• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1119-1125
• /
• 2000

용융 Si 침윤 방법에 의한 새로운 다공질 RBSC 제조공정이 개발되었으며, 용융 Si 침윤공정 방법으로 제조된 다공질 RBSC의 최대 3-점 파괴 강도는 18 MPa, 최대 기공율은 46% 범위이었다. 용융 Si 침윤방법으로 제조된 다공질 RBSC의 기계적 특성 및 기공율은 성형체내 SiC 입자 표면의 카본 source의 양 및 침윤시 사용된 Si의 양에 직접적으로 영향을 받는 것으로 나타났다. 침윤시 상대 Si 양은 40%를 사용하였으며, SiC 입자 표면에 graphite와 phenol resin을 함께 코팅한 성형체를 사용하여 제조된 다공질 RBSC에서 최대 파괴강도 값을 얻었다. 상대 Si의 양의 증가는 다공질 RBSC의 파괴강도를 감소시켰으며, SiC 입자 표면의 카본 source 코팅층은 graphite와 phenol resin을 같이 사용하였을 때 다공질 RBSC의 파괴강도는 증가되었으나, RBSC 내 기공율은 감소되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.323-323
• /
• 2022

증발산은 지표면과 식물의 엽면적에서 액체가 기체로 기화되는 현상으로 수자원적 측면에서는 지표의 이용 가능한 물이 대기 중으로 손실됨을 의미하며, 증발산 요소는 온도, 습도, 바람의 영향에 의한 변동이 크며 특히 토양수분의 가용성에 큰 영향을 미친다. 국내의 피복 환경은 주로 산지 사면으로 이루어져 있어 증발산량의 특성이 대체적으로 지면의 증발보다 식물의 뿌리로부터 흡수되어 잎의 기공으로 발생하는 증산작용이 지배적이다. 증산작용이 발생하는 메커니즘은 기공을 열어 광합성에 필요한 이산화탄소가 흡수하는 과정에서 물의 손실이 발생하는데 대기 중 이산화탄소의 농도가 높으면 기공이 빠르게 닫혀 증산량도 줄어들어 대기 중으로 물 손실이 줄어드는 현상이 관측된다. 따라서 본 연구에서는 국내 설마천 소유역에서 유출량, 강우량, 토양수분, 증발산량 등과 같은 수문 요소가 이산화탄소 플럭스와 상관성을 분석해보고자 한다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.1
• /
• pp.9-14
• /
• 2008

The effect of different porosity of onggis, Korean earthenware, on the fermentation of kochujang was investigated. The porosity was controlled with glazing treatment. Three kinds of onggis were made: one with no glazing treatment, one with outside glazing treatment, and one with both inside and outside glazing treatment. During 4 month fermentation of kochujang in porosity-controlled earthenwares, physical, chemical, microbiological, and sensory quality attributes were monitored. Higher protease activity and higher contents of amino nitrogen, free amino acids, and total neucleotide were observed in kochujang fermented in the onggi with outside glazing treatment, which might have resulted in better sensory quality. Onggi with medium porosity could be effective for fermentation of kochujang.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.6
• /
• pp.323-327
• /
• 1997

Addition of growth inhibitors such as ancymidol, ABA, chloromequat, and pachlobutrazol into MS medium had no effect to preventing vitrification in cultures of Rehmania glutinosa. Anatomical investigation revealed that vitrified thick leaf tissue in vitro had larger intercellular space with poor development of sponge and pallisade tissue compared to those of in vitro grown glaucous and field grown plants. In vitro grown glaucous leaf had smaller and round type stomata showing distinguishable guard and subsidiary cell than those of reestablished plantlets into soil whereas abnormal stomata and poor development of epicuticular wax on the surface of leaf was observed in verified plantlet.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.88.2-88.2
• /
• 2012

활성 물질의 원활한 확산을 위한 경사형 마이크로 기공과 넓은 반응 면적을 제공하는 나노 기공을 동시에 가지는 하이브리드 다공성 구리의 전기화학적 합성법이 보고된 이후, 이를 기능성 전기화학 장치에 활용하기 위한 많은 연구가 진행되고 있다. 하지만, 구리는 일반적으로 전기화학적 비활성 물질이기 때문에 전극 활물질로서 직접 활용되는 것은 극히 제한적이다. 또한, 전해 도금에 의하여 합성되므로 비전도성 기재 위에 형성이 불가능하여, 비전도성 기재가 기본이 되는 장치에 적용하는 것 역시 어렵다. 본 연구에서는 전해 도금법을 기본으로 하여 마이크로-나노 하이브리드 다공성 구조를 가지는 니켈을 전도성 및 비전도성 기재 위에 형성하였다. 전도성 기재 위에 제조된 니켈의 구조는 전반적으로 기존의 다공성 구리와 거의 유사하였으나 마이크로 기공의 밀도와 수지상의 형태에 있어 차이점을 보였다. 비전도성 기재 위에 형성된 니켈의 경우에는 중간 열처리 과정으로 인해 나노 수지상 구조의 다소간의 뭉침이 발견될 뿐 전도성 기재 위에 형성된 니켈과 구조가 동일하였다. 전도성 및 비전도성 기재 위에 형성된 니켈 다공성 구조를 기본을 하여 각각 전기화학적 캐패시터용 전극과 연료전지용 전극을 제작하였고, 기본적인 전기화학 특성을 파악하여 니켈 다공성 구조의 응용 가능성을 타진하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.284-293
• /
• 1994

The various methods of preparation for the porous hydroxyapatite ceramics using naphthalene, $H_20_2$ and chlorinated paraffine with $H_20_2$ were investigated. And then the prepared orous hydroxyapatite ceramics were characterized by XRD, SEM, FT-IR and the apparent porosity. The pore size of porous hydroxyapatite ceramics was controlled by the content and size of naphthalene granular. It was found that the porosity of it was increased with the amount of naphthalene, but the bending strength was decreased. The application of hydrogen peroxide produced porous materials like a sponge tissue, but the porosity and the shape of sintered body were hardly controlled. In the case of using chlorinated paraffine with the simultaneous addition of hydrogen peroxide, the sponge tissue was obtained and also could be controlled from 50 up to about 65% porosity of it.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.309-317
• /
• 2011

The effect of physical properties of coal fuels and carbon particle on performance of DCFC (Direct Carbon Fuel Cell) was investigated. Shenhua and Adaro were selected as coal fuel and carbon particle was used for comparing with coal. The Ultimate, proximate, SEM, XRD, and BET analysis of samples were conducted. The component of char was more important than that of raw coal because the operating temperature of reactor is higher than devolatilization region of coal. The surface area and volume of pores affected significantly the performance of the system than content of fixed carbon or char rates. The performance of DCFC with carbon particle was in proportional to working temperature.

• Korean Journal of Psychosomatic Medicine
• /
• v.12 no.2
• /
• pp.135-144
• /
• 2004

Objectives: The aim of this study was to examine the effectiveness of a qigong-based stress management program in pregnant women. Method: A 8 week controlled clinical trial compared 52 pregnant women assigned qigong-based stress management program to 40 pregnant women assigned pregnancy health education program. Edinburgh postnatal depression scale(EPDS), Beck depression inventory(BDI), Spielberger trait state inventory-1(STAI-1), Hamilton depression rating scale(HAM-D), Hamilton anxiety scale(HAM-A) were used to measure anxiety and depression level. Result : Qigong-based stress management group showed significant improvement compared to the education control group on four measures above. Qigong-based stress management group also showed significant improvement at 8 weeks termination on all measures of anxiety and depression compared to pretreatment level. Conclusion : This study showed that qigong-based stress management program can be an effective method for pregnant women.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.299-314
• /
• 2021

In this study, we investigated the effect of temperature on specific surface area and electrochemical properties when lignin-based porous carbon (LBPC) with potassium hydroxide (KOH) is activated. After preparing LBPCs using lignin-polyacrylonitrile (PAN) copolymer, which was synthesized by graft polymerizing lignin and acrylonitrile as a precursor, activated LBPCs (KA-LBPC-6, 7, 8, 9) were manufactured by activating LBPC with KOH at 600℃, 700℃, 800℃ and 900℃. To identify the surface characteristics of KA-LBPC, observations were made with a scanning electron microscopy (SEM), and the pore characteristics were identified via specific surface area analysis. The electrochemical properties were analyzed using a three-electrode system. The experiment has shown that micropores formed by activation can be observed in SEM images. KA-LBPC-7 had the best pore characteristics among KA-LBPCs, with a specific surface area of 2480.1 m²/g, a micropore volume of 0.64 cm³/g, and a mesopore volume of 0.76 cm³/g. KA-LBPC-7 showed the best electrochemical properties with a specific capacitance of 151.3 F/g at the scan rate of 2 mV/s.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.528-533
• /
• 2004

Macroporous SiC with pore size 84∼658 nm and mesoporous SiC with pore size 15∼65 nm were respectively prepared by infiltrating low viscosity preceramic polymer solutions into the various sacrificial templates obtained by natural sedimentation or centrifuge of 20∼700 nm silica sol, which were subsequently etched off with HF after pyrolysis at 1000∼140$0^{\circ}C$ in an argon atmosphere. Three-dimensionally long range ordered macroporous SiC ceramics derived from polymethylsilane (PMS) showed surface area 584.64$m^2$g$^{-1}$ when prepared with 112nm silica sol and at 140$0^{\circ}C$, whereas mesoporous SiC from polycarbosilane (PCS) exhibited the highest surface area 619.4 $m^2$g$^{-1}$ with random pore array when prepared with 20-30 nm silica sol and at 100$0^{\circ}C$. Finally, tile pore characteristics of porous SiC on the types of silica sol, polymers and pyrolytic conditions were interpreted with the analytical results of SEM, TEM, and BET instruments.