• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.56-56
• /
• 2004

섬유강화 복합재료는 응용범위가 산업계 전반으로 빠르게 확대되고 있다. 개발 초기에는 하중을 감당하지 않는 이차 구조물에 주로 사용되어 왔으나, 점차 산업 전반의 I차 구조물(Primary Structure)에 쓰이는 등, 그 사용범위가 넓어지고 있으며, 취약한 두께방향 물성 향상의 필요성을 충족시키기 위해 다축경편(MWK) 복합재료에 대한 연구가 진행되고 있다. 본 논문에서는 다축경편(MWK) 복합재료의 기계적 체결부에 관한 응력해석을 연구하였다.(중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.1-9
• /
• 2002

There is the high possibility of crack initiation from mechanical joints, which are widely used in aircraft fuselages, due to the development of stress concentration and contact pressure. In this paper, the mixed-mode stress intensity factors at the surface and deepest points of an inclined quarter elliptical corner crack in mechanical joints are analyzed by the weight function method. The coefficients included in the weight function are obtained by finite element analyses for reference loadings. Critical angle at which mode I stress intensity factor becomes maximum is determined by analyzing the variation of stress intensity factors along incline angle of crack and the effects of the amount of clearance and crack depth on the critical angle are investigated.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.187-192
• /
• 2001

Cracks in mechanical joints is generally under mixed-mode and there is the critical inclined angle at which mode I stress intensity factor becomes maximum. In order to evaluate the fatigue life of cracks in mechanical joints, horizontal crack normal to the applied load and located on minimum cross section is major concern but critical inclined crack must also be considered. In this paper mixed-mode fatigue crack growth test is performed for horizontal crack and critical inclined crack in mechanical joints. Fatigue crack growth path is predicted by maximum tangential stress criterion using mode I and mode II stress intensity factors obtained from weight function method, and fatigue crack growth rates of horizontal and inclined crack are compared.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.165-170
• /
• 2000

The weight function method is an efficient technique to calculate the stress intensity factors for various loading conditions in that only the stress analysis of an uncracked model is required. This paper analyzes the mixed-mode stress intensity factors of surface and deepest points for quarter elliptical surface cracks in mechanical joints by weight function method and the coefficients included in weight function are determined by finite element analyses for reference loadings. Results for the different number of terms in weight function are presented.

• Journal of the KSME
• /
• v.52 no.1
• /
• pp.45-49
• /
• 2012

플라스틱과 같은 고분자 재료는 특유의 부정형 분자 구조 때문에 기온의 변화 등의 외부적 요인에 의하여 초기 설계에 사용된 고유의 기계적 물성이 변화함에 따라 형태의 변형이 발생하여 부품으로 쓰였을 때 체결부가 느슨해지거나 마찰을 유발하여 이음, 즉 BSR을 발생시킨다. 이 글에서는 고분자 재료의 물리적 거동 특성 및 BSR 발생메커니즘에 어떤 영향을 미치는지에 대하여 기술하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.187-194
• /
• 2002

It has been reported that cracks in mechanical joints is generally under mixed-mode and there is critical inclined angle at which mode I stress intensity factor becomes maximum. The crack propagates in arbitrary direction and thus the prediction of crack growth path is needed to provide against crack propagation or examine safety. In order to evaluate the fatigue life of cracks in mechanical joints, horizontal crack normal to the applied load and located on minimum cross section is major concern but critical inclined crack must also be considered. In this paper mixed-mode fatigue crack growth test is performed far horizontal crack and critical inclined crack in mechanical joints. Fatigue crack growth path is predicted by maximum tangential stress criterion using stress intensity factor obtained from weight function method, and fatigue crack growth rates of horizontal and inclined crack are compared.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.6
• /
• pp.49-57
• /
• 2003

This method surely needs a hole that causes local strength and stiffness deterioration of the structure because of stress intensity. In this work, three dimensional stress analysis of pin-loaded joint for quasi-isotropic composite laminates was performed using commercial finite element software. Stress distribution was calculated near the edge of the pin-leaded hole and effects of the stacking sequence on the delamination were investigated. Also, the delamination strength of the composite laminates was predicted using the Ye-delamination failure criterion and compared with the experimental results. finally, newly modified failure criterion has been suggested owing to the consideration of effects of interlaminar normal stress on the delamination strength.

• Composites Research
• /
• v.25 no.2
• /
• pp.40-45
• /
• 2012

The comparison of the numerical results with those measured by the experiment showed good agreement. The design of composite joint which is the weakest part in the composite structures has become a very important research area since the composite materials are widely used in the aircraft and machine structure. In this paper, the new composite key joints that minimize the fiber discontinuity and strength degradation of adherend were proposed and their failure loads were evaluated. The failure index and damage area method were used for the failure prediction of the composite key joint. From the tests, the failure load of the composite key joint was 93% larger than that of a mechanical joint and the key joint whose slot depth and edge length were 0.88mm and 20mm had the largest failure load. Also, the analytic failure modes by the failure index and damage area were compared with experimental failure modes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.117-124
• /
• 2012

In this paper, an analysis of the joint that transmits power from the blades to the generator is performed using the FEM (finite element method). The mode shapes and natural frequencies were extracted using experimental modal analysis in order to establish the FEM model. Then, the model was verified by comparing the mode shapes and natural frequencies to those obtained from the ANSYS modal analysis. Dynamic stress analysis was performed at the rated and limited wind speeds considering the wind load and gravity.

• Composites Research
• /
• v.22 no.2
• /
• pp.7-13
• /
• 2009

With the wide application of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joint have become a very important research area because they are often the weakest areas in composite structures. In this paper, the failure strengths of the hybrid composite joints which were composed of a combination of an adhesive joint and a mechanical joint were evaluated and predicted. The 10 hybrid joint specimens which have different w/d, e/d and adherend thickness were manufactured and tested. The damage zone theory and the failure area index method were used for the failure prediction of the adhesive joint and the mechanical joint, respectively and the hybrid joints were assumed to be failures if either of the two failure criteria was satisfied. From the results of experiments and analyses, the failure strengths of the hybrid joints could be predicted to within 25.5%.