• Membrane Journal
• /
• v.33 no.3
• /
• pp.137-147
• /
• 2023

In this study, Br-PPO was developed by applying additive organic particles through a suspension polymerization synthesis method. The anion exchange membrane fuel cell system performance was evaluated using it to an anion exchange membrane. To improve the performance, organic ion exchange particles were prepared and added to the anion exchange membrane. Chemical structure analysis and synthesis were determined through FT-IR and NMR, and tensile strength and thermal stability were measured through TGA and UTM to determine whether it could be driven. Before the anion exchange membrane fuel cell test, the performance was evaluated by measuring the ion conductivity and ion exchange capacity. Finally, the Br-PPO-TMA-SDV (0.7%) anion exchange membrane with excellent ion conductivity and ion exchange capacity was introduced into the fuel cell system. Its performance was compared with FAA-3-50, a commercial membrane, to determine whether it could be introduced into a fuel cell system.

• Journal of Powder Materials
• /
• v.30 no.5
• /
• pp.409-414
• /
• 2023

YSZ (Y₂O₃-stabilized zirconia)-based ceramics have excellent mechanical properties, such as high strength and wear resistance. In the application, YSZ is utilized in the bead mill, a fine-grinding process. YSZ-based parts, such as the rotor and pin, can be easily damaged by continuous application with high rpm in the bead mill process. In that case, adding WC particles improves the tribological and mechanical properties. YSZ-30 vol.% WC composite ceramics are manufactured via hot pressing under different pressures (10/30/60 MPa). The hot-pressed composite ceramics measure the physical properties, such as porosity and bulk density values. In addition, the phase formation of these composite ceramics is analyzed and discussed with those of physical properties. For the increased applied pressure of hot pressing, the tetragonality of YSZ and the crystallinity of WC are enhanced. The mechanical properties indicate an improved tendency with the increase in the applied pressure of hot pressing.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.

• Journal of the Korean Society of Radiology
• /
• v.81 no.1
• /
• pp.101-118
• /
• 2020

Voiding cystourethrography (VCUG) demonstrates the anatomy of the urinary system and is used to detect the presence/absence of vesicoureteral reflux. It is the most important modality for urological fluoroscopic examination in children. For improved patient care, it is important to understand and perform VCUG appropriately. Therefore, an in-depth review of VCUG protocols and techniques has been presented herein. In addition, tips, tricks, and pitfalls associated with the technique have also been addressed.

• Membrane Journal
• /
• v.34 no.4
• /
• pp.216-223
• /
• 2024

In comparison to commonly employed polypropylene (PP) material, polymethylpentene (PMP) exhibits low surface energy and reduced crystallinity, allowing fabrication of asymmetric membranes with a dense skin layer. However, its higher melting point poses significant challenges with respect to polymer processability. In this work, we utilized the N-TIPS method, which combines the advantages of non-solvent induced phase separation (NIPS) and thermally induced phase separation (TIPS), to fabricate PMP membranes. Cyclohexane was employed as the solvent for preparing the PMP dope solution, while water, ethanol (EtOH), and isopropanol (IPA) were used as nonsolvents. When cyclohexane-immiscible water was used as the nonsolvent, the resulting membrane exhibited TIPS morphology with unifrom pore structure but lacked suface uniformity. In contrast, when cyclohexane-miscible alcohols (EtOH, IPA) were employed, the membranes displayed NIPS morphology with a dense skin layer with higher mechanical strength. Furthermore, the effect of polyethylene glycol (PEG) as a pore forming agent was investigated to better control the surface pore size.

• Culinary science and hospitality research
• /
• v.18 no.3
• /
• pp.163-179
• /
• 2012

This study was prepared to develop American sauce with different amounts of salt through high pressure extraction and examined difference in its mechanical and sensory characteristics. Furthermore, it aimed to provide practical materials for the mass production of American sauce and other crustacean sauce products and to contribute to the development of products with superior quality and functionality by standardizing traditional cooking techniques in the food service industry. In American sauce, salt content did not have a significant effect on water content and ash content but had a significant effect on color, pH and salinity. Na and K contents increased with increasing salt content. In addition, Mg and P contents were highest in J4 containing 0.4% of salt, but they did not show any regular tendency according to salt content. For total free amino acids, 29 kinds were detected in J0 and J1, 30 in J2, 31 in J3, and 33 in J4. Detection was highest in J3 containing 0.3% of salt, and the content level was highest particularly for arginine among essential amino acids, for glutamic acid, alanine, serine, ${\beta}$-alanine and ${\alpha}$-aminoadipic acid among flavor enhancing amino acids, and for ${\gamma}$-Aminoisobutyric acid among other amino acids. We measured lipid peroxidation in American sauce using lipid extracted from a mouse brain and confirmed that the amount of antioxidant substances extracted was largest in J0 containing no salt. The results of measuring lipid peroxidation and DPPH showed that the antioxidant effect was high when salt was not contained. In the results of the sensory test, overall quality was highest in J3 containing 0.3% of salt, showing that the addition of salt affects the evaluation of overall quality. Summing up the presents of this study as presented above, we cannot expect an effect of antioxidant functionality; however, according to the results of the mechanical quality evaluation and the sensory test, American sauce containing 0.3% of salt is considered the optimal product in terms of quality. Using these results as practical materials for the mass production of crustacean sauce products, we expect to standardize traditional cooking techniques in the food service industry and to develop products with high quality and functionality.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.185-189
• /
• 2007

Animals must be inspected prior to and after slaughter to make certain they are free of diseases and unacceptable defects. Since meats are potentially hazardous foods, they should not be accept if there are any signs of contamination, temperature abuse, or spoilage. This survey was aimed to monitor the current situation of country-of-origin labels and sanitation for the meat markets in Seoul, Korea. The markets were divided into groups as to 25 territories in Seoul and the size of markets (large size, medium size, and small size). In terms of size distribution, small butcher shops occupied the highest percentage. On the itemized suitability test of unpacked and packed beer in Seoul, most butcher shops showed good evaluation. However, labels indicating the grade, storage and cooking instruction for unpacked beef were not properly posted on the products. The results of monitoring sanitation conditions for butcher shops in Seoul showed relatively low suitability. Especially, there were serious lack of knowledge about wearing the sanitation clothings, caps, and shoes. The problem with food safety is so complicated that producers, consumers, merchandisers, the press, the government and the scholar should try to solve the problems altogether. Also, it is important to educate and provide them with correct understanding and information for food hygiene and safety.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.284-288
• /
• 2001

Respiratory viruses are one of the most infectious agent in human. Six different respiratory tract viruses were detected from Busan while working on the preventive surveillance in 1997-2000. The isolation rate from suspected specimens were 8.4%. Influenza virus A, B type, parainfluenza virus, adenovirus, mumps virus, and measles virus were examined from throat swabs, serum, and secretions of patients. Influenza A/Sydney/05/97(H3N2)-like, A/Johanesburg/33/94(H3N2)-like, A/Beijing/262/95(H1N1)-like and Influenza B/Beijing/262/95-like, B/Harbin/07/94-like, B/Guangdong/08/93-like were found. Adenovirus serotype 1, 2, 3 and 5 were detected, antibody of mumps both IgM and IgG were shown and outbreaks of measles were confirmed. Different antigenic types of influenza virus were detected every year, one outbreak of parainfluenza in 1999, mumps outbreak in 1999 and 2000, and incidence of measles in 2000 were noticeable. Monthly outbreaks were November through following March with influenza virus, January through June with adenovirus, February through May and December with mumps, April through August and November, December with measles, respectively. The size of isolated viruses were 130 nm with influenza virus B type, non-enveloped, icosahedron with 70 nm with adenovirus, 170 nm with mumps virus and 180 nm with parainfluenza virus in diameter, respectively.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.35-44
• /
• 2008

Mycelial growth of Lentinula edodes on solid or liquid culture media supplemented with differentconcentrations of oak wood vinegar varied depending on the types of wood vinegar or mushroom varieties used.Oak wood vinegar obtained from traditionally carbonizing kiln (TWV) inhibited mycelial growth of L. edodes atthe dilution level of less than $5{\times}10^{-2}$, but stimulated at $10^{-3}$ to $2{\times}10^{-3}$. Wood vinegar from mechanicallycarbonizing kiln (MWV) inhibited at $10^{-3}$, but stimulated at $2{\times}10^{-3}$. In liquid culture media, both wood vinegarinhibited at $5{\times}10^{-2}$, but stimulated at $2{\times}10^{-3}$. Sanjo-302-ho grown in liquid culture media at $2{\times}10^{-3}$, and Sanrim 2and 3-ho grown at $4{\times}10^{-3}$ showed relatively high degree of wood decay (DWD) and growing ability within wood(GAWW) when these isolates were inoculated onto oak wood logs. TWV completely inhibited mycelial growth ofgreen mold fungi, Trichoderma species, tested at $5{\times}10^{-1}$ dilution level, while MWV inhibited at $5{\times}10^{-1}$ to $5{\times}10^{-2}$dilution level. For Diatrype stigma, TWV inhibited mycelial growth at the dilution level of less than $5{\times}10^{-2}$, whileMWV did 80% of mycelial growth at $10^{-2}$, and 100% at $5{\times}10^{-1}$ dilution level. Fresh and dry weight of fruitingbodies harvested after soaking of wood logs into wood vinegar solutions with different concentrations werecompared, and were the highest at $2.5{\times}10^{-2}$ dilution level. Storage test of fruiting bodies at $10^{\circ}C$ for 10 daysshowed that fruiting bodies harvested after soaking in the solution with $2.5{\times}10^{-2}$ dilution level showed the bestfreshness by general test and color changes. In addition, shear force value of L. edodes fruiting bodies measuredby using texture analyzer showed that $2.5{\times}10^{-2}$ dilution level was the best concentration for keeping flesh texture.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.1009-1029
• /
• 2023

Urban trees play a vital role in urban ecosystems,significantly reducing impervious surfaces and impacting carbon cycling within the city. Although previous research has demonstrated the efficacy of employing artificial intelligence in conjunction with airborne light detection and ranging (LiDAR) data to generate urban tree information, the availability and cost constraints associated with LiDAR data pose limitations. Consequently, this study employed freely accessible, high-resolution multispectral satellite imagery (i.e., Sentinel-2 data) to estimate fractional tree canopy cover (FTC) within the urban confines of Suwon, South Korea, employing machine learning techniques. This study leveraged a median composite image derived from a time series of Sentinel-2 images. In order to account for the diverse land cover found in urban areas, the model incorporated three types of input variables: average (mean) and standard deviation (std) values within a 30-meter grid from 10 m resolution of optical indices from Sentinel-2, and fractional coverage for distinct land cover classes within 30 m grids from the existing level 3 land cover map. Four schemes with different combinations of input variables were compared. Notably, when all three factors (i.e., mean, std, and fractional cover) were used to consider the variation of landcover in urban areas(Scheme 4, S4), the machine learning model exhibited improved performance compared to using only the mean of optical indices (Scheme 1). Of the various models proposed, the random forest (RF) model with S4 demonstrated the most remarkable performance, achieving R² of 0.8196, and mean absolute error (MAE) of 0.0749, and a root mean squared error (RMSE) of 0.1022. The std variable exhibited the highest impact on model outputs within the heterogeneous land covers based on the variable importance analysis. This trained RF model with S4 was then applied to the entire Suwon region, consistently delivering robust results with an R² of 0.8702, MAE of 0.0873, and RMSE of 0.1335. The FTC estimation method developed in this study is expected to offer advantages for application in various regions, providing fundamental data for a better understanding of carbon dynamics in urban ecosystems in the future.