• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.55-62
• /
• 2015

The electromagnetic force induced by an intense electric current pulse, which generates an electromagnetic field around the metal jet originating from a shaped charge, can disperse and scatter the high-speed metal jet. An electric device consisting of an RLC circuit applies an intense electric current pulse that flows in the circuit while the metal jet passes between two electrodes. In this study, the metal jet formation was simulated using the ALE technique in 2-D, and a 3-D finite element model was mapped using 2-D simulation results to induce the electric current directly. The deformed shapes of the metal jet and the electromagnetic force were calculated using a finite element analysis by inducing the electric current directly, and the major parameters of the intense electric current pulse for breaking up the metal jet were examined.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.121-131
• /
• 2005

For thrust motion of high speed underwater torpedo the special hydro reactive fuels that burns in vapor water and water supply from aboard is used. The main component of this hydro reactive fuel is the powder of active metal (Mg, Al) that can burn in water vapor with large heat generation in the rocket combustion chamber. The thermodynamic analysis of combustion properties of the burning of the particles of these active metal in the vapor water have been carried out. The conception for the possible content variants of the hydro reactive fuels have been discussed using the geometrical and thermodynamic combustion conditions with the basic recommendation for contents of designed hydro reactive fuels in future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.577-584
• /
• 2014

In this study, the behavior of a shaped charge projectile's metal jet was analyzed using flash radiography. The projectile was installed horizontally to observe the behavior of jet for enough time. While the X-ray tube heads are fixed at one point, the behavior range of the jet is wide in this experimental set up, therefore the angle between the X-ray tube heads and the jet tip is changed continuously as jet moves forward. Jet particle's locations calculated from the X-ray films become different from their real positions under this situation because of the film to object distance(FTOD) and correction for error by FTOD is required. In this study, a method was devised to correct the error by FTOD and this was applied for the investigation of jet behavior of a 70 mm caliber's shaped charge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3028-3044
• /
• 1993

A metallic bond of great strength for the same or dissimilar metals can be produced by the explosive welding. The formation of a metallic jet at the interface between the two impacting plates has been simulated using the numerical hydrocode DYNA2D. The mechanism of explosive welding for the wave formation is also analyzed by the computer simulation technique. The microscopic with the experimentally observed behaviour of the explosive welding. The computer simulations of the explosive welding process have proven especially useful for analyzing the mechanism of metallic bones.

• Explosives and Blasting
• /
• v.36 no.2
• /
• pp.10-18
• /
• 2018

The shaped charge is used in explosive demolition of steel frame structure, but it was often not used because it was limited to use or impossible to supply at domestic and foreign. To solve this problem, we needed a device that could generate matal jets using industrial explosive. In this study, we made a charging container, which metal jets were generated when explosives were detonated. Cutting performance tests were carried out to evaluate the effect of cutting of a charging container on a steel plate of 25mm thickness. In addition, we compared the results between the numerical simulation of penetration process and cutting performance tests and then was evaluated a cutting performance for steel plates of 35mm and 70mm thickness.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.1
• /
• pp.26-32
• /
• 2014

In this study, DC (Direct current) type steam plasma igniter is developed for effective ignition of high-energy density metal aluminum and gas temperature is measured by emission spectrum of OH radical. Because of the ultra-high gas temperature, the DC plasma jet is measured by Boltzmann plot method which is the non-contact optical technique and spectrum comparison-analysis. And both methods were applied to experiment after accurate verification. As a result, we could identify that plasma jet temperature is 2900 K ~ 5800 K in the 30 mm range from the nozzle tip.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.9-15
• /
• 2012

As a propellant of a high speed underwater vehicle, the hydro-reactive solid metal particles using seawater as a oxidizer maximizes its specific impulse when the solid metal particles and the seawater are uniformly mixed in the combustion chamber. The purpose of this study is to investigate the effects of injector geometry on the particle distribution of similarity point of view. For the purpose of this similarity of the mean velocity and particle number density along the radial direction was measured by Particle Image Velocimetry(PIV).

• Journal of the KSME
• /
• v.32 no.7
• /
• pp.604-612
• /
• 1992

D-Gun과 plasma 코팅이라고 하는 코팅(도금) 기술은 1950년대 미국 유니온 카바이드사에 의해 세계 최초로 개발되어 실용화된 이래 전세계의 산업전반에 걸쳐 꾸준히 그 응용분야가 확대되어 왔으며, 오늘날에는 점보 제트 여객기의 엔진으로부터 석유화학설비, 제철제강설비, 섬유기계, 인쇄기계, 제지기계, 식품기계, 발전설비, 자동화부품, 전자제품 등에 이르기까지 각종 산업기계 및 제품 생산에 응용되고 있다. 특히 최근에는 이들 산업기계가 고속화, 고성능화, 고품질화됨에 따라 그 구성부품도 필연적으로 고성능의 내구성 등이 요구되어 세라믹 등 특수 코팅의 필요성이 절실히 요구되고 있다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.91-92
• /
• 2023

본 논문에서는 노후화된 화력발전소를 해체하고 원래의 자연환경으로 복원하는 공사가 진행되는 가운데 화력발전소 내 대형 철골구조물 중 하나인 터빈동을 발파해체공법을 적용하여 해체한 사례이다. 두께 30mm의 철골 부재를 절단하기 위해 금속제트가 발생되는 전용 장약용기를 제작하였으며, 철골 부재의 두께가 30mm 이상인 일부 철골 부재의 경우에는 가우징을 이용하여 사전취약화를 실시하였다. 또한 구조물 내부에 있는 일부 철골 부재에 대해 kicker charge를 사용하여 붕괴거동에 영향을 미치지 않도록 하였다. 발파에 사용한 전체 장약량은 175kg, 전자뇌관 165개, 장약용기 124개를 사용하여 계획된 방향으로 점진붕괴되었으며, 주변 시설물에 피해 없이 발파해체를 완료하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.574-581
• /
• 2015

In this paper, the effect of high voltage current pulse against shaped charge jet was analyzed through the visualization of jet behavior using flash X-ray and comparison of depth of penetration(DOP) into RHA(Rolled Homogeneous Armor) witness plates. The behavior of jet particles has been acquired using a flash X-ray equipment when current pulse was applied into the metal jet of a shaped charge(SC) warhead. Typical results such as jet breakup and radial jet dispersion, which are due to electromagnetic pressure by current pulse, have been obtained. Dozens of penetration experiments using a shaped charge with 55 mm diameter were performed according to various combinations of major parametric variables such as electrode spacing, standoff distance from SC warhead to electrode, and charge voltage. Subsequently, interrelations between major parametric variables and DOPs into RHA were analyzed.