• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.175-180
• /
• 2016

Waste bumpers from out-of-service vehicles are recycled in the manufacturing process of plastic parts by incorporating pristine materials after removing the coated paint on a bumper. This study examined the chemical properties and mechanical properties of a mixture of recycled bumper and pristine materials as a function of the mixing ratio. When the pristine materials and the recycled bumper pieces were mixed, the stiffness (tensile strength and the flexural modulus) was provided by their composition averages. On the other hand, the toughness (Izod impact strength and the elongation-at-break) was lower than their composition averages (i.e., negative deviation). FTIR analysis showed that these results were due to the absence of the compatibility between the pristine materials and recycled bumper pieces. When the recycled bumper pieces were loaded at more than 30 wt. %, the toughness decreased drastically. A previous study showed that a paint removal efficiency up to 80 wt.% was easily attainable. The other 20 wt.% of paint on the bumper is very difficult to remove. Therefore, this study examined the mechanical properties of a mixture of recycled bumper pieces containing the unremoved paint and recycled bumper pieces without paint. When the recycled bumper pieces containing the unremoved paint were incorporated in only small quantities, the mechanical properties were decreased to a great extent. These results show that the paint removal efficiency is very important in the recycled bumper industry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1059-1064
• /
• 2012

In this study, tensile tests were performed on specimens that simulated the cold-bending and heat-treatment of pipe bends to understand the mechanical properties of pipe bends manufactured by cold-bending followed by heat-treatment for relieving residual stress. The strength and ductility of cold-worked materials were respectively found to be higher and lower than those of the parent material although heat-treatment was carried out to relieve residual stress. In addition, the increase in strength and decrease in ductility were proportional to the applied strain levels for cold-working. It was thus inferred that the intrados and extrados regions of pipe bends that were cold-bended and heat-treated show higher strength and lower ductility compared to the parent straight pipe and that the mechanical properties at the crown region are nearly the same as those of the parent straight pipe.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.51-57
• /
• 2010

As a recycling of Si sludge from Si wafer process, a Si-SiC-CuO-C composite material was synthesized and investigated as an anode material for lithium batteries. The Si sludge consisted of Si, SiC, machine oil, and metallic impurities. The oil and metal impurities was removed by organic washing, magnetic separation, and acid washing. The Si-SiC-CuO-C composite from the recovered Si-SiC mixture was prepared by high-energy mechanical milling. According to the electrochemical tests such as charge-discharge capacity and cycling behavior, it showed the improved cycle performance. The SiC and CuO-related phases were presumed to restrain the volume expansion of the anode and Fe, however, should be removed below 10 ppm prior to synthesis of the composite because it caused the capacity loss of the active material itself.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1982-1989
• /
• 1991

The effect of heat treatments were considered on the residual stress fields of AISI 4130 weldments. In experiments, various heat treatments such as preheating, postheating, stress relieve annealing and hardening treatment were carried out for the GTA weldments and the residual stress was measured by using the hole drilling method. The post weld heat treatment at 230.deg.C, which aimed mainly to prevent the possible weld cracking, was found to have only a negligible effect on the welding residual stress distribution, while the annealing treatment at 600.deg.C almost completely removes the residual stress. It was also revealed that the hardening treatment causes no further residual stresses in weldments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.57-62
• /
• 2001

밀링은 회전공구를 사용하여 금속을 제거하는 효율적인 방법으로, 특히 수직밀링은 고능률절삭의 이점 때문에 널리 사용되는 금속절삭 가공방법중의 하나이다. 그러나 밀링커터는 단속절삭 공구로서 절삭 날의 단속절삭작용에 의한 변동절삭력과, 여러 날의 동시가공에 의한 절삭력의 교란 때문에 가공능률, 가공정밀도, 기계와 공구의 수명향상에 문제가 되어 왔다. 이러한 문제점들을 해결하기 위하여 기계설계자들은 절삭력의 교란에 의하여 일어나는 진동을 줄이기 위하여 기계구조의 강성을 증가시켰으나 이석은 고비용을 필요로 하게 되므로 공구 형상을 개선하여 안정된 절삭을 시도하였다.

• Journal of the KSME
• /
• v.32 no.2
• /
• pp.184-193
• /
• 1992

현재의 3차원 측정기 중에서 CNC 3차원 측정기, 3차원 측정기의 데이터 처리장치 및 측정용 센서에 대해서 알아보았다 3차원 측정기는 공작기계와 많은 관계가 있지만 로봇, CAD/CAM 과도 밀접한 관계를 지니고 있다. 또한 3차원 측정기는 센서와도 밀접한 관계가 있다. 앞으로 더욱 바람직한 것은 3차원 형상의 고속연속측정이 가능하게 하는 것, 접촉점의 위치좌표가 고 정도로 구해지는 것 마찰력을 제거할 수 있는 것, 소형, 경량화 등을 열거할 수 있겠다. 한편, 비접촉 센서로서는 광학적 방법을 이용한 센서가 많이 개발되어지고 있지만 표면거칠기, 표면 반사율, 경사각 등의 영향을 받기 쉽기 때문에 고정도의 3차원 측정에 있어서 아직 많은 문제가 남아 있다. 앞으로도 이 같은 많은 문제점을 해결할 수 있는 연구가 계속 진전되기를 바란다

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.363-366
• /
• 2012

본 연구에서 NaOH, Acetic acid, Silane 처리는 천연섬유와 matrix간의 계면 결합에 불리하게 작용하는 wax, lignin, hemicellose 등을 제거하기 위한 방법 중의 하나이다. 이러한 화학적 처리에 따른 왕겨 분말의 기계적 특성 변화를 관찰하였다. Scaning electron microscopy(SEM)으로 관찰한 표면의 상태가 NaOH, Acetic acid, Silane 처리를 하였던 왕겨 분말이 처리를 하지 않았던 왕겨 분말보다 비교적 깨끗해지고, 크랙이 발생함을 확인하였다. 또한 전처리가 된 상태에서 PP와 20, 30, 40%의 비율로 복합재를 제조하여 Universal Testing Machine(UTM)으로 인장강도, 굴곡강도, 굴곡탄성률을 측정하였다. 또한, 왕겨의 입도 사이즈에 따라서 어떻게 변화되는지 알아보았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1572-1581
• /
• 1993

DFSM(Deterministic Finite State Machine) is used because it easily represents the control flow of a protocol in the protocol specification. Real protocols contain problem of nondeterminisms that have more than one enabled transition in the same state by same input. But DFSM does not process nondeterminism. So, in this paper, we first specify a protocol with NFSM (Nonderministic FSM) that may show the characteristics of nondeterminism, and propose an algorithm which converts NFSM to DFSM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.197.2-197.2
• /
• 2014

그래핀(graphene)의 라만 스펙트럼은 전하밀도(charge density)와 기계적 변형(strain)에 민감하여 연구에 널리 활용되고 있다. 본 연구에서는 기계적 박리법으로 만든 그래핀에 황산 수용액으로 p-형 화학도핑(chemical doping)을 유발시키고 전하밀도의 변이에 따른 라만 스펙트럼의 변화를 조사하였다. 이러한 변화를 통해 황산과 물 분자의 계면 확산을 이해하고, $SiO_2/Si$ 기판의 화학적 특성이 미치는 영향을 파악하고자 하였다. 분자의 효율적인 계면 확산을 위해 고온 산화반응을 이용하여 그래핀의 기저면에 나노공(nanopore)을 만든 후, 액상에서 라만 스펙트럼을 측정하였다. 증류수 속에 담궜을 때 물 분자가 그래핀-기판 계면 사이로 확산되면서 열처리에 의해 유발된 정공이 사라짐을 확인하고, D-봉우리의 가역적인 변화로부터 그래핀의 구조적 변화를 유추하였다. 황산 농도를 증가시켰을 때 G와 2D-봉우리의 진동수가 상호간에 일정한 비율로 증가하여 정공의 밀도가 증가함 알 수 있었다. 동일한 시료에 대해 황산의 농도를 감소시킴으로써 p-형 도핑을 제거하고 동일한 반응을 가역적으로 반복할 수 있었다. 상기한 분자의 2차원 확산 현상은 나노공의 유무와 기판의 전처리 조건에 따라 크게 달라진다는 사실을 확인 할 수 있었다. 또한 여러 파장에서 측정된 전하밀도와 기계적 변형에 의한 G와 2D-봉우리의 진동수 변화로부터 다른 연구자들이 활용할 수 있는 검정곡선을 제시하였다.

• Resources Recycling
• /
• v.10 no.2
• /
• pp.34-40
• /
• 2001

Post-consumer dairy HIPS bottles were gathered and recycled by the following processes; crushing into flakes, chemical treatment for the purpose of elimination aluminium caps, washing, and separation from other plastics, such as PP, PE, plasticized PVC These HIPS flakes were extruded into the chips using a single screw extruder. Recyclate HIPS chips were mixed with fly ash as an additive in the range of 5-50 wt%, which were formed from coal power plant. Recyclate HIPS chips mixed with fly ash were molded to investigate thermal and mechanical properties. Their samples, thermal and mechanical properties were measured via DSC, TGA, UTM, and impact strength analysis. The probable mechanical properties exhibited the range of 5∼30% fly ash contents for their applications.