• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.259-262
• /
• 1999

The copper-catalyzed reaction of silicon with methanol was carried out in a mixed bed reactor to obtain tetramethyl orthosilicate (TMOS). In order to determine the kinetics of the reaction per active site on the silicon surface, a flow rate transition technique was employed. A kinetic study showed the reaction was in Linear relationship with the amount of contact mass and independent on the concentration of methanol. This result indicated that the rate-determining step was not the chemical process involving methanol, but the formation of silicon intermediate on the contact mass. On the basis of optimum experimental conditions, the maximum TMOS formation rate per g-silicon is 0.030 (g/min) at $210^{\circ}C$, in which activation energy was 8.5 kcal/mol and reaction rate equation was $k=4.09{\times}10^4\;exp$ ($-4.73{\times}10^3/T$).

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.215-222
• /
• 1994

As a toughness modifier for plastics chlorosulfonated polyethylene(CSM) can be used. CSM has a good resistance to oxygen and ozone. CSM has a crosslinkable functional group(sulfonyl chorid) with sulfur and metal oxide. Polyvinylchloride(PVC) is widely used industrial plastics because of its balanced properties and low cost. But it has some disadvantages such as low impact strength, light, ozone and oxygen degradation. In order to improve these properties of PVC, CSM was blended with PVC. The toughening effect appeared at about 10wt% and there is no additional effect above 30wt% of CSM. The weatherability, ozone resistance and mechanical properties of PVC were improved by blending with CSM. The toughening mechanism is studied by SEM.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.562-567
• /
• 2007

The stereoselective synthesis of chiral terminal epoxide is of immense academic and industrial interest due to their use as versatile starting materials as well as chiral intermediates. In this study, new polymeric chiral Co(salen) complexes bearing tallium (III)chloride and iron (III)chloride (ferric chloride) have been synthesized and characterized. Their catalytic activity and selectivity have been demonstrated for the asymmetric ring opening of various terminal epoxides using water and phenol derivatives as nucleophiles. The easily prepared polymeric complexes exhibited very high enantioselectivity for the asymmetric ring opening of epoxides with $H_2O$ and phenol nucleophiles, providing enantiomerically enriched terminal epoxides (> 98% ee). The system described in this work is very efficient for the synthesis of chiral epoxide, 1,2-diol and ${\alpha}$-aryloxy alcohol intermediates.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.659-663
• /
• 2016

The efficiency of a heterogeneous ruthenium zirconia catalyst ($Ru(OH)_x/ZrO_2$) was demonstrated to the selective oxidative transformation of alkenes or alkynes. The scissions of C-C double bonds to aldehydes and triple bonds to diketones or carboxylic acids were carried out with (diacetoxyiodo)benzene as an oxidant under dichloromethane (5 mL)/water (0.5 mL) solvent system at $30^{\circ}C$ for wide range of substrates. The $Ru(OH)_x/ZrO_2$composite showed higher catalytic activity and selectivity than other ruthenium-based homogeneous or heterogeneous catalysts for the scission reaction. The catalyst exhibited a high mechanical stability, and no leaching of the metal was observed during the reaction. These features ensured the reusability of the catalyst for several times for the oxidative cleavage of unsaturated hydrocarbons.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2030-2037
• /
• 2012

The purpose of this research is to suggest a model or method of needs analysis for designing syllabuses. As the learner-centered approach in teaching and learning methods becomes general, the learners' needs or wants should be reflected on the syllabus design. However, standardized scores in the previous research have disadvantages to be distorted in data interpretations because the difference between the maximum value and minimum value is so big compared to the Likert 5 scales. To solve this disadvantage, the Max-Min method is used in the needs analysis for the syllabus design. So, the differences are presented. Needs analyses need to be selected variously according to situations. Thus, further researches are needed to develop several new methods as well as the Max-Min method or the standardized score method for the whole needs analyses.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.113-113
• /
• 2018

환경 친화형 전기자동차, 하이브리드 자동차, 전철 등에서는 고내압 및 소형으로 전력손실을 감소시킬 수 있는 파워 디바이스가 필수이다. 최근, 실리콘 카바이드(SiC, silcon carbide)는 기존 실리콘(Si)보다 스위칭 손실의 저감 및 고온환경에서의 동작 특성이 우수하여, 차세대 저 손실 전력반도체 재료로서 기대를 받고 있다. 용액 성장 법에서 고품질 SiC 결정을 만들 수 있다. 그러나 늦은 성장 속도 때문에 SiC의 양산을 어렵게 하고 있다. 현재까지 성장 속도 향상을 위한 Si용매에 Cr을 첨가하여 탄소 용해도를 높이는 방법이 사용되고 안정된 성장을 위한 Si-Cr용매에 Al를 첨가하는 등 다양한 금속을 첨가하는 방법이 이용되고 있다. 선행 연구에서는 다양한 용매인 탄소 용해도를 실측하고 특히 큰 탄소 용해도를 보인 것은 Co이었다. 본 연구에서는 $Si_{0.6}Cr_{0.4}$원료와 Co를 첨가한 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 용매에 의한 SiC용액 성장을 실시하고 결정 성장 속도 및 표면 상태의 변화를 검토했다. on-axis 4H-SiC(000-1)을 사용한 Top-seeded solution growth(TSSG)법과 원자 비율로 $Si_{0.6}Cr_{0.4}$와 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 용매를 이용하여 SiC 용액 성장을 실시했다. Ar가스에서 저항 가열로 내를 치환 후에 $1800^{\circ}C$까지 가열하고 종자화 후에 120분간 유지하고 결정 성장을 실시했다. 냉각 후에 성장의 표면에 남은 용매를 $HF+HNO_3$에서 제거했다. 광학 현미경을 이용하여 결정면과 두께를 관찰 측정했다. Co를 첨가한 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 경우는 $Si_{0.6}Cr_{0.4}$의 경우보다 결정 성장 속도가 향상됐다. 또한 $Si_{0.6}Cr_{0.4}$보다 step-flow의 성장을 나타낸 결정의 표면이 전반적으로 관찰됐으며 안정된 결정성장을 나타냈다. 본 연구에서 실시한 연구 방법과 결과는 고품질 및 고속의 SiC 용액성장을 위한 매우 유용한 자료로 활용 될 수 있을 것으로 판단한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.51-58
• /
• 1998

This paper deals with the power frequency electric and magnetic profiles from transformer and gas-insulated swichgear(GIS) perimeters in the indoor power substation. Measurements of electric and magnetic field magnitudes were carried out by using single axis and three axes field meters at a height of 1[m]. The resultant electric and magnetic field profiles measured in the vicinity of the transformer were displayed as a 2-dimensional plot. The electric fields intensity are relatively low value of about 2.3~9[V/m], and the magnetic fields intensity range from 0.3 to [$20.3\mu$T]. Also, in the GIS perimeter the electric fields intensity are in the range of 2.2~2.5[V/m], and the high magnetic fields are largely localized to the intermediate section of the GIS and their amplitudes are [$1.2~39.5\mu$T]. Metal enclosures of transform and GIS play a role in reducing the electric field, and the magnetic fields are characterized by a rapid decrease with distance from the transformer and GIS enclosures.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.23-29
• /
• 1990

The effect of a rapid freeze pretreatment of organic ion exchange resins on their grinding properties was studied. It was found that the structure of ion exchange resins was defected by freezing pressure formed in the process of rapid freezing. The defected resins didn't recover their own structure after thawing and those could be easy to be broken at room temperature by small force. Therefore, organic ion exchange resins could be ground readily at room temperature after rapid-freezing the fully swelled resins using by solid carbon dioxide, or liquid nitrogen. The rapid freeze pretreatment of cation exchange resins was very effective on grinding in particular. However, the effect of the pretreatment of anion exchange resins on grinding was less than that of cation exchange resins. In case of anion exchange resins, the ionic form of affected the grindability remarkably.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.475-480
• /
• 1998

A study on the electrochemical reduction of uranium (VI) to uranium (IV) was carried out in the mixed phases of an organic phase with uranium (VI) and aqueous phase of nitric acid by use of a highly packed glassy carbon (GC) fiber column electrode system, and a model for in-situ electrolytic stripping of uranium (VI) was suggested. The electrochemical reduction of uranium (VI) occurred faster in organic phase than in aqueous phase of the mixed phases. The uranium stripping yield increased and then became constant with the increase of organic flow rate of the electrolytic system due to the increase of diffusion resistance of uranium ions in the organic phase into the aqueous phase. Aqueous flow rate, on the other hand, didn't affect the total uranium (VI) reduction current in the system. The system combined with electrochemical reduction was confirmed to be much more effective than the simple system without it in stripping uranium.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.536-541
• /
• 1998

The porous size alumina membrane was prepared by anodic oxidation with current method in an aqueous solution of oxalic acid. The aluminum metal plate was pretreated with thermal oxidation, chemical polishing and electropolishing before anodic oxidation. Membrane thickness and pore size distribution were investigated with several anodizing conditions; reaction temperature, cumulative charge, electrolyte concentration and current density. The porous alumina membrane obtained was $55{\sim}75{\mu}m$ thick with straight micropore of 45~100nm. Also, the porous alumina membrane has an uniform pore diameter and pore distribution. It was inorganic ultrafiltration membrane as a kind of the ceramic membrane.