• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.9-16
• /
• 2018

Recently, the demand for eco-friendly parts has increased to reduce materials and parts that use fossil fuels. This has exacerbated the increase of energy prices and the enforcement of regulations by environmental agencies. Currently, polylactic acid (PLA) is a solution, as a common and eco-friendly material. PLA is a biodegradable material that can replace traditional petrochemical polymers. PLA has great advantages since it is resistant to cracking and shrinkage. When it is manufactured, there are few harmful byproducts. Improvement in the brittleness characteristics is another important task to be monitored throughout the production of industrial parts. Improvement in the brittleness property of products lowers the tensile strength and tensile elasticity modulus of the parts. This study focused on the mechanical properties of 3D-printed PLA parts. Tensile tests are performed while varying the infill print parameters to evaluate the applicability of PLA in several industrial areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1620-1625
• /
• 2015

In this study, a variety of industrial gears, shafts, chains, rollers, mold, etc. are widely used inautomotive steel carbon steel for machine structural SM45C typical material used for the experiments. In order to cure the surface of the test piece after the rough grinding and fine grinding was performed in order polishing. Perform the surface hardening of SM45C lacal area by using a diode laser. The output of the laser diode and the feed rate to the process variable. Micro-hardness testing, microstructure testing, scanning electron microscope testing(SEM), the heat input to the analysis. After analyzing the experiment to compare the mechanical properties of the material. When using a diode laser to assess the soundness of the surface hardening. Accordingly, the process for deriving the optimum demonstrate the feasibility.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2158_2159
• /
• 2009

본 논문에서는 DC전원설비 접속부에서의 접촉불량에 의한 발열 특성에 대하여 실험, 분석하였으며 사용된 DC 전원설비는 상용 교류전원을 직류전원으로 변환하는 AC/DC 컨버터의 출력전원을 이용하는 LED 가로등 조명설비의 전원 접속부을 대상으로 하였다. 외부의 기계적 진동에 의해 동전선 접속부에 아크와 열이 발생하며 이때 발생한 발열 온도와 열 분포를 측정하였으며 적열부가 형성된 후 25분이 경과하였을 때 최고 $842.68^{\circ}C$까지 온도가 상승하였으며 접속부의 접촉전압은 1.5~1.6V, 통전전류는 6.6~6.9A로 약간의 변화만 나타남을 볼 수 있었다. 또한 DC전원에서 동전선 접속부에서의 산화물 생성과 증식 거동에 대하여 분석하였으며 AC전원에서와 유사하게 산화물이 형성되어 성장함을 볼 수 있었다. 이러한 실험과 분석 결과는 향후, DC 전원설비에서의 전기화재 예방을 위한 자료로 활용 가능할 것으로 기대된다.

• Annual Conference on Human and Language Technology
• /
• 2003.10d
• /
• pp.7-13
• /
• 2003

인터넷을 통해 생성, 전달되는 문서 량이 급격히 많아짐에 따라, 정보의 접근을 용이하게 하기 위한 문서의 자동 분류 기능이 절실히 요구되고 있다. SVM(Support Vector Machine)은 최근에 문서 분류에 널리 쓰이고 있는 기법으로 다른 분류기에 비하여 좋은 성능을 보여주고 있다. 하지만 SVM은 현재까지 주로 비 계층 평탄화(flat)된 분류 응용에 효과적으로 적용되어 왔다. 이와 달리 본 논문은 문서 분류에 있어서 최종 분류 class를 한번에 출력하는 비 계층 분류보다는, 비슷한 성질을 갖는 class의 집합을 계층적 구조로 묶어 분류하는 계층적 분류 기법이 보다 사람이 이해하기 쉽고 사용하기 편리하며 더 효과적이라는 것을 보이고, 실험을 통해 계층적 분류를 위한 효과적인 SVM분류기를 개발하여 비 계층 분류보다 좋은 분류 성능을 보여 줄 수 있음을 확인한다.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.175-185
• /
• 2016

In this study, manufactured experimental pig house (two pig house) and compared the changes in internal temperature and energy depending on the application of UTC control system for their utilizing of them as basic data for maintaining proper conditions for feeding environment and reducing heating energy depending on the UTC control system and program development, prior to applying the UTC system into pig house, representative agricultural facility. The control system ranges T1~T4 which is made to control a total of five output signals O1~O5 in the way of On/Off by using the algorithms of the program after measuring temperature scored 4 of total. Temperature setting was controlled with 28.0℃ in experimental pig house and 34.0℃ in UTC plenum, and output signal was controlled by comparing it with the measured temperature. During 3 days, the maximum temperature were measured at an average 31.8℃ when operated the control system in pig house. At the same time, the maximum temperature were measured 36.6℃ in comparison pig house, it was low temperature at 4.8℃ in experimental pig house than comparison pig house. Also, UTC plenum temperature was showed that rose at an average 50.5℃ by operation of the control program.

• Current Research on Agriculture and Life Sciences
• /
• v.28
• /
• pp.53-62
• /
• 2010

The effect of far-infrared (FIR) irradiation on the functional compounds of grape seeds extract were evaluated. Grape seed was dried on different heating power (0, 900, 1800 W) and heating time (0, 20, 40 min) with far-infrared drier. Contents of soluble solids, catechins, total phenolics and total flavonoids along with Hunter's color value, electron donating ability (EDA) and nitrite scavenging activity were analyzed. The soluble solids, Hunter's L value and a value were not significantly different from control samples. Cathechin, procyanidin $B_2$ and epicatechin contents changed with heating time. In the treated sample, total cathechins content was found maximum at 900 W of heating power and 20 min of heating time with a high level of total phenolics, total flavonids and EDA. These results indicated that FIR irradiation of grape seed could enhance antioxidant activities of its extracts by increasing the amounts of functional compounds. Moreover, response surface methodology(RSM) was applied to predict optimum conditions for heating by FIR rays of grape seeds. Based on superimposition of contour map with respect to total phenolics, total catechin and EDA, optimum ranges of heating conditions were heating power of 621.82~818.18 W and heating time of 16.3~19.83 min.

• Korean Journal of Agricultural Science
• /
• v.17 no.1
• /
• pp.45-51
• /
• 1990

This study was conducted to obtain basic data for the design of cooling system by the test of engine performance of the power tiller being used widely in the rural area. Among the various factors affecting engine performance, the flow rate of cooling water was considered as the major factor in this study. Motoring loss, output, fuel consumption ratio, torque, heat absorption of cooling water, and thermal efficiency were measured and analyzed based on three flow rates of cooling water such as 15, 20, and $25{\ell}/min$. The results obtained were as follows : 1. Motoring loss of the engine was 1.371 kW at 2,200 rpm., and mechanical efficiency was 79.1% at rated output level. 2. Output power of the engine increased with the flow rate of cooling water increased. 3. BSFC was 282.9g/kW-h at the flow rate of $20{\ell}/min$, and the temperature of cooling water at outlet was $80.9^{\circ}C$. 4. There was a little variation of torque of the engine depending on the flow rate of cooling water. 5. Absorption of heat by cooling water was increased with the increase of flow rate. 6. The highest thermal efficiency of 32.3% at the flow rate of $20{\ell}/min$ was observed.

• Membrane Journal
• /
• v.11 no.1
• /
• pp.38-49
• /
• 2001

The surface of polyimide membrane was modified by plasma treatment using Ar and NH~. and the permeability and selectivity for the mixture gas $(CO_2/N_2=20/80 vol%)$ were measured. The per¬meation experiments were performed by a variable volume method at $30^{\circ}$C and total pressure of 5 atm, The effect of the plasma conditions such as treatment time, power input, gas flow rate and pressure in the reactor on the transport Dwperties of modified membranes was investigated. The surface of the plasma treated membrane was analyzed by means of FTlR - ATH, ESCA and AFM. The dependences of the wettability and the etching on plasma treatment time were investigated by use of the contact angle and the weight loss measurement. Measurements of gas pcnneability characteristic were performed using both dry and wet membranes. The effects of experimental conditions such as temperature on the membrane performance were studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.334-339
• /
• 2020

In this study, the adhesion properties between aluminum and composite materials, composite materials, and composite materials were compared according to the physical surface treatment to improve mechanical bonding at the bonding surface when considering carbon fiber and glass fiber-reinforced composite materials. Bonded specimens were classified into the type of base material and the surface treatment method of the bonding surface. Sandpaper, sandblasting, and plasma were applied as physical surface treatment methods. The bonded specimen was prepared as a single lap joint test specimen. An experiment to measure the lap shear strength was conducted, and the results were compared. The experimental results confirmed that the mechanical abrasion and sandblasting treatment improved the lap shear strength approximately 4 to 5 fold compared to the general specimen without physical surface treatment. In plasma treatment, the experiment was conducted by defining the respective plasma output and treatment time as follows: 150 W and 5 minutes, 150 W and 10 minutes, and 300 W and 3 minutes. Moreover, the lap shear strength results were similar to the previous mechanical surface treatments. On the other hand, the effect on the adhesion properties was small, depending on the plasma treatment conditions.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.913-915
• /
• 2001

본 논문에서는 유한 요소법을 압전체에 적용하여 계산한 임피던스 파형을 실험적으로 검증하였으며 이를 압전 변압기에 적용하여 압전 변압기의 공진 특성 즉 입력측에서의 전기적인 임피던스 및 출력측에서의 전기적인 임피던스를 해석하였다. 또한 압전 변압기의 공진 모드를 나타내는 어드미턴스 궤적을 이용한 압전 변압기의 등가 회로 정수의 계산을 통해 등가 회로를 구성하였으며 무 부하시의 승압비를 계산하였다. 등가 회로를 이용하여 계산된 승압비의 결과를 유한 요소법을 이용한 결과와 비교하여 손실을 나타내는 등가 회로 정수(R)를 계산하였으며 유한 요소법에 의한 기계적인 진동 손실의 결과와 비교하여 계산된 저항(R)값의 타당성을 검증하였다.