• Communications for Statistical Applications and Methods
• /
• v.5 no.2
• /
• pp.327-338
• /
• 1998

이원배치모형에서 급내상관계수에 대한 점 추정문제가 고려된다. 급내 상관계수에 대한 여러 가지 점추정량의 종류를 살펴보고 추정량의 평균자승오차(MSE)과 절대편의를 모의 실험을 통하여 서로 비교하여 본다. 결론적으로 이원배치모형에서의 급내 상관계수는 추정량의 종류에 큰 영향을 받지 않는 것으로 나타났으며, 따라서 계산량이 다른 추정량들에 비하여 적은 헨더슨의 방법 $\textrm{III}$ 추정량을 사용하는 것이 바람직한 것으로 판명되었다.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.245-257
• /
• 2002

The purpose of this study was to develop a simple, valid, and reliable instrument for measuring forward flexion of trunk-hip joint. The subject included 44 females for sports major of volunteers at D. Women's University. In establishing the validity, objectivity the reliability of the new flexibility test(NF-test) for trunk-hip joint, Takei- flexometer(modified Leighton flexometer) was administered as the reference instrument, and test-retest method was utilized with the best scores. Intraclass correlation coefficient was obtained to use two way-mixed effect model and this value was average measure. The Pearson product correlation coefficient of L in this study were; the new flexibility test and Takei-flexometer as the reference tool correlated r = .962 in the first test, r = .960 in the second test. The intraclass correlation coefficient of the new flexibility test between in the initial test and in the retest were R = .994 for L, R =.993 for Y, and the intraclass correlation coefficient of the new flexibility test between L and Y were R =.985 in the initial test, and R =.986 in the retest. Based on the above findings, the following conclusions are presented. It was found the new flexibility test (NF test) was a valid, reliable, objective tool for measuring forward flexion of trunk-hip joint, and possible to be recommended as he test for measuring trunk-hip flexibility in the field.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.433-439
• /
• 2022

Muscle fatigue models to predict maximum endurance time (MET) are broadly classified as either 'empirical' or 'theoretical'. Empirical models are based on fitting experimental data and theoretical models on mathematical representations of physiological process. This paper examines the effectiveness of dynamic muscle fatigue model as theoretical model to predict maximum endurance time during forearm isometric contraction. Forty volunteers (20 females, 20 males) are participated in this study. Empirical models (exponential model and power model) and theoretical model (dynamic muscle fatigue model) are used to compare. Mean absolute deviation (MAD), correlation coefficient (r) and intraclass correlation (ICC) are calculated between theoretical model and empirical models. MAD are below 3.5%p, r and ICC are above 0.93 and 0.87, respectively. This results demonstrate that dynamic muscle fatigue model as theoretical model is valid to predict MET.

• The Journal of Korean Academy of Sensory Integration
• /
• v.20 no.2
• /
• pp.11-21
• /
• 2022

Objective : This study examined the test-retest reliability and interrater reliability of the Sensory Processing Scale for Children (SPS-C). Method : Senventy primary caregivers of children with sensory processing difficulties and 3 years old participated in the study. The subjects were recruited through child development centers, welfare centers, and acquaintances located in Seoul, Gyeonggi-do, Busan, and Gyeongsang-do. The test-retest reliability verification targeted 20 main caregivers of children with difficulty in sensory processing. Re-evaluation was performed within 7 to 14 days after the initial evaluation, and Pearson's correlation coefficient was used to confirm the relevance between the two time points, and the Intraclass correlation coefficient was used to confirm the degree of agreement. The interrater reliability verification was conducted with 18 primary caregivers and 18 subsidiary caregivers of children with sensory processing difficulties. Each caregiver evaluated the same child, and the Intraclass correlation coefficient was used to confirm the agreement between the two sets of caregivers. Results : The test-retest reliability was Pearson's correlation coefficient r=.914 and intraclass correlation coefficient ICC=.939, indicating a high level of relevance and agreement. The interrater reliability was an Intraclass correlation coefficient ICC=.727, which showed a moderate level of agreement, but the tactile area (ICC=.455) and proprioceptive area (ICC=.439) were not statistically significant and showed a low degree of agreement. Conclusion : Through this study, it was confirmed that the children's Sensory Processing Scale for Children (SPS-C) is a stable evaluation tool with test-retest reliability and interrater reliability verified, and it will be able to provide help in standardization studies for future clinical use.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.497-510
• /
• 2010

In medical practice and research, the problem of assessing reliability between two or more quantitative measures is quite common. Intraclass correlation coefficient(ICC) is commonly used to scale of reliability. Some methods were developed to calculate the required number of subjects, raters or replicates in one-way or two-way random ANOVA models. This paper, studies and compares the performance of four methods such as Walter et al. (1998), Giraudeau and Mary (2001), Saito et al. (2006) and Bonett (2002). In order to compare the efficiency of methods we compare the number of subjects, replicates and the width of confidence interval of ICC needed for some specific ICC values. In the case of subject size, Giraudeau's method is the best. In case of the number of replicates, Saito's method was superior to others. The width of confidence interval of ICC was narrower for Giraudeau's method than any others.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.410-418
• /
• 2021

In a program that runs an engineering education certification, program outcomes refer to the knowledge, skills, and attitudes a student must have until graduation. In general, capstone design is used as a tool for evaluating program outcomes. This paper applies the intraclass correlation coefficient (ICC) to measure the raters' reliability in assessing program outcomes. Several raters evaluate program outcomes, and the result is used to obtain the raters' ICC. ICC measures the reliability of ratings or measurements for clusters - data that has been collected as groups or sorted into groups. If the ICC is close to 1, it means that the reliability among the raters is high. We evaluated the proposed method's usefulness through case analysis. As a method for assessing an evaluation tool's objectivity, multiple raters measure the same evaluation tool. As a result, we measured the ICC values for all POs, and analyzed the cause for the low measured POs. We applied this method to evaluate program outcomes of the Department of Computer Engineering in the past two years. As a result, we derived guidelines for improvement and program outcomes.

• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.43-51
• /
• 1996

균형일원변량모형에서 분산성분비율의 점추정에 관한 문제가 고려되어진다. 분산성분비율에 대한 점추정량의 종류를 살펴보고 추정량의 평균자승오차(MSE)를 서로 비교하여 본다. 분산성분비율에 대한 새로운 추정량이 제 안되며, 제안된 추정량을 사용하면 모의실험을 통하여 Das (1992)가 고려한 여러가지 형태의 추정량들보다 급내상관계수 ${\rho}$의 값이 대략 0.2 < ${\rho}$ < 0.7인 경우에 MSE 효율성이 높아짐을 밝혔다.

• The Journal of the Korea Contents Association
• /
• v.12 no.10
• /
• pp.357-364
• /
• 2012

Dental scanner-based dental digital models have been developed that have the potential to replace conventional stone model. The aim of this study was examine the accuracy and reliability of measurements made on digital models. A master model with the prepared upper full arch tooth was used. Stone model(N=10) were produced from master model, and on the other hands, digital models were made with the white light scanner(Identica, korea). One examiner individually measured 6 parameters on the conventional model and the digital models on two occasions. The student's t-test for paired samples and intra-class correlation coefficient(ICC) were used for statistical analysis. At the intra-examiner reliability of measurement, ICC at the stone and digital models were 0.75 and 0.87. The mean difference between measurements made directly on the stone models and those made on the digital models was 0.11-0.23mm, and was statistically significant(P<0.05). These in vitro studies show that accuracy of the digital model is similar to that of the stone model. These results will have to be confirmed in further clinical studies.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.12
• /
• pp.1122-1128
• /
• 2018

Purpose: To compare the measurements of the rebound tonometer (RT), Goldmann applanation tonometer (GAT) and noncontact tonometer (NCT) in patients who underwent penetrating keratoplasty (PKP), and to evaluate the reproducibility of the RT measurements. Methods: This study included 19 PKP eyes and 28 normal eyes. We compared the intraocular pressure (IOP) measurements of the GAT and NCT with the RT in both groups using Spearman's correlation analysis and the Wilcoxon signed-rank test. The IOP, as measured with an RT in each group, was assessed with respect to reproducibility using the intraclass correlation coefficient (ICC). Results: In normal eyes, there was no significant difference in the measurements obtained with the RT, GAT, and NCT (p > 0.050). In the patient group, the RT measurements were not significantly different from those of the GAT (p = 0.872), but they were significantly lower than those obtained with the NCT (p = 0.011). However, the RT measurements showed a relatively high correlation with those of the GAT and NCT (r = 0.770 and 0.879, respectively). The ICC of the RT was 0.986 for the PKP eye group and 0.961 for the normal eye group, both of which were highly reproducible. Conclusions: In PKP eyes, the measurements obtained with the RT showed a relatively high correlation with those of the GAT and NCT, and the repeatability of the RT measurements was high and similar to those for normal eyes. The RT can therefore be considered a useful method for measuring the IOP in PKP eyes.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.81-90
• /
• 2001

One of the Repeated survey which estimates variability of population, we can be consider rotation sample survey. There are two kinds of rotation sample survey - onelevel rotation sample survey and multi-level rotation sample survey. In rotation sample survey, Composite estimator is used to measure level or level change of the population. This study suggests Generalized Composite estimator as considering intraclass correlation in multi-level rotation sample survey, and optimal weight minimizing variance of estimator. Numerical example shows efficiency of Generalized Composite estimator as considering intraclass correlation according to the sample unit and change degree of intraclass correlation in the rotation group.