• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.420-423
• /
• 2000

본 논문은 IMT-2000 기지국용 이중편파 ASSAP(Air-Strip-Air-Patch)형 마이크로스트립 안테나를 설계하였다. 복사소자로는 급전선과 복사부와의 고립도가 좋은 개구 결합형 패치를 이용하였다. $\pm$45$^{\circ}$직교 슬롯을 이용하여 이중편파를 발생시키고 급전선으로는 광대역화를 위한 에어 스트립라인을 이용하였으며 안테나의 복사특성을 만족하기 위해 패치의 크기와 접지면의 크기를 조정하여 Ensemble로 시뮬레이션 하였다. 그 결과 설계 제작한 안테나는 두 개의 포트 모두 전대역에 걸쳐 1.5:1 이하의 VSWR과 -25dB이하의 격리 특성, 그리고 65$^{\circ}$$\pm$ 7$^{\circ}$의 수평범폭을 갖는다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.52-59
• /
• 1996

This paper presents a monopulse feed structure with low sidelobe monopulse pattern, which consists of a E-plane corrugated horn and a unfiorm pick-up aperture power divider. Tfhe design methods and epxerimental resutls of the E-plane corrugated feeder are described. Modified hybrid mode analysis and GSM (generalized scattering matrix) methods are introduced to design the E-plane corrugated feed horns. The 24-port corrugated feeder is designed using modified hybrid mode analysis initially and verified using GSM methods. Measurement results show that this feeder has low return loss and sidelobe level at sum and difference channel, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.50-55
• /
• 2012

Fabry-Perot (FP) resonator antennas with scan capabilities are described in this paper. The proposed antennas, excited by a thinned array, not only achieve higher directivities but also improve suppression of sidelobes relative to that of the thin array alone. Compared to the conventional microstrip patch array, the directivity enhancement and suppression of sidelobe level were achieved by increase of the aperture size of the proposed Fabry-Perot resonator antenna.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.113-121
• /
• 2003

In this paper, the transmit antenna for the space feeder used for the phased array antennas is investigated. The multi-aperture horn antenna is proposed as the transmit antenna and the characteristics are verified with the Matlab coding, HFSS of Ansoft Corp., and MWS of CST Corp., The E-plane and H-plane beam patterns of the multi-aperture horn antenna are nearly symmetrical and the sidelobe level of the I-plane beam pattern is lower than that the of general pyramidal horn antenna. The fabricated multi-aperture horn antenna is measured using the near-field measurement system. The measured results show good agreement with the simulated ones.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.39-44
• /
• 1994

A theoretical method has been considered for the analysis of a cylindrical edge-slot antenna which belongs to a class of circumferential slot antennas that are suitable for conformal mounting on conducting bodies of revolution. A coupled integral equation is formulated for unknown magnetic currents of both the coaxial aperture and the edge slot, and solved by the moment method. Theoretical values for reflection coefficient obtained based upon the method are compared with our experimental values and other author's results available. There arre good agreement between them.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.289-290
• /
• 2011

일반적으로 사용되는 변압기에 비해 공진형 컨버터의 변압기와 유도급전 시스템에 사용되는 비접촉 변압기의 경우 공극이 아주 크다. 이런 경우, 일반적인 측정 방법으로는 정확한 변압기의 변수를 얻을 수 없다. 하지만 coupled 인덕터 측정 방법을 이용하여 공극이 큰 변압기의 변수를 측정하면 일반적인 변압기 측정 방법에 비해 정확한 변압기 변수를 얻을 수 있다. 그러므로 본 논문에서는 공진탱크를 구현하여 PSpice 시뮬레이션과 임피던스 분석기(PSM1735)의 결과를 비교하여 2가지 측정 방법 중 coupled 인덕터 측정 방법이 정확하게 측정 가능함을 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.867-873
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. The fabricated antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.73-79
• /
• 2015

Enhanced bandwidths of the GPS microstrip patch antennas applied by a Wilkinson power divider and a quadrature hybrid were compared. The square patch was designed, and fed by the two port probes for the circuit application. The Wilkinson power divider and quadrature hybrid circuit were designed, and applied to the patch antenna. The designed patch and two circuits were implemented on the FR4 board, and combined together. The measurement of the bandwidth within a voltage standing wave ratio (VSWR) of 2: 1 were 36.5% (1,200~1,775 MHz) in the case of the Wilkinson power divider and 29.84% (1,230~1,700 MHz) in the case of the quadrature hybrid. Axial ratios (AR) in 3dB were 17.14% bandwidth (1,360~1,630 MHz) and 15.87% bandwidth (1,400~1,650 MHz), respectively. The application of the Wilkinson power divider is wider than that of the quadrature hybrid. The peak gains in the anechoic chamber at the GPS center frequency were measured as 2.84 dBi and 2.75 dBi, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.597-605
• /
• 2015

Negative impedance converter(NIC)-based non-Foster impedance matching is proposed for an electrically small antenna. The antenna considered in this work is a resistively loaded vee dipole(RVD) antenna, which has considerable reflection at the feed point because of its large negative input reactance. The non-Foster matching circuit built near the feed point consists of two-stage NIC circuit and a capacitor connected between the stages. The NIC is realized by using operational amplifiers(op-amps) and resistors. The circuit is designed by considering of the input impedance according to the finite open-loop gain of the practical NICs. The stability test of the impedance-matched RVD antenna is performed. The non- Foster matching circuit is implemented with the RVD antenna. The measured impedance demonstrates that the proposed non-Foster matching circuit effectively reduces the input reactance of the RVD antenna.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.25-32
• /
• 2021

In this paper, the Magneto-Electric(ME) dipole array antenna with dual-polarization in the X-Band is proposed and it is implemented and measured. The proposed array antenna is composed of 32 single ME dipole antenna and a Teflon PCB. 1 × 1 ME dipole antenna is implemented dual-polarization by radiating vertical polarization and horizontal polarization from two pairs of radiators. 2-port feeding structures are realized by lamination process using LTCC. And, each port independently feeds the radiator through a Γ-shaped feeding strip with isolation between ports. The Teflon PCB used in the antenna array has a 4-layer structure, and 2-port is fed through the top and bottom layers. The λ_g/4 transformer is applied to the transmission line of the Teflon PCB for impedance matching of the arrayed antenna and the Teflon PCB, and the optimal parameters are obtained through simulation. The measured maximum antenna gains of port 1 was 18.2 dBi, Cross-pol was 1.0 dBi. And the measured maximum antenna gains of port 1 was 18.1 dBi, Cross-pol was 3.2 dBi.