• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.39-45
• /
• 2017

In this study, permeable repair materials mainly composed of silicate - based inorganic materials(SIM), which are easily available domestically, were prepared as a basic study for the development of permeable repair materials using SIM. SIM were compared and examined for their performance as repair materials by selecting a product group which has many cases of use in foreign countries. The SIM used were mainly composed of sodium, potassium and lithium silicate. Performance evaluation of SIM was performed by absorption and penetration, compression and adhesion, rapid chloride ion penetration, rapid freezing and thawing, and chemical resistance test. According to the test results, SIM showed effective performance in all areas, mainly because SIM permeates into the interior of the capillary and has a dense internal microstructure. Therefore, it can be used variously to improve the durability of concrete based on the results of this experiment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.103-110
• /
• 2019

Damage to the pavement system due to various causes will be required rapid repair work for reopening the vehicle traffic. The magnesium oxide phosphate composite(MPC) has a short curing time and is capable of early compressive strength development, is suitable for rapid repair materials. The aim of this study was to evaluate the hardening and compressive strength characteristics of MPC according to the water-binder (W / B) ratio and magnesium-phosphate(M / P) ratio in order to develop repair materials consisted with light burned magnesia and potassium dihydrogen phosphate. In order to ensure the workability in the field application, the difference of mechanical properties according to standard sand and ordinary sand and performance of retards were evaluated. The mix proportion with W/B ratio was about 35% and the M/P ratio was about 1.0 ~ 1.2 has a superior perfomance with strength and hardening condition. Especially, the strength of composite at only 1 day curing with W/B ratio of 0.35 and the M/P ratio of 1.2 was shown the higher than 25.0 MPa. Boric acid as a retarder was found to be suitable for ensuring the working time, and the purity of magnesium oxide was about 90 ~ 95%, which is effective for ensuring curing time and strength.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.6-8
• /
• 2002

콘크리트는 국내 건설 구조재료에 있어 강재와 더불어 중요한 건설재료로서, 특히 경제발전이 가속화되기 시작한 1960년대 후반 이후 사회간접자본의 확충과 1970 ~ 1980년대의 경제 성장기에 대부분의 구조물 축조에 사용되었다 그러나, 짧은 기간에 걸쳐 많은 구조물을 양산하고 이들을 유지 관리하는 것에 소홀하여 20~30년이 경과한 현 시점에서 설계 및 시공의 부실과 외부 환경의 변화 등에 따라 급속한 노후가 진행되고 있으며 콘크리트 구조체가 적정한 수명을 다하지 못한 채 사용금지 되거나 철거의 대상이 되고 있다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.62-69
• /
• 2023

This study investigated the electromechanical properties of cement based smart repair materials (SRMs) according to the different amounts of fine steel slag aggregates (FSSAs). SRMs can self-diagnose the quality of repairing and self-sense the damage of repaired zone. The replacement ratios of FSSAs to sand for SRMs were 0% (FSSA00), 25% (FSSA25), and 50% (FSSA50) by sand weight. The electrical resistivity of SRMs generally decreased as the compressive stress of SRMs increased: the electrical resistivity of FSSA25 at the age of 7 hours decreased from 78.16 to 63.68 kΩ-cm as the compressive stress increased from 0 to 22.37 MPa. As the replacement ratio of FSSAs by weight of sand increased from 0% to 25%, the stress sensitivity coefficient (SSC) of SRM at the age of 7 h increased from 0.471 to 0.828 %/MPa owing to the increased number of partially conductive paths in the SRMs. However, as the replacement ratio of FSSAs further increased up to 50%, the SSC decreased from 0.828 to 0.649 %/MPa because some of the partially conductive paths changed to continued conductive ones. SRMs are expected to self-sense the quality and future damage of repaired zone only by measuring the electrical resistivity of the repaired zone in addition to fast recovery in the mechanical resistance of structures.

• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.38-52
• /
• 2014

도시주민생활에 없어서는 안 될 주요한 사회간접자본시설인 하수도, 하수도처리시설 등의 콘크리트 구조물에 대한 부식열화는 현재 세계 각국에서 급속히 진행되고 있다. 콘크리트 구조물은 반영구적인 것으로 인식하고 있다. 그러나 각종 열화 인자에 의해 구조물의 사용수명은 급속히 단축된다. 하수시설 내에서는 황산이외에도 다양한 염류에 의하여 콘크리트구조물이 부식될 가능성이 있지만 황산에 의한 부식이 가장 대상범위가 넓고 부식속도가 빠르기 때문에 부식현상이 발견되면 급속하고 적절한 대응조치가 필요하다. 열화예측결과 및 구조물의 공용연수를 감안한 신뢰성이 높은 공법의 도입이 필요하며 이러한 조건에 적합한 유기재료와 무기재료의 복합 특성을 발휘하는 갱생공법에 사용되는 주요 소재의 실험적 특성에 관하여 고찰하였다. 그 결과 경질염화비닐(이하 프로파일)은 내외수압 저항성에서 3분간 $1kgf/cm^2$의 압력에도 누수 및 압력의 이동이 없었으며 약품침지에 따른 중량변화량이 $0.2mg/cm^2$이하로 산에 대한 변화량은 거의 없었다. 주입재인 모르타르의 산성에 대한 저항성은 일반 콘크리트에 비해 우수하였으며 기존 모르타르에 비해 비확선성 또한 우수하였다. 장거리압송시험은 200m까지 안정적인 압송이 가능하여 이 기술에 필요한 요구 성능을 확보한 것으로 나타났다.

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.157-165
• /
• 1992

전력설비를 비롯하여 모든 생산설비나 공공 기간설비 등의 설계, 운용, 건설은 설비의 목적달성에 충분한 기능을 가지며 가능한 한 저렴하고 효율적으로 이루어져야만 된다. 전력계통 운용상 계획된 송전선은 필요로하는 전력을 발생지점에서부터 소비지점까지 가장 경제적 효율적으로 전송시킬 수 있는 최적설계를 이루어야 한다. 도시미관, 소음 등의 환경과의 조화, 변전소용 부지의 문제, 운전보수나 건설공사비의 저렴화, 안정성, 신뢰성등의 문제를 가스절연기기가 해결할 수 있으므로 최근 가스절연변전소가 급속히 보급되고 있다. 고전압 대전류를 취급하는 초고압송전용 전력기기의 성능향상과 소형경량화, 안전성, 환경조화성 등을 실현시키기 위해서는 양질의 전기절연을 이룩하여야만 한다. 결국 전기절연재료기술이 양질의 전기를 공급할 수 있다고 해도 과언이 아닐 것이다. 즉 초고압전력계통의 구성에 대하여도 절연재료의 성능과 합리적 설계가 기반기술로 대두하게 된다. 따라서 전력계통의 초고압화도 재료기술과 직결되며 현재 우리나라의 실정에서는 특히 취약한 신절연기술에 대하여 보다 심층적인 연구가 수행되어야 될 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.45-50
• /
• 2009

The differential settlement may be generated by the variation of stresses caused by the soft ground or ground water. The cracks are usually created when the structures are leaned or deformed due to the differential settlement. A grouting method has been mainly used till now to improve the bearing capacity of the ground when the foundation of the structure is deformed by differential settlements. However, when this method is used, it takes too long time to obtain the required strength and the period of the reinforcement effect is not long enough. The advantage of GPCON injection method is to have good mechanical properties and durability, and easy construction. In addition, the GPCON method rapidly fills up the void in soils by injecting some materials into underground and also obtain the increase of bearing and shearing forces due to the expansion. In this paper the restoration capability of the foundation settlement of railway and subway subjected to cyclic loading is analytically and experimentally evaluated using the high density rapidly expansion GPCON in order to investigate the types of deformations and vibrational characteristics.

• Tribology and Lubricants
• /
• v.3 no.1
• /
• pp.5-11
• /
• 1987

트라이볼로지는 상대운동을 하면서 서로 영향을 미치는 표면 및 이와 관련된 제반 문제와 실제 응용에 관한 과학과 기술로 정의되고 있다. 이를 산업계에서 익히 사용하고 있는 용어로 풀이하면 마모, 마찰 및 윤활을 기본 주제로 하는 공학이라고 설명되며, 그 결과는 기계 및 장치의 보수유지비 절감, 생산손실 감소, 에너지 소비 절감등의 직접적인 경제적 효과로 나타난다. 기술문명이 급속히 발달함에 따라 재료 소비량 절감 및 에너지 절감은 중요한 과제로 부각되었으며, 특히 산업계에 있어서는 생산단가와 직결되기 때문에 트라이볼로지 기술은 각 나라에서 필수적인 연구과제로 기술개발에 박차를 가하고 있다. 트리아볼로지의 대상이되는 상대 운동을 하는 부분에서는 여러가지 복합적인 현상이 발생하기 때문에 물리, 금속, 화학, 기계등의 공동 다분야 연구를 필요로하게 된다. 여기서는 상대운동 부위에서 나타나는 물리적 현상을 개괄적으로 살펴보고, 이 중 마모방지 대책을 위한 표면처리 기술에 대하여 고찰하고저 한다.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.55-64
• /
• 2009

Recently, concrete track is replacing ballast track for efficient and economic maintenance of track. It considerably offer less maintenance, a longer service life and reduced life-cycle costs. With the aim of achieving high-quality track construction work, of developing tools for quality assurance in new construction and for later technical inspection of material condition, a quality strategy has to be developed. For these purpose, NDT which is using the seismic wave has carried out in situ studies in the test construction section. The used NDT are SASW test, impact echo test and continuous impact echo test. The test is performed 5,353 times on 49 pre-cast concrete track panels to verify the stiffness structure and grouting efficiency of the track structure. To conclude, because of the non-homogeneous characteristic of concrete material. it is restricted to apply the elastic wave test at some aspect. However it is possible to acquisite a sufficient reliability about structural stiffness and grouting efficiency of concrete track.

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.81-88
• /
• 2017

In this paper, the behaviour of composite steel-CFRP members is studied experimentally and using FE-analysis. The use of advance composite materials in construction for repair and rehabilitation has become a frequent used method in the last decade. FRP composites have many advantages over the traditional technique of steel bonding for a number of reasons: 1. Composites add little or no additional weight to a building, eliminating the need for costly foundation strengthening. 2. FRP composites are very thin (1.2mm to 1.4mm). So there is no loss of floor space and negligible effect over the architectural aspect. 3. FRP composites do not corrode, this makes it long lasting. However, the method is yet to become a mainstream application due to a number of economical and design related issues. Brittle debonding failure, aging effect on bonding, broad based awareness and proper design guidelines are the main concern for future research works. This paper is focused on the ultimate load carrying capacity of the CFRP-strengthened beams and their effect on the deflection and failures modes by varying the amount of CFRP content.