• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.252-252
• /
• 2004

새로운 공작기계나 절삭공구의 설계 및 개선을 위하여 절삭 공정 중 발생되는 절삭력 성분을 정확히 예측하는 것이 필요하다. 절삭 과정에서 절삭력 정보의 중요성은 그동안 공작기계 분야에서 익히 강조되어 왔다. 특히 주 절삭력 정보는 공구 파손을 예측하고 마모를 감지하여 그 밖의 다른 오동작을 검출해 내는 것에 있어서 매우 중요한 것으로 잘 알려져 있다. 최근 공작기계 강성 및 성능의 향상, 고속절삭용 공구의 발전, 금형 산업의 생산성과 정밀도 향상의 요구로 머시닝센터를 중심으로 고속가공에 관한 연구가 활발히 진행되고 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.107-107
• /
• 2004

현재 자동차관련 산업 및 기계 산업에 이용되고 있는 기존의 Forming type의 컨베이어 시스템은 인장력에 의해 hinge belt plate가 늘어지는 현상이 발생하고 이 현상에 의하여 소음 기계의 마모 등의 고장의 원인이 되어왔다. 이에 이러한 현상을 줄이기 위해 H/B의 소재 두께를 높이므로 강성은 증가하는 반면에, 단위중량이 무거워지는 단점이 있으며, 또한 제품을 성형하는 금형의 강도와 수명 및 크기가 한정되어 있어 수요자의 다양한 요구에 부응하기 어렵다.(중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.386-392
• /
• 2009

This paper reports on the research which investigates acoustic signals acquired in progressive compressing, hole blanking, shearing and burr compacting process. The work piece is the head pin of the electric connector, whose raw material is the preformed steel bar. An acoustic sensor was set on the bed of hydraulic press. Because the acquired signals include the dynamic characteristics generated for all the processes, it is required to investigate signal characteristics corresponding to unit process. The corresponding dynamic characteristics to the respective process were first studied by analyzing the signals respectively acquired from compressing, blanking and compacting process. The combined signals were then periodically analyzed from the grinding to the grinding in the sound frequency domain and in the ultrasonic wave. The frequency of around 9 kHz in the sound frequency domain was much correlated to the tool wear. The characteristic frequency in the acoustic emission domain between 100 kHz and 500 kHz was not only clearly observed right after tool grinding but its amplitude was also related to the wear. The frequency amplitudes of 160 kHz and 320 kHz were big enough to be classified by the noise. The noise amplitudes are getting bigger, and their energy was much bigger as coming to the next regrinding. The signal analysis was based on the real time data and its frequency spectrum by Fourier Transform. As a result, the acousto-ultrasonic signals were much related to the tool wear progression.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.29-29
• /
• 2014

최근 화석에너지 고갈 및 에너지 수요의 폭발적 팽창을 해결하기 위하여 경량화와 내마모 측면에서 고효율 시스템을 적용한 자동차 및 각종 성형 기기들이 개발되고 있다. 특히 장치의 고성능화라는 요구조건을 충족시키기 위해서는 금속가공산업에서 표면개질의 중요성이 부각되고 있다. 이러한 표면개질에는 일반적으로 표면의 성질을 개선하여 마모(abrasion) 및 국부 압력(local stress) 또는 피로(fatigue), 마식(wear and corrosion)에 견디게 하여 부품의 수명증대와 제품의 소형화에 기여하고 있다. 이러한 표면개질법에는 경질의 물질을 표면에 코팅시켜 재료표면의 특성을 향상시키는 방법과 금속의 표면에 다른 원소를 침투 및 확산시키는 방법으로 나눌 수 있다. 확산방법으로 침탄, 질화, 보로나이징, 크마이징 처리 방법 등이 있다. 상업적으로 가장 많이 사용되는 표면 개질법은 침탄기술로서, 고온에서 짧은 시간내에 물성 향상이 가능하지만, 강의 변태점 이상의 온도에서 진행됨으로서, 변형에 따른 문제가 발생되어 후처리를 필요로 하는 문제점을 가지고 있다. 반면, 질화법은 변태점 이하의 저온에서 철강 표면에 N을 침투시켜 강을 경화시키는 특징을 가진다. 변형이 적고 질소원자가 강내에 침투함으로 인해 내마모성, 내피로성, 내식성 등의 물리적 성질을 향상시키는 점에서 유리하여 각종 정밀 부품 및 자동차 부품, 금형 등에 많이 사용된다. 또한, 경도 향상 및 결정구조의 영향으로 코팅처리시 모재와 코팅 층의 밀착력 향상을 가져오면 이러한 이유로 코팅 층의 하지 층으로써 각광 받고 있다. 본 발표에서는 플라즈마 질화의 이해를 높이기 위해 관련 기술에 대한 전반적인 소개와 향후 플라즈마 질화 기술의 적용이 기대되는 침탄대체 적용 가능 부품, 침류질화 기술, PECVD 공정과의 접목 등 산업적은 응용 측면에서 응용 분야에 대한 소개를 진행하고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.90-96
• /
• 2021

As real-time data of factories can be collected using various sensors, the adaptation of intelligent unmanned processing systems is spreading via the establishment of smart factories. In intelligent unmanned processing systems, data are collected in real time using sensors. The equipment is controlled by predicting future situations using the collected data. Particularly, a technology for the prediction of tool wear and for determining the exact timing of tool replacement is needed to prevent defected or unprocessed products due to tool breakage or tool wear. Directly measuring the tool wear in real time is difficult during the cutting process in milling. Therefore, tool wear should be predicted indirectly by analyzing the cutting load of the main spindle, current, vibration, noise, etc. In this study, data from the current and acceleration sensors; displacement data along the X, Y, and Z axes; tool wear value, and shape change data observed using Newroview were collected from the high-speed, two-edge, flat-end mill machining process of SKD11 steel. The support vector machine technique (machine learning technique) was applied to predict the amount of tool wear using the aforementioned data. Additionally, the prediction accuracies of all kernels were compared.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.1
• /
• pp.31-37
• /
• 2011

Recently, the technology of surface treatment is being more important which affects the material cost reduction and substitution to the expensive material. The material used for the mechanical processing should have not only high intensity, but also strength toughness, wear resistance and corrosion resistance. In order to increase the durability and have better quality of the parts using such kind of tooling material, various kinds of research of the surface hardening through many kinds of heat resources is being done and practically applied. In this study, the characteristics of hardening surface zone for high strength of the press die material through laser beam irradiation are researched. In this study, it is experimentally observed by the status of the surface morphology, tensile strength, the hardness distribution of the base metal and wear condition by the surface hardness pattern by the laser beam based on the process parameters of $CO_2$ laser by using SM45C and STD11 used for press tool. Through this research, the characteristics of surface hardened zone for high strength of the thin metal by laser beam irradiation is done.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.46-51
• /
• 2022

The piercing process of creating holes in sheet metals for mechanical fastening generates high shear force. Real-time monitoring technology could predict tool damage and product defects due to this severe condition, but there are few applications for piercing high-strength aluminum. In this study, we analyzed the load signal to predict the punch's wear level during the process with a piezoelectric sensor installed piercing tool. Experiments were conducted on Al6061 T6 with a thickness of 3.0 mm using piercing punches whose edge angle was controlled by reflecting the wear level. The piercing load increases proportionally with the level of tool wear. For example, the maximum piercing load of the wear-shaped punch with the tip angle controlled at 6 degrees increased by 14% compared to the normal-shaped punch under the typical clearance of 6.7% of the aluminum piercing tool. In addition, the tool wear level increased compression during the down-stroke, which is caused by lateral force due to the decrease in the diameter of pierced holes. Our study showed the predictability of the wear level of punches through the recognition of changes in characteristic elements of the load signal during the piercing process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.468-472
• /
• 2005

In order to prevent adhering of molten glass on a mold wall, the wall is swabbed with lubricant oil before forming. However, the swabbing process can be removed from the entire processes of the glass forming if the mold wall is made of a porous sintered material. The purpose of the present study is to manufacture a sintered material(having a sintered density of $85{\~}90\%$)which is the most appropriate into. plane material for a glass mold. For the research, SUS310L-based coarse powder (${\~}150{\mu}m$) and SUS420J2-based fine powder ($40{\~}50{\mu}m$) were used for the compact materials, and effects of compaction pressure and sintering condition(atmosphere, temperature) were investigated. The results obtained were as fellows. (1) By means of solid phase sintering, a desired sintering density could not be achieved in any case when using a 310L-based powder having a large particle size. (2) When sintering green compacts(compaction pressure of $2ton/cm^2$) in a commercial vacuum furnace(at $1300^{\circ}C$ for 2 hours), the sintered compacts had densities of $6.2g/cm^3(79\%)$ for 310L + 0.03$\%$B, $6.6g/cm^3 (86\%)$ for 420J2, $7.3g/cm^3(95\%)$ for 420J2+(0.03)$\%$B, and $7.6g/cm^3(99\%)$ for 420j2+(0.06)$\%$B, respectively. As a result, it is regarded that sintered compacts having a desired porosity may be achieved by vacuum sintering the 420J2-based powder (low pressure compaction) and the 310L+0.03$\%$B-based powder (high pressure compaction).

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.133-139
• /
• 2004

High speed machining (HSM) can reduce machining time with the high metal removal rate by high speed spindle and feedrate. This paper supports HSM technology using the small size tool with the optimal tool path generation and modification of tool change. The optimum tool path is generated to reduce cutting length of cavity pattern and change the cutting tool for preventing the tool breakage by wear. The tool path is modified with the experiment data of tool wear and breakage to support tool change on reasonable time. The result can contribute to HSM technology of high hardness materials using the small size end-mill.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.518-520
• /
• 2011

금속분말 쾌속조형법의 한 종류인 DMLS 공정은 사출성형품의 균일한 냉각이 가능한 3차원 냉각시스템을 포함한 코어, 캐비티 제작이 가능하다. 그러나, 코어 및 캐비티 내 미세형상의 경우 DMLS로 제작하기에는 난해하므로 별도 미세 절삭가공을 통해 제작할 필요가 있다. 따라서, 본 연구에서는 DMLS금형강 소재의 미세 절삭가공 특성을 분석하고자 하였으며, 이를 위하여 HIP 공정 적용 전 후 DMLS금형강 소재를 대상으로 미세 절삭가공 실험을 수행하고 버 발생 및 공구마모 경향을 분석하였다. 실험 결과 HIP 적용 전 시편이 강도 및 조직측면에서 미세 절삭가공에 상대적으로 유리함을 확인할 수 있었다.