pericarp characteristics were characterized to confirm the effects of bagging periods on berry cracking during berry development in 'Kyoho' grape. The berry weight was the highest at 13.4 g in late period of bagging treated at 7 to 9 weeks after full bloom (WAFB) as compared with the lowest of 12.3 g in total period bagging. The berry cracking rate under critical turgor pressure in the non-bagging control was 53.3%, while those of bagging treatments were decreased in the order of 42.7%, 37.3%, 33.3%, and 18.7% in bagged during 3 to 9, 3 to 5, 5 to 7, and 7 to 9 WAFB, respectively. In the results of observation on histological characteristics of pericarp, berry lenticels of whole bagging treatments had smaller and normal shape compared with non-bagging control treatment. Especially on the pericarp of late period bagged during 7 to 9 WAFB, suberization around stomata and micro-cracking were not observed and structural strength of pericarp was increased with thicker sub-epidermal layer and cell wall. Therefore, the results indicate that bagging treatment for two weeks just before the veraison when the day length and daylight is relatively longer and stronger can effectively reduce berry cracking by strengthening structure of pericarp in 'Kyoho' grape.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.350-355
• /
• 2019

For the success of complete denture, three essential requirements such as retention, stability and support are needed. Moreover, due to the absorption of residual ridge and scarring due to the surgery, when making a complete denture, which is difficult to form the mandibular lingual margins, various considerations such as the arrangement of the Non-anatomical dl non-anatomical teeth, the polished surface impression, the internally weighted metal framework and the use of the denture adhesive cream are necessary. In this case report, the patient has a severely resorbed edentulous ridge from severe periodontitis and has some soft tissue problems after the glossectomy due to tongue cancer. To obtain additional retention and stability, some trials such as polished surface impression taking, internally weighted metal insertion and minimal pressure impression were done for the better result. Moreover To make a metal framework that precisely shapes the desired three-dimensional shape and reduces the complicated process, minimal pressure impression method and direct metal laser sintering technique were used.