• Journal of the KSME
• /
• v.33 no.1
• /
• pp.47-65
• /
• 1993

판재의 스탬핑 성형성평가를 위해 소재제조업체와 자동차업체에서 널리 사용되고 있는 2,3개의 대표적인 모사실험과 컴퓨터 모드의 실험에 대하여 소개하였고 각각의 특징들에 대하여 논하 였다. 스탬핑금형의 개발과 연속생산공정에 있어서 성형한계선은 원형그리드해석기법과 함께 핀재의 성형난이도 평가 및 불량원인 규명과 조치에 유용하게 사용가능하다. 또한 돔장출실험과 평면변형장출실험에서 각각 얻어지는 한계돔높이와 한계펀치높이는 입하코일에 대한 스탬핑성 공여부의 사전확인 및 연속생산 공정에 대한 통계적 품질관리수단으로 활용하면 스탬핑공정에 서의 불량률감소 및 생산성향상에 기여할 수 있을 것으로 생각된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.253-254
• /
• 2010

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.107-113
• /
• 1995

To investigate the behavior of platic deformation inaxisymmetric hot extrusion through square dies, the physical modelling with the plasticine as a model material is carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using experimetal grid distortion is introduced to anlayze the plastic flow, strain rate and strain distribution.

• Transactions of Materials Processing
• /
• v.1 no.2
• /
• pp.20-31
• /
• 1992

대형 강괴의 업셋팅 공정은 주조 조직의 방향성을 없애고, 코깅작업의 효율을 향상시키기 위한 충분한 단조비를 확보하기 위하여 필요한 공정이다. 공정에 영향을 주는 인자로써 상부 금형의 형상을 변화시켜 가면서 해석을 수행하였다. 극단적인 긴 파이프성 기공의 변형거동과 중심부에서 높이에 따른 원형기공의 닫힘거동 및 압하율과 기공폐쇄 정도를 관찰하였다. 충분한 단조비를 얻고 기공의 닫힘 및 압착을 이루기 위한 적절한 압셋팅 다이의 선택 및 업셋팅 공정을 예측하여 공정개선에 기여하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.253-253
• /
• 2004

방전가공은 현재의 정밀 금형산업에서는 필수적인 가공방법이나, 공작물과 전극사이에서 방전이 발생할 때 고온고압의 플라즈마 상태에서 재료를 제거하는 메카니즘에 대한 해석은 아직도 많은 연구 대상이다. 방전가공은 기본적으로 3단계의 과정으로 구별할 수 있는데, 첫째 공작물과 전극의 간격과 기하학적 형상, 전압에 의해서 전계가 집중되어 절연체의 절연강도보다 초과하면 절연체가 이온화되어 방전이 시작된다. 둘째, 전극과 공작물이 통전이 되어 플라즈마 채널이 형성되면서 열에너지에 의하여 공작물이 용융 증발이 발생한다.(중략)

• Design & Manufacturing
• /
• v.17 no.4
• /
• pp.24-32
• /
• 2023

In this study, we introduce research aimed at minimizing machining errors without compromising productivity by compensating for the machining errors caused by tool deformation. Our approach experimentally establishes the direct correlation between cutting depth and machining error, and creates predictive models using mathematical functions. This method allows for the prediction of compensated cutting depths to obtain the desired cutting profiles, thereby maximizing the compensation of machining errors in the cutting process.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.251-256
• /
• 2001

Deformation analysis of injection molded articles whose geometry is considered as the assembly of the thin flat plates has been conducted. For the in-mold analysis, thermo-viscoelastic stress calculation of rheologically simple amorphous polymer and in-mold deformation calculation considering the in-plane mold constraint has been done. Free volume theory has been used for the non-equilibrium density state by the fast cooling. At ejection, the redistribution of stress together with instantaneous deformation has been considered. During out-of-mold cooling after ejection, thermoelastic model based on the effective temperature has been adopted for the calculation of deformation. Two typical mold geometries are used to test the numerical simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.122-129
• /
• 2004

In plastic working, as working becomes speedy, automatic and working condition deteriorates, the increase of forging working has been remarkable. Therefore, we need the estimation of mold lift in detail, in order to counterplan of effective mold life extension. In this study, on the SKH51, mold steel which is forged by cold working and the KCW1, tool steel of low alloy, we estimated mold life on the base of FEM analysis and investigated mold lift by low cycle fatigue test. Also, this paper suggested a new method of estimation of mold lift.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.55-61
• /
• 2011

Battery cases have been made of polypropylene and its warpage is relatively large due to the crystalline characteristic of polypropylene. In this study, the battery case when the injection mold used to improve the Gate by simplifying the process of production cost savings and focus on improving the quality of molding CAE analysis was carried out. The result could be produced in plastic and products of the imbalance in the flow and deformation and to predict reliability of the product will contribute to reduced scrap.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.804-807
• /
• 1997

Recently equal-channel angular pressing (ECAP) has been employed to produce ultra-fine grain size materials. In this paper pure-Zirconium is considered due to its applicability to nuclear reactors. Among many process parameters of ECAP frictional effect on the plastic deformation of die has been investigated. The back pressure effect due to friction increases the stress level of die especially at the crossing area of channels, which may result in plastic deformation of die. The finite element method has been employed to investigate this issue.