• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.19-32
• /
• 2010

Electrolytic reduction technology is essential for the purpose of adopting pyroprocessing into spent oxide fuel as an alternative option in a back-end fuel cycle. Spent fuel consists of various metal oxides, and each metal oxide releases an oxygen element depending on its chemical characteristic during the electrolytic reduction process. In the present work, an electrolytic reduction behavior was estimated for voloxidized spent fuel based on the assumption that each metal-oxygen system is independent and behaves as an ideal solid solution. The electrolytic reduction was considered as a combination of a Li recovery and chemical reactions between the metal oxides such as uranium oxide and the produced Li metal. The calculated result revealed that most of the metal oxides were reduced by the process. It was evaluated that a reduced fraction of lanthanide oxides increased with a decreasing $Li_2O$ concentration. However, most of the lanthanides were expected to be stable in their oxide forms. In addition, a semi-empirical model for describing $U_3O_8$ electrolytic reduction behavior was proposed by considering Li diffusion and a chemical reaction between $U_3O_8$ and Li. Experimental data was used to determine model parameters and, then, the model was applied to calculate the reduction yield with time and to estimate the required time for a 99.9% reduction.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.17-23
• /
• 2002

The more productive and stable fabrication can be obtained by applying chemical mechanical polishing (CMP) process to shallow trench isolation (STI) structure in 0.18 $\mu\textrm{m}$ semiconductor device. However, STI-CMP process became more complex, and some kinds of defect such as nitride residue, tern oxide defect were seriously increased. Defects like nitride residue and silicon damage after STI-CMP process were discussed to accomplish its optimum process condition. In this paper, we studied how to reduce torn oxide defects and nitride residue after STI-CMP process. To understand its optimum process condition, We studied overall STI-related processes including trench depth, STI-fill thickness and post-CMP thickness. As an experimental result showed that as the STI-fill thickness becomes thinner, and trench depth gets deeper, more tern oxide were found in the CMP process. Also, we could conclude that low trench depth whereas high CMP thickness can cause nitride residue, and high trench depth and over-polishing can cause silicon damage.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.65-71
• /
• 2018

Paper packs, glass bottles, metal cans, and plastic materials are classified according to packaging material recycling groups that are Extended Producer Responsibility (EPR). In the case of waste paper pack, the compressed cartons are dissociated to separate polyethylene films and other foreign substance, and then these are washed, pulverized and dried to produce toilet paper. Glass bottle for recycling is provided to the bottle manufacturers after the process of collecting the waste glass bottle, removing the foreign substance, sorting by color, crushing, raw materializing process. Waste glass recycling technology of Korea is largely manual, except for removal of metal components and low specific gravity materials. Metal can is classified into iron and aluminum cans through an automatic sorting machine, compressed, and reproduced as iron and aluminum through a blast furnace. In the case of composite plastic material, the selected compressed product is crushed and then recycled through melt molding and refined products are produced through solid fuel manufacturing steps through emulsification and compression molding through pyrolysis. In the recycling process of paper packs, glass bottles, metal cans, and plastic materials, the influx of recycled materials and other substances interferes with the recycling process and increases the recycling cost and time. Therefore, the government needs to improve the legal system which is necessary to use materials and structure that are easy to recycle from the design stage of products or packaging materials.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.238.1-238.1
• /
• 2011

본 연구에서는 non-contact deposition method의 일환인 ESD (electroctatic deposition)의 박막공정을 이용하여 Conductive layer 위에 Gold nanoparticles 및 Silver nanoparticles 등 organic/inorganic nano particle conductive ink system의 단분산 2D 박막을 제조를 연구하였다. ESD head를 통해 여러가지 organic / inorganic nano particle conductive ink system을 Deposition하였으며 분산도가 높고 균일한 단분산의 2차원 박막 구조를 얻을 수 있었으며, 전도성 PEDOT과의 Hybridization을 통해 균일상의 표면 Morphology를 갖는 고 전도성 투명 필름을 제작하였다. ESD technique를 이용하는 박막공정 기술은 나노입자 및 나노구조물의 박막화 패턴화를 포함하는 새로운 Deposition 기술로써 이를 응용하여 금속 나노입자의 2차원의 패턴화된 박막 구현을 통해 유기반도체 및 전자소자에의 응용성을 증거할 수 있었다.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1248-1256
• /
• 1996

Ni 및 AI단원소 분말을 혼합하여 attrition mill을 사용하여 분위기 속에서 기계적 합금화 NiAI 기 산화물 분산강화 금속간화합물을 제조하였다. 제조된 분말은 여러 가지 다른 미세조직을 얻기 위하여 각기 다른 공정으로 열간성형을 하였으며, 연이어 이차 재결정 조직을 얻기 위한 가공열처리(thermomechanical treatment)를 실시하였다. 이차 재결정이 일어날 수 있는 선수조건으로서의초기 미세조직과 가공열처리와의 상관관계를 조사하였다. 정상 결정립 성장의억제와 접합조직의 존재가 이차 재결정을 일으키기 위한 필요조건으로 판명되었다. 이 재료에 있어서, 잔류 변형에너지를 공급할 수 있고 결정립을 미세화 할 수 있는 특정 공정하에서 항온 열처리 후 이차 재결정이 생성됨을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.223-231
• /
• 1995

Mechanical alloying behavior of the PbTe intermetallic compound, which is used for thermoelectric generation, has been investigated with milling time and ball-to-powder weight ratio. Formation of PbTe alloy was completed by mechanical alloying of the as-mixed Pb and Te powders for 2 minutes at ball-to-powder weight ratio of 2 : 1. In situ measurement of the abrupt temperature rise during the ball milling process indicated that the PbTe intermetallic compound was formed by a self-sustained reaction rather than diffusional reactions. Lattice constant of PbTe alloy fabricated by mechanical alloying, 0. 6462nm, was not varied with milling time and ball-to-powder weight ratio. This value of the lattice parameter is in excellent agreement with 0.6459nm, which was reported for PbTe powders processed by melting and grinding.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.279-282
• /
• 2007

When reformer for fuel cell is used, CO in hydrogen gas leads to a seriously decreased membrane electrode assembly (MEA) performance by catalyst poisoning. The effect of CO on performance of modified MEA by sputtering method is studied in this paper. The experimental results show that sputtered Pt and Ru thin film improve a single cell performance of MEA and sputtered metal thin film has a CO tolerance. The air injection process on anode show improved CO tolerance test result. Moreover, Pt, Ru and PtRu thin film by sputtering had influence on the CO tolerance with air injection process.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.37.1-37.1
• /
• 2009

몰리브덴 금속박막(Metal Mo)은 우수한 전기전도도로 인해 $CuInSe_2$로 대표되는 I-III-$VI_2$족 화합물 반도체 박막태양전지에서 후면전극으로 널리 이용되고 있는 재료로서 일반적인 증착방법으로CVD, PVD, Thermal evaporation, Sol-gel 등이 있으며, 이중에서 Sputtering에 의한 증착법이 주로 사용되고 있다. 이에 본 연구에서는 $MoO_3$분말의 수소 환원 과정 중에 발생하는 기상인 $MoO_3(OH)_2$ 기상의 화학증기수송(CVT)를 이용하여 $MoO_x$ 박막을 증착하고 다시 수소분위기에서 수소 환원하는 증착법을 통해 균일하고 부착성이우수한 Mo 박막을 제조 하였다. $550^{\circ}C$, 60min의 유지시간에서 약 900nm의 균일한 $MoO_x$ 박막을 증착하였으며, $650^{\circ}C$, 15min 의 환원조건에서 모두 금속 몰리브덴 박막으로 상변화 함을 XRD와 SEM을 통해 확인하였다. 본 연구에서 사용된 화학증기수송에 의한 박막 증착은 기존의 공정에 비해 매우 저렴하며, 반응중에 유해하지 않은 부산물로 인해 환경 친화적이며 또한 대형화가 가능한 공정으로 많은 응용이 기대된다.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.67-67
• /
• 2003

자동차, 항공기, 산업기계, 운반기계, 철도차량, 공작기계 등 거의 모든 산업부문에서 사용되는 베벨기어의 냉간단조 공정 및 금형 설계를 위한 해석을 수행하였다. 소성가공에 의해 생산된 베벨기어는 기계적 성질이 우수하여 동력 전달장치의 수명연장 및 신뢰성, 소형화 등을 달성할 수 있으며 생산 원가 절감의 효과가 크기 때문에 냉간 단조의 공정설계는 매우 중요하다. 베벨기어의 단조에 대한 상계해석 결과는 금형 설계 시 프레스에 필요한 단조하중을 예측할 수 있으므로 프레스의 최적성형과 안전한 금형 설계를 도모할 수 있다. 따라서 본 연구에서는 베벨기어의 냉간 단조시의 내부 동적 가용속도 장을 제시하였고 단조하중, 금속유동 등을 계산하였다. 또한 강소성 유한요소해석을 동시에 수행하여 제시한 동적 가용속도장의 적절성을 비교 검토하였다. 본 연구의 결과는 베벨기어의 적절한 냉간 단조 성형공정 및 공정설계를 위한 기초자료로 활용될 수 있을 것이다.