• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.57.1-57.1
• /
• 2012

금속을 용해 응고시킬 때 생성되는 소위, 주조 결함이나 소결금속 내의 기공은 재료의 성능이나 강도를 현저하게 낮추는 결함으로서 예전부터 기피되어 왔다. 또한, 재료공정에 있어서도 여하의 기공이나 기포가 없는 치밀한 고강도 및 고기능성 재료를 개발하는 것에 최대한의 주의와 관심을 기울여 왔다. 반면에 자연계의 천연물이나 인공물을 둘러보면 그 대부분이 다공질임을 쉽게 눈치챌 수 있다. 예를 들어 목재, 지엽 등의 생물을 시작해서 콘크리트 등의 인공물, 우리 체내의 뼈도 전형적인 다공질구조로 구성되어 있다. 이러한 구조로부터 재료의 재질제어 이외에 구조제어라는 새로운 어프로치를 고려할 수 있고, 최근 들어, 금속재료에 있어서도 이러한 다공질 구조에 관한 연구가 활성화되어 충격흡수재, 생체재료, 베어링재료 등의 다양한 응용이 전개되고 있다. 원주상의 방향성 기공을 갖는 로터스 금속의 제조 원리는 용융금속의 높은 가스용해도와 고체금속의 낮은 가스고용도의 차이를 이용하여 응고할 때 고용되지 않는 가스원자가 기포를 형성시키는 것이다. 수소용해도는 모든 금속에 있어서 온도상승에 따라 증가하지만 융점에 있어서 용해도의 불연속적 증가를 나타내며 응고할 때 고액계면에서 다량의 가스를 방출하고 기공 생성을 야기한다. 특히, 고 액상에 있어서 수소용해도 차가 큰 마그네슘, 니켈, 철, 동 등은 기포를 생성하기 쉽다. 또한 기공의 배열구조를 제어하기 위해 일방향응고법를 이용하여 기공에 방향성을 부여한다. 외관상 기공구조가 연근뿌리를 닮은 것으로 부터 로터스 금속이라는 명칭이 널리 알려져 있다. 이와 같은 제조방법에 의해 로터스 금속은 기공 방향, 기공크기, 기공률을 자유롭게 제어할 수 있고 우수한 기계적 성질이 기존의 발포금속, 소결금속과 전혀 다른 특성을 가지고 있다. 이러한 기공구조는 용해온도, 응고속도, 분위기 가스압, 불활성가스와의 혼합체적비 등의 제어를 통해서 조절할 수 있다. 이와 같이 제조한 방향성 다공질금속은 BT (인플란트, 생체적합성, 저탄성, 경량), ST (초음속기엔진부품, 경량), IT (고성능수냉모듈), ET(고온촉매, 필터)의 분야로의 응용을 기대한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.909-912
• /
• 2008

Fiber is an important ingredient in strain-hardening cementitious composite (SHCC), which can control fracture of cementitious composite by bridging action. The properties of reinforcing fiber, as tensile strength, aspect ratio and elastic modulus, have great effect on the fracture behavior of SHCC. But SHCC has serious problem as drying shrinkage because silica powder is used to make SHCC in order to improve bond strength between reinforcing fibers and cement matrix. Therefore, curing method (period and temperature) is very important for SHCC to show high tensile performance. a variety of experiments have being performed to access the performance of SHCC recently. This research emphasis is on the mechanical properties of SHCC made in Polyvinyl alcohol (PVA), Polyethylene (PE) fibers and steel cord (SC), and how curing method affects the composite property, and ultimately its strain-hardening performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.236-241
• /
• 2011

Mechanical properties of cancellous bone with a high porosity and cortical bone with a high fraction of solid are estimated by the measurement of ultrasonic wave propagation. The speed of sound (SOS) in ultrasonic waves is usually measured by two equations, bulk wave equation and bar wave equation. Bulk wave speed has almost same as the fast wave of Biot's theory. In this study, we examine whether the bulk wave speed is influenced by the anisotropy of bone matrix. The SOS when the bone matrix is isotropy is 0.69% faster than that when the bone matrix is transversely isotropy. We also examine if the use of bar equation is adequate for a cortical bone. In the previous paper, the bar wave speed is a function of Young's modulus or elastic coefficient tensor. In the same manner, the effect of bar wave speed to isotropic and anisotropic bone is estimated.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.240-246
• /
• 1995

The responses of red tile fish, Branchiostegus Japonicus to a longline gear were examined in an experimental tank using two video cameras, in order to know hooking mechanism and improve longline hook. In attraction stage, the fish swim to upstream direction slowly just above the bottom toward the baited hook. The majority of the fish then biting the bait incompletely, after the biting, the fish made a backward swimming with low intense, and the bait was usually spitting out when snood was stretched. In most case, hooking took place at the moment the fish made jerk or rush after the bait wallowed. The behaviour sequence closely related to hooking are chewing and jerking or chewing and rushing. According to the field experiments, the tested hooks of long shank show very low catching efficiency compared to the traditional hook with short shank, and the hooked position of the traditional hooks were oesophagus or stomach but the tested hooks were mouth in the most cases. For catching efficiency, desirable hook shape were inferenced inner-curved point and short shank because its ease to swallow. The shape and demensions of a porposed hook were determined in consideration of mechanized gear handling and hooking performance.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.1
• /
• pp.27-36
• /
• 2019

In this paper, we propose a method to find the most similar answer to the user's response from the question-answer database in order to avoid generating a redundant question in retrieval-based automatic question generation system. As a question of the most similar answer to user's response may already be known to the user, the question should be removed from a set of question candidates. A similarity detector calculates a similarity between two answers by utilizing the same words, paraphrases, and sentential meanings. Paraphrases can be acquired by building a phrase table used in a statistical machine translation. A sentential meaning's similarity of two answers is calculated by an attention-based convolutional neural network. We evaluate the accuracy of the similarity detector on an evaluation set with 100 answers, and can get the 71% Mean Reciprocal Rank (MRR) score.

• Korean Journal of Social Welfare Studies
• /
• v.47 no.3
• /
• pp.85-111
• /
• 2016

This study aims to analyse major changes of Mental Health Promotion and Welfare Service Support Act(MHPWSSA) and critically discuss these changes based on the major discourses on Mental Health Act revision. For this purposes this study reviewed literatures and government reports to understand human rights discourses, welfare discourses, and prevention discourses. Secondly, the major changes of MHPWSSA were analysed and discussed based on those discourses. This study found that MHPWSSA defined the concept of people with mental disorders narrowly, tightened the involuntary admission procedures, introduced welfare service support provisions and mental health promotion provisions. But this study shows that the new legislation may well be criticised due to neglect of the concept of disability and people with psychiatric disability, involuntary admission without mental capacity assessment, neglect of the basic values and principles of self determination and independent living common in welfare of the persons with disability. And the new legislation may be criticised due to overuse of the concept of mental health promotion as encompassing promotion, prevention, treatment and rehabilitation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1500-1506
• /
• 2020

In this paper, we study a scheduling problem based on reinforcement learning for overlay device-to-device (D2D) communication networks. Even though various technologies for D2D communication networks using Q-learning, which is one of reinforcement learning models, have been studied, Q-learning causes a tremendous complexity as the number of states and actions increases. In order to solve this problem, D2D communication technologies based on Deep Q Network (DQN) have been studied. In this paper, we thus design a DQN model by considering the characteristics of wireless communication systems, and propose a distributed scheduling scheme based on the DQN model that can reduce feedback and signaling overhead. The proposed model trains all parameters in a centralized manner, and transfers the final trained parameters to all mobiles. All mobiles individually determine their actions by using the transferred parameters. We analyze the performance of the proposed scheme by computer simulation and compare it with optimal scheme, opportunistic selection scheme and full transmission scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.467-473
• /
• 2020

Recently, the number of traffic accidents has also increased with the increase in the penetration rate of cars in Korea. In particular, not only inter-vehicle accidents but also human accidents near crosswalks are increasing, so that more attention to traffic safety around crosswalks are required. In this paper, we propose a system for predicting the safety level around the crosswalk by recognizing an approaching vehicle and estimating the speed of the vehicle using NVIDIA Jetson Nano-class edge devices. To this end, various machine learning models are trained with the information obtained from deep learning-based vehicle detection to predict the degree of risk according to the speed of an approaching vehicle. Finally, based on experiments using actual driving images and web simulation, the performance and the feasibility of the proposed system are validated.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1083-1095
• /
• 2020

Since 2019, ultrasound and magnetic resonance imaging for evaluation of urogenital disorders have been covered by the National Health Insurance (NHI) in Korea. Patients with urogenital malignancies were already insured by NHI for ultrasound and MRI. With the expansion of NHI coverage, patients with suspected prostate or gynecologic cancer, uterine fibroids before myomectomy and some other benign disease such as congenital anomaly can receive benefits of NHI. In consideration of these changes, radiologists and other clinicians should be aware of the indications and standard images of each examination and the required reporting forms. Clinical application based upon thorough understanding of the NHI guidelines will aid in improving the standard care of patients.

• Journal of Science of Art and Design
• /
• v.11
• /
• pp.5-35
• /
• 2007

When it comes to art, the two conflicting themes of 'scientific progress' and the 'nature' have often motivated the advent of the new mode of arts. By the late 20th century, uniform and simplified mode of arts, inspired by scientific and technological progress of that time, was gradually disillusioned by the contemporaries due to the adverse effect of science on human life. In this context, naturalism pursuing for harmony of human and the nature came up as an alternative to those living in the 21st century. The pendulum has swung from minimalism to naturalism. Though the quantitative improvement of human life cannot be denied, the uprise of such problems as environmental pollution and exhaustion of natural resources degraded the quality of human life, which, eventually, shifted the attention to the theme - 'revival of naturality.' Therefore, this thesis intends to represent the modem interpretation of the 'revival of naturality' by applying the major expressions of Art Nouveau that also emphasized naturalism. Art Nouveau found its motifs from organic figures of natural beings and put them to designs of decorative arts. This carries a historical significance in that Art Nouveau boldly revolutionized historicism, which only repeated adoption and modification of the existing modes of arts, and opened it to the modem design with new attempts to practical applications of the arts. Art Nouveau, which means 'new art', prospered from the late 19th century to the early 20th century, and even after one century, it is highly appreciated, reviving as novel and vivid forms in this contemporary art. Art Nouveau based on naturalism has revisited our contemporary period when naturalism and feminized romanticism came into fashion and its common motifs revive in different jenre of arts such as fashion, furniture, glass works, and jewelry works. This study illustrates and analyzes the works of four major artists who gave a specific attention to botanical motifs of Art Nouveau and applies decorative beauty of highly sophisticated and organic curved lines and the expressional forms of botanical figures to design. Art Nouveau proved this; the nature herself is as beautiful as she can be. Within Art Nouveau, the true humanism can be revitalized with the 'revival of naturality'. This study rediscovered the boundless potential of modern interpretation and application of Art Nouveau in decorative art and design.