• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.567-578
• /
• 2001

To investigate the difference of Texture exhibited on interproximal enamel surface with each different stripping method and the susceptibility of proximal enamel to demineralization after stripping and the application of a topical fluoride go] and sealant, one hundred human premolars, which were Previously extracted for orthodontic reasons were evaluated by means of Scanning electron microscopy and laser fluorescence. The results were as follows : 1. No matter what the initial stripping instrument was the furrows that resulted from all the stripping methods were not completely removed by careful polishing. 2. Among the enamel surfaces that were treated with three different initial abrasive instruments, followed by the same polishing method (Sof-$Lex^{(r)}$ disks), the enamel surfaces that were treated with 700 crosscut carbide bur showed the smoothest surfaces. 3. The stripped teeth, no matter what the initial stripping instrument was, were less resistant to initial demineralization than untreated teeth. But no difference in caries susceptibility according to differently stripped methods was found (p<(0.001). 4. Teeth treated with APF-gel or sealant were mote resistant to demineralization than those treated without other treatment after stripping (p<0.001). 5. Comparing groups treated with APF-gel to groups treated with sealant, the former was more resistant to demineralization than the tatter (p<0.05). In conclusion, enamel surfaces that were stripped jnterproximally were less resistant to demineralization even though various attempts were made to produce smooth, self-cleaning enamel surfaces. Therefore, additional treatment-sealant or calcifying/ fluoridating solution To the stripped enamel surfaces is recommended.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.483-490
• /
• 1999

Interdental enamel stripping is an usual method for correction of abnormal tooth shape and tooth size discrepancy which is one of the etiologic factors of malocclusion. Clinically it Is useful to correct the minor crowding in anterior teeth and posterior occlusion during finishing stage of orthodontic treatment. But this procedure has risks such as irreversible tooth reduction and remaining roughness of enamel surface can accumulate plaque which can evoke periodontal problem. Even if various methods were introduced to minimize the enamel surface roughness, their evaluation was limited in morphologic differences by scanning electronic microscope(SEM). The purpose of this study was to compare the various interdental enamel stripping method by SEM and to quantify the difference of surface roughness by use of Surfcorder SEF-30D(Kosaka Lab. Ltd.) which can measure the roughness of surface. The stripping methods were divided into mechanical and mechanical-chemical method. Air-rotor stripping and separating strip were used for mechanical stripping and $37\%$ phosphoric acid was used for chemical stripping. The enamel surface roughness after mechanical or mechanical-chemical stripping of interproximal surfaces of premolars which were extracted for orthodontic purpose were measured and compared by means of SEM and $Surfcorder^{\circledR}$, the results were as follows. 1. Enamel surface of primary treated by coarse diamond bur and separating strip groups showed highest value of roughness. 2. To compare the primary treated groups between mechanical and mechanical-chemical method, the latter group showed lower value of roughness remarkably. 3. Mechanical stripping groups which were treated both coarse and fine instrument showed lower value of roughness as much as non treated group. 4. The use of Pumice for final polishing did not show significantly smoothening the stripped enamel surface any more.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.164-173
• /
• 2005

Mechanical preparation has been introduced to provide the sealant retention. The objective of this study was to compare the fissure penetration and the microleakage of pit and fissure sealant using mechanical preparation(mechanical preparation + acid etching) and acid etching only. An additional objective of this study was to compare the fissure penetration and the microleakage of unfilled and filled sealant in both methods. Sixty human premolars extracted for orthodontic purpose were selected. Thirty teeth were acid etched alone and remaining thirty teeth were prepared with a $\frac{1}{4}$ round bur and then acid etched. One-half of teeth in each surface treatment method were sealed with unfilled sealant and the other half were sealed with filled sealant. All of the teeth were thermocycled for 1200 cycles at $5^{\circ}C\;and\;55^{\circ}C$ and immersed in 5% methylene blue for 24 hours. Each tooth was sectioned bucco-lingually at mesial pit and distal pit and examined under a Measurescope. In the case of mechanical preparation, fissure penetration of sealant was significantly increased compared with the case of acid etching only(P < 0.05). The filled and unfilled sealant using mechanical preparation showed significantly decreased microleakage when compared with the unfilled sealant using acid etching only(P < 0.05). No differences were found in fissure penetration and microleakage between unfilled and filled sealant in both methods. Taken together, the results of this study suggest that mechanical preparation and filled sealant are recommended when placing pit and fissure sealant. However, further clinical studies should be performed in regard to microleakage.

• Journal of the KSME
• /
• v.18 no.4
• /
• pp.35-40
• /
• 1978

여기서 상기 ASME Code에 대하여 간단히 설명하기로 한다. ASME Code 는 첫부분에서 ASME Code의 적용을 받아야 하는 압력용기를 정의하고, 압력용기의 건설에 관한 일반원칙을 설명한후 그 다음에는 세개의 Subsection으로 나뉘어져 있다. 즉 Subsection A General Requirements Subsection B Requirements Pertaining to Methods of Fabrication of Pressure Vessels Subsection C Requirements Pertaining to Classes of Material 여기서 Subsection A는 압력용기 재료나 제작방법의 상위와 관계없이 적용하여야 할 일반적인 요구사항을 규정한 것이며, Subsedction B에서는 압력용기의 제작방법을 용접,리벳팅,단조,경납 땜의 4가지로 나누어 각 제작방법에 따른 특수 요구사항을 규정하였고, 마지막으로 Subsection C 는 재료에 따른 특수 요구사항을 규정한 것이다. 이 각 Subsection은 다시 General, Materials, Design, Fabrication, Inspection and Tests, Stamping and Reports, Pressure Relief Devices로 나누어 이에 대한 각각의 요구사항들을 설명하고 있다. 그러나 이 기술기준에서는 제정방향으로, 다음의 목차에서도 알 수 있는 바와 같이 이들의 순서를 바꾸어 총칙,재료,설계,제작, 검사 및 시험, 압력릴리프장치를 배치한 후 이미 KS B 6231에 제정되어 있는 것은 그 규정을 대부분 그 대로 인용하였고, 그렇지않은 것은 우리의 실정을 참작하여 삭제, 보완, 수정하였다. 삭제한 내용 중 대표적인 것으로 공인검사관(Authorized Inspector) 및 Stamping and Reports 에는 9개의 Mandatory Appendix 와 16개의 Nonmandatory Appendix가 있는데, 이둘 중 이 기술기준에서 필요하다고 생각되는 것은 발췌 수록하였다. 단위에 대해서는 국가시책에 따라 메트릭 시스템을 사용하였고 단위의 환산에서 야기되는 소수점등의 처리는 공학적인 판단에 의거하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.597-605
• /
• 2006

It is introduced that pit and fissure sealant is the most universal and effective to prevent occlusal dental caries. In processing of being applied the pit and fissure sealant, the various kinds of methods are developed to remove organic matters, plaque, microflora and debris in the pit and fissure for increasing the rates of maintain the sealant. Recently, the Er:YAG laser has been used as a new enamel surface treatment method. The purpose of this thesis is compared whether that enamel surface treatment method is superior to other methods or not. 1. 100mJ 5Hz Er:YAG lased enamel surface was similar to acid-etched enamel in SEM evaluation. 2, Mechanical preparation showed decreased microleakage when compared with acid-etching only, but no significant differences in both method. 3. After laser and acid-etching method showed decreased microleakage when compared with acid-etching only.

• Annual Conference on Human and Language Technology
• /
• 2020.10a
• /
• pp.179-183
• /
• 2020

말뭉치는 기계학습 및 심층학습을 위한 필수 자원이다. 한국어 개체명의 경우 학습에 사용할 잘 정제된 개체명 부착 말뭉치가 충분하지 않다. 말뭉치 정제 작업은 시간적, 경제적으로 많은 비용이 소모된다. 따라서 본 논문에서는 적은 양의 말뭉치를 이용하여 말뭉치를 자동적으로 확장하는 방법을 제안한다. 특별히 소규모 말뭉치에 속하는 문장의 단어에 대한 형제어들을 선정하여 형제어의 확률추출을 기반으로 대체함으로써 새로운 문장을 생성함으로써 말뭉치 확장하는 방법이다. 본 논문에서는 확장된 말뭉치를 이용해서 대부분의 시스템에서 성능이 향상됨을 확인할 수 있었다. 앞으로 단어의 삭제 및 삽입 등 다양한 방법으로 좀 더 다양한 문장을 생성할 수 있을 것으로 생각합니다.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2002.05a
• /
• pp.35-39
• /
• 2002

광고성 메일이 개인 당 하루 평균 10통 내외로 오며, 그 제목만으로는 광고메일을 효율적으로 제거하기 어려운 현실이다. 이러한 어려움은 주로 광고 제목을 교묘히 인사말이나 답신처럼 변경하는 데에서 오는 것이며, 이처럼 제목으로 광고를 삭제할 수 없도록 은폐하는 노력은 계속될 추세이다. 그래서 제목을 통한 변화에 적응하면서, 제목뿐만 아니라 내용에 대한 의미 파악을 자동으로 수행하여 스팸 메일을 차단하는 방법이 필요하다. 본 연구에서는 정상 메일과 스팸 메일의 범주화(classification) 방식으로 접근하였다. 이러한 범주화 방식에 대한 기준을 자동으로 알기 위해서는 사람처럼 문장 해독을 통한 의미파악이 필요하지만, 기계가 문장 해독을 통해서 의미파악을 하는 비용이 막대하므로, 의미파악을 단어수준 등에서 효율적으로 대신하는 text mining과 web contents mining 기법들에 대한 적용 및 비교 연구를 수행하였다. 약 500 통에 달하는 광고메일을 표본으로 하였으며, 정상적인 편지군(500 통)에 대해서 동일한 기법을 적용시켜 false alarm도 측정하였다. 비교 연구 결과에 의하면, 메일 패턴의 가변성이 너무 커서 wrapper generation 방법으로는 해결하기 힘들었고, association rule analysis와 link analysis 기법이 보다 우수한 것으로 평가되었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.299-303
• /
• 2004

The conventional drilling method of caries removal makes vibration and thermal stimuli, so that children are afraid of dental treatment. Recently, various non-invasive caries removal techniques of alternatives to traditional methods are introduced and chemo-mechanical caries removal is one of them. $Carisolv^{TM}$ comprises a gel that is composed of three different amino acids and a low concentration of sodium hypochlorite and specially-designed hand instruments. This report describes two cases of dental caries treatment with $Carisolv^{TM}$. The carious dentin was eliminated with $Carisolv^{TM}$ gel with instruments and then composite resin restoration was conducted.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Annual Conference on Human and Language Technology
• /
• 2020.10a
• /
• pp.249-253
• /
• 2020

상호참조해결은 문서 내에 등장하는 모든 멘션 중에서 같은 의미를 갖는 대상(개체)들을 하나의 집합으로 묶어주는 자연어처리 태스크이다. 한국어 상호참조해결의 학습 데이터는 영어권에 비해 적은 양이다. 데이터 증강 기법은 부족한 학습 데이터를 증강하여 기계학습 기반 모델의 성능을 향상시킬 수 있는 방법 중 하나이며, 주로 규칙 기반 데이터 증강 기법이 연구되고 있다. 그러나 규칙 기반으로 데이터를 증강하게 될 경우 규칙 조건을 만족하지 못했을 때 데이터 증강이 힘들다는 문제점과 임의로 단어를 변경 혹은 삭제하는 과정에서 문맥에 영향을 주는 문제점이 발생할 수 있다. 따라서 본 논문에서는 BERT의 MLM(Masked Language Model)을 이용하여 기존 규칙기반 데이터 증강 기법의 문제점을 해결하고 한국어 상호참조해결 데이터를 증강하는 방법을 소개한다. 실험 결과, ETRI 질의응답 도메인 상호참조해결 데이터에서 CoNLL F1 1.39% (TEST) 성능 향상을 보였다.