• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.2
• /
• pp.179-184
• /
• 2018

Resin infiltration has been used as a treatment option for the management of early caries lesions recently. However, the etching procedure with hydrochloric acid might be somewhat stressful for the clinicians due to safety problem especially for young children, leading to less utility. This study aims at searching for some alternative surface pretreatment methods of resin infiltration for the early caries lesions in primary anterior teeth by comparing penetration depth of various methods. No significant difference was found in penetration ratio between etched surface with 15% hydrochloric acid and 35% phosphoric acid. However, the penetration ratio was significantly higher in groups pretreated either with dental pumice or abrasive metal strip (p < .05). By the result of this study, etching with phosphoric acid as an alternative of hydrochloric acid was thought clinically acceptable as a pretreatment method for resin infiltration in early caries lesions for primary anterior teeth. It was notable that surface conditioning with dental pumice or metal strip before etching was effective in increasing the penetration. This procedural modification might be much more correspondent with minimally invasive concept and hopefully contribute to increased safety and utility in pediatric dentistry.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.19-26
• /
• 2021

In this study, analysis was performed to identify three greenhouses located in the same area using principal component analysis (PCA) and linear discrimination analysis (LDA). The environmental data in the greenhouse were from 3 farms in the same area, and the values collected at 1 hour intervals for a total of 4 weeks from April 1 to April 28 were used. Before analyzing the data, it was pre-processed to normalize the data, and the analysis was performed by dividing it into 80% of the training data and 20% of the test data. As a result of PCA and LDA analysis, it was found that PCA classification accuracy was 57.51% and LDA classification was 67.06%, indicating that it can be classified by greenhouse. Based on the farmhouse data classified in advance, the data of the new environment can be classified into specific groups to determine the tendency of the data. Such data is judged to be a way to increase the utilization of data by facilitating identification.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.457-463
• /
• 2002

이 연구는 x-선 투과영상을 이용하여 홍삼의 내공을 검출하기 위하여 수행되었다. 이를 위하여 x-선관에 조사되는 x-ray 양의 차이에 따른 위치별 밝기 값 차이를 보정하고 내공 검출에 적합한 영상처리 알고리즘을 개발하였다. 주요연구 결과를 요약하면 다음과 같다. 1) x-선관에 조사되는 x-ray양은 중심에서 가장자리로 갈수록 감소하며, 이것은 위치에 따른 gray 값의 분포가 달라지게 되는 원인이 되었다. 2) 홍삼을 2치화 하기 위해서는 동일한 x-선 조사강도에서 입력된 원 영상에서 빈 영상을 뺀 감산 영상을 만들어 줌으로써 가능하였다. 3) 조사강도 별 감산영상처리 결과 36kV/4.15mA와 39kV/4.15mA에서는 조사량이 많아서 홈삼 지근 부분의 영상이 손실되는 경우가 발생하였다. 4) 내공 검출을 위해서는 정상부분과 내공부분의 자기 값 차이를 크게 하는 전처리 영상을 만들 필요가 있었고, multiple 감산영상에서 뚜렷한 골짜기가 나타났으나 주근의 내공부분의 밝기값 보다 지근의 정상부분의 자기 값이 더 낮게 나타나 이를 보정하기 위하여 홍삼 위치에 따라 부분 보정된 알고리즘을 개발하였다. 5) x-선관의 놓인 위치에 따라서 내공판정시험 결과 중심에 있을 때에 비해 가장자리에 있을 때는 영상이 일부 손실되었으며, 중심 위치에서 서로 다른 굵기의 홍삼에 대해서는 모두 양호한 결과가 나타났다. 6) 완전한 홈삼으로 내공판정시험 결과 내공주위의 정상부분가지도 일부 내공으로 잘못 검출되었으나 이것을 재차 line profile에 의해 한 라인씩 문턱 값을 설정하여 내공만을 정확하게 판정하는 알고리즘을 개발하였다.양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.258-263
• /
• 2022

This experiment was conducted to confirm the possibility of manufacturing artificial Italian ryegrass hay using far-infrared rays in Korea. The machine used in this experiment was a far-infrared ray dryer capable of adjusting temperature, airflow, and far-infrared radiation, and was conducted on Italian ryegrass harvested in May. Conditions for drying were performed by selecting a total of nine conditions, and each condition was set to emission rate of 42 to 45%, and the internal temperature was set to 65℃. The speed of the air flow in the machine was 40-60 m/s, and the overall drying time was 30 minutes for 42% radiation, 25 minutes for 43% radiation, and 20 minutes for 45% radiation. The final dry matter content according to each drying condition was 88.5% on average, and the dry matter content suitable for hay was shown in the all treatment. Looking at the power consumption according to the drying conditions, the lowest was found in the treatment that dried for 20 minutes at 45% radiation. In the drying rate, there was no difference in drying conditions 1 to 5, but a significantly low tendency was shown in conditions 6 to 7. In terms of feed value, CP and IVDMD were higher than raw materials in most drying conditions, and ADF and NDF contents were low, and tended to be high in drying conditions 4, 7, and 8. Through the above results, it was judged that drying conditions 7 and 8 were the most advantageous when considering drying speed, power consumption, and quality.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.3
• /
• pp.77-86
• /
• 2010

In this study, the model of the indirect wind suction waste sorting machine for characteristics of the screening of waste was studied using computational fluid dynamics and the drag coefficient for the model and the suction wind speed were obtained. The wind separator are developing by installing a cyclone air outlet to the suction blower impeller waste is selective in a way that does not pass the features and characteristics of the inlet pipe of the pressure loss and separation efficiency can have a significant impact on. Using Wind separator for selection of waste in the waste prior research on the aerodynamic properties are essential. For plastic cases, it is reasonable to take the drag coefficient between 0.8 and 1.0, and for cans, compression depending on whether the cans, the drag coefficient is in the range from 0.2 to 0.7. The separation efficiency of waste as change suction speed was the highest efficiency when the suction speed was 25~26 m/s. Shape of the inlet, depending on how the transfer pipe of the duct pressure loss occurs because the inlet velocity changes through the appropriate design standards to allow for continued research is needed.