Browse > Article
http://dx.doi.org/10.5050/KSNVN.2009.19.4.386

Characterization of Acousto-ultrasonic Signals for Stamping Tool Wear  

Kim, Yong-Yun (충북대학교 기계공학부)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.19, no.4, 2009 , pp. 386-392 More about this Journal
Abstract
This paper reports on the research which investigates acoustic signals acquired in progressive compressing, hole blanking, shearing and burr compacting process. The work piece is the head pin of the electric connector, whose raw material is the preformed steel bar. An acoustic sensor was set on the bed of hydraulic press. Because the acquired signals include the dynamic characteristics generated for all the processes, it is required to investigate signal characteristics corresponding to unit process. The corresponding dynamic characteristics to the respective process were first studied by analyzing the signals respectively acquired from compressing, blanking and compacting process. The combined signals were then periodically analyzed from the grinding to the grinding in the sound frequency domain and in the ultrasonic wave. The frequency of around 9 kHz in the sound frequency domain was much correlated to the tool wear. The characteristic frequency in the acoustic emission domain between 100 kHz and 500 kHz was not only clearly observed right after tool grinding but its amplitude was also related to the wear. The frequency amplitudes of 160 kHz and 320 kHz were big enough to be classified by the noise. The noise amplitudes are getting bigger, and their energy was much bigger as coming to the next regrinding. The signal analysis was based on the real time data and its frequency spectrum by Fourier Transform. As a result, the acousto-ultrasonic signals were much related to the tool wear progression.
Keywords
Compressing; Blanking; Deburring; Frequency Spectrum; Tool Wear; Signal Process; Fourier Transform;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kim, W. I. Wang, D .H. and Kim, Y. S., 2002, 'Behaviors of Cutting Force and Acoustic Emission in Different Helix Angle End Milling,' Journal of the Korean Society of Manufacturing Technology, Vol. 1, No. 1, pp. 15-22
2 Yalcin, M. Ertekin, Kwon, Y. J. and Tseng Tzu-Liang(Bill), 2003, 'Identification of Common Sensory Features for the Control of CNC Milling Operations under Varying Cutting Conditions,' International Journal of Machine Tools & Manufacture, Vol. 43, pp. 897-904   DOI   ScienceOn
3 Dragos, A., Axinte, N. G., Kate, F. and Iker, U., 2004, 'Process Monitoring to Assist the Workpiece Surface Quality in Machining,' International Journal of Machine Tools & Manufacture, Vol. 44, pp. 1091-1108   DOI   ScienceOn
4 Rajesh, G., Tapas, K. D., Arun, K. S. and Ashok, K., 2003, 'Wavelet-Based Identification of Delamination Defect in CMP(Cu-Low k) Using Nonstationary Acoustic Emission Signal,' IEEE Transactions on Semiconductor Manufacturing, Vol. 16, No. 4, pp. 677-685   DOI   ScienceOn
5 Kwak, J. S. and Ha, M. K., 2002, 'Intelligent Diagnosis of Grinding State Using AE and Power Signals,' Journal of the Korean Society for Power System Engineering, Vol. 6, No. 2, pp. 60-67
6 Kwak, J. S. and Ha, M. K., 2004, 'Neural Network Approach for Diagnosis of Grinding Operation by Acoustic Emission and Power Signals,' Journal of Materials Processing Technology, Vol. 147, pp. 65-71   DOI   ScienceOn
7 Godin, N., Huguet, S., Gaertner, R. and Salmon, L., 2004, 'Clustering of Acoustic Emission Signals Collected during Tensile Tests on Unidirectional Glass/Polyester Composite Using Supervised and Unsupervised Classifiers' NDT&E International, Vol. 37, pp. 253-264   DOI   ScienceOn
8 Kim, Y. Y. and Lee, C. H., 2007, 'An Investigation of Acoustic Signal Characteristics in Turning of Aluminum,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No.6, pp. 240-246
9 Kim, J. D. and Lee E. B., 1993, 'A Study on the Modeling of Tool Motion and High Accuracy Surface Generation by Use of Cutting Force Signal,' Journal of KSME, Vol. 17, No. 8, pp. 1951-1962
10 Lee, E. B. and Kim, J. D., 1993, 'A Study on the Prediction of Mirror-like Surface Generation by Frequency Analysis of Cutting Force and Simulation,' Journal of KSME, Vol. 17, No. 3, pp. 576-585
11 Kwak, J. S. and Song, J. B., 2000, 'Estimation of the Ground Surface Roughness Applied by Acoustic Emission Signal,' Journal of KSPE, Vol. 17, No. 4, pp. 240-246   과학기술학회마을
12 Kim, J. D., Kim, S. R., Kim, H. Y. and Ahn J. H., 2001, 'Development of Acoustic Emission Sensor Using Piezoelectric Elements and Monitoring System for Polishing Process,' Proceedings of the Korean Society of Precision Engineering Conference, pp. 560-565