• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.503-508
• /
• 1987

The protonation constants of 3,4 : 9,10-dibenzo-1,12-diaza-5,8-dioxacyclotetradecane $(NenOenH_4)$ and stability constants of its transition metal complexes have been determined by the potentiometric titration in 1 : 1 dioxane-water mixture with 0.1 ionic strength at $25^{\circ}C.$ For a given anion system, the stabilitv constants of the complexes are in the order of $Mn^{2+}<\;Co^{2+}\;< Ni^{2+}\;<\;Cu^{2+}\;>\;Zn^{2+}$, which accords with the Williams-Irving series.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.7-14
• /
• 2002

Laser ablation ion trap mass spectrometry (LAITMS) was developed for the analysis of metal and ceramic samples. For this study, XeCl excimer laser (308 nm) was used for ablating the samples and ITMS was used as a detector. Samples were introduced from outside of a ring electrode and this way of sample introduction was very effective for solid samples when laser ablation was employed. Helium gas was used as a buffer gas, and its effect on sensitivity and some parameters (buffer gas pressure, ion storage time, and cut-off RF voltage) were studied. The optimized conditions were $1{\times}10^{-4}$ Torr of buffer gas pressure, 100 ms of ion storage time and $1150V_{p-p}$ of cut-off RF voltage. From that results, copper (Cu) and molybdenum (Mo) metals were tested with LAITMS and the mass spectra of these pure metals were compared with the natural abundance of isotope ratio. We also examined ceramic samples ($Al_2O_3$, $ZrO_2$) and represented the result of elemental analysis.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.174.2-174.2
• /
• 2016

도금은 크게 전해 도금과 무전해 도금으로 나눌 수 있다. 전기적 에너지를 사용하여 이온 상태의 금속을 환원시켜 석출함으로써 도금을 진행하는 전해 도금과는 달리 무전해 도금은 도금액 내의 환원제에 의해 금속 이온을 환원시켜 도금을 진행한다. 무전해 도금법은 전해 도금에 비해 전류 인가 장비가 필요하지 않아 도금 공정이 간단하고, 피도금체에 따른 인가 전류, 전압, 금속의 환원 전위 등을 계산하지 않아도 되기 때문에 전문적인 지식이 없어도 도금을 할 수 있다. 하지만 무전해 도금은 도금이 진행 될수록 도금액 내 금속 이온, 환원제의 농도 등이 수시로 변화하기 때문에 도금액의 조성을 파악하여 원하는 두께의 도금층을 형성하는 방법에 대한 연구가 필요하다. 본 연구에서는 무전해 도금액 내 환원제, 도금액 온도, 도금 시간을 변경하여 Ni 무전해 도금을 형성 하였고 그 특성을 평가하였다. 도금은 각각 플라스틱, RF module 유리 등 다양한 기판에 진행 하였으며, 도금 후 밀착성, 도금 두께 및 microstructure를 분석하였다. 도금 후 밀착성을 분석하기 위해 열처리 후 박리정도를 테스트를 하였고, 도금 두께 및 microstructure를 분석하기 위해 field emission scanning electron microscope (FE-SEM), energy-dispersive spectroscopy (EDS)를 사용하였다. 실험 결과, 두께 $3{\sim}5{\mu}m$ 급의 균일한 도금층이 형성된 것을 확인하였으며, $260^{\circ}C$에서 3회 열처리 후 박리성 평가 결과, 결함 없는 양호한 표면을 나타내었다.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.651-655
• /
• 1999

Xylenol Orange was bonded on an anion-exchange resin (Amberlite lRA 400, in $Cl^-$form) by batch equilibration. The resin was proved to be stable in acidic solutions of about 0.1 M HCl, $HNO_3$ or $H_2SO_4$. Sorption capacities for the metal ions on the Amberlite IRA 400 bonded with xylenol orange have been measured by batch method. The result showed that Fe(III) is higher than any other metals for sorption capacity. The preconcentration and the separation of Fe(lll) from the mixture soIution, therefore, were carried out with the 0.1 M sulfosalicylic acid as an eluent.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2011-2013
• /
• 2002

일반적으로, 전도성 고분자는 금속에 준하는 전기 전도도와 다공성을 이용한 전해질 이온 및 생채 고분자의 물리, 화학적 도우핑 능력을 장점으로 한다. 따라서, 이 분야의 최근 연구동향도 이온 도우핑에 의한 전도성 고분자의 전기 전도도 향상에 초점이 맞추어져 있으며, 이미 다수의 연구진에 의행 여러 가지 방법이 제시되었다. 본 논문은 전기 화학적 cementation 공정을 이용하여 금속 이온을 전도성 고분자에 도우핑하고 특성을 고찰하였다. 전도성 고분자로써 polypyrrole (PPy)을 사용하고, micropaticles (구리와 니켈 이온)를 도펀트 (dopant)로 하여 -1.5 V ${\sim}$ 2V의 범위에서 순환 전압 전류법 (Cyclic voltammetry)을 이용해 organic-inorganic complex를 제작하였고, 각각의 전극을 비교, 분석 하였다. 구리 이온을 도우핑한 PPy 필름은 전기 전도도가 매우 우수하나 대기 중 공기 및 수분에 의해 쉽게 산화되므로 life-time이 짧다. 이를 보완하기 위하여 상대적으로 안정한 니켈 이온을 도우핑한 PPy 필름의 전기 화학적 특성을 고찰하였다. 전극의 표면은 SEM (Scanning Electron Microscopy), EDX (Energy Dispersive X-ray spectroscopy)를 이용하여 분석하였다.

• Journal of the Korean Chemical Society
• /
• v.39 no.4
• /
• pp.266-274
• /
• 1995

The extractions of aqueous Eu3+ and Tb3+ ions into ethylacetate or dichloromethane were conducted by using 12-crown-4, 15-crown-5 and 18-crown-6 ethers as ligand. Benzoate ion was selected as counter anion for the complexes formed between the lanthanide ions and crown ethers. Fluorescence spectra of the lanthanide ions induced by the energy transfer from benzoate anion to the cations were also measured. The quantitative analysis of the lanthanide ions extracted into organic phase were made on the basis of the results of fluorescence. The measured extractivity is interpreted in terms of the ion-dipole interaction.

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.353-360
• /
• 1983

The adsorption behavior of 8-hydroxyquinoline (8HQ) on Amberlite XAD-4 and-7 resins was investigated by measuring its distribution coefficients under various experimental conditions, such as shaking time, pH and concentration of methanol in the medium. The application of 8HQ-impregnated-XAD resins for the absorption and separation of metal ions was studied. The maximum adsorption of 8HQ on XAD resins was observed in the 30% methanol solution having pH range from 6.0 to 9.0. The impregnation capacities of XAD resins for 8HQ were 3.81${\times}$10-2mmol, 8HQ/g, XAD-4 resins and 2.60${\times}$10-2mmol, 8HQ/g, XAD-7 resin, respectively. The 8HQ-impregnated-XAD resins were stable in pH range from 6.0 to 10.0 and the amount of 8HQ leached from XAD-4 resin by eluting with hydrochloric acid(above 5M) was negligible. The optimum pH range for the adsorption of metal ions on 8HQ-impregnated XAD resin was also 6.0 to 10.0, and the adsorption mole ratio of metal ion to 8HQ were 1 : 2 for Cu(II), Cd(II) and Ni(II), and 1 : 3 for Fe(III) at the above pH range. It was found that the absorbed metal ions on 8HQ-impregnated-XAD resins were recovered quantitatively with 5M HCl and 8HQ-impregnated-XAD-4 resin could be reusable over 5 times without decrease in its impregnation capacity.

• Journal of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.21-25
• /
• 1981

A study was made of the influence of butyl alcohol on the distribution coefficients of barium and mercury ions between the ion exchange resin, Dowex 50w-x8, 200~400 mesh and solutions containing hydrochloric acid, butyl alcohol and water. The determination of the distribution coefficients of barium and mercury are made by using the batch method. The distribution coefficients of metal ions decrease generally as the number of branches of carbon in the molecule of butyl alcohol increase. It shows that solubility in water and stereo-isomerism of the butyl alcohol have influence upon the distribution coefficient of barium and mercury.

• YAKHAK HOEJI
• /
• v.16 no.2
• /
• pp.73-84
• /
• 1972

단백질과 전이금속 이온들과의 상호작용을 연구하는데 있어서 단백질중의 이미다졸기 및 아미노산의 반응성은 중요하다. Cd(II)-2-메틸이미다졸 착물들의 경우 이미다졸 분자중의 결합측은 "피로올"형 보다 오히려 "피리딘" 질소임을 알 수 있다. 이 착물들의 환원파는 가역적이며 2전자반응으로 나타난다. 그리고 이미다졸 존재하의 Ni(II) 이온은 촉매파를 나타내며 Ni(II) 이온만의 환원파는 불가역성인 것에 비해 가역성을 보여주었다. 또한 그 반파전위는 Ni(II) 이온만의 반파전위보다 수백 mV 양전위로 이동된다. 이러한 성질은 전극 반응에 관여한 주물질이 전극 표면에서 흡착되어 환원되기 때문이다. 이미다졸 농도의 대수값에 대해 반파전위를 도시했을 때 그 기울기가 30mV로써 이론치와 일치한다. 한편 $Cd(II)-2CH_{3}Im$의 단계적 생성항수 $pK_{1},pK_{2},pK_{3},pK_{4}$는 각각 2.68, 4.01, 4.90, 5.36이었다.4.01, 4.90, 5.36이었다.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.466-473
• /
• 2000

The complex formation constants (${\beta}_{MLn}$) of potassium and various sodium-selective neutral carriers in solvent polymeric membranes have been determined using solvent polymeric membrane-based optodes and ion-selective electrodes (ISEs). Two different types of PVC-based membranes containing the H^+selective chromoionophore (ETH 5294) with and without a sodium ionophore (4-tert-bntylcalix[4]arenetetraacetic acid tetraethyl ester, ETH 2120, bis[(12-crown-4)methyl] dodecylmethylmalonate or monensin methyl ester) were prepared and their optical responses to either the changes in alkali metal cation (e.g., sodium and potassium) concentrations at a fixed pH (0.05 M Tris-HCl, pH 7.2) or varying pH at a fixed alkali metal cation concentration (0.1 M) were measured. The same type of membranes were also mounted in conventional electrode body and their potentiometric responses to varying pH at a fixed alkali metal cation concentration (0.1 M) were measured. The complex formation constants of the ligand could be calculated from the calibration plots of the relative absorbance vs. the activity ratios of cation and proton ($a_{M^+}/a_{H^+}$) and of the emf vs. pH. It was confirmed that the ratio values of the complex formation constants for the primary and interfering ions are closely related to the experimental selectivity coefficients of ISEs.