• 보존과학연구
• /
• s.34
• /
• pp.20-29
• /
• 2013

Paper, textile and wood materials are mainly consisted of cellulose. Cellulose is high molecule and make up the strong crystalline structure by hydrogen bonds. In particular, the polymerization degree of cellulose are closely related to the strength of fiber, and the permanence. the useful life of fiber, also depends on the degradation of this substance. The viscosity of cellulose is considered to be an important indicator of fiber damage in high molecule polymers. The viscosity measurements with CED solution is used to measure the molecular weight and the degree of polymerization of cellulose. Cellulose viscosity of wood fibers is measured with TAPPI standard method T230. However, TAPPI standard method T230 is difficult to completely dissolving the cellulose of high molecular weight and large degree of polymerization, such as Korea traditional papers and fabrics made with mulberry, ramie, cotton fibers. In this study, The high viscosity of hanji and fabric was measured with TAPPI standard method T254. T254 method is that the cellulose specimen with the proper amount of weaker (0.167M CED) solution, and completely dissolved with the stronger (1.0M CED) solution. It was found that cellulose with high degree of polymerization was dissolved more easily in general CED method.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.838-850
• /
• 2015

In this study, dilute acid pretreatment was operated using small-diameter Quercus mongolica for evaluating the yield change of furfural and levulinic acid depending on pretreatment factors. The dilute acid pretreatment was conducted depending on reaction temperature ($140-180^{\circ}C$), reaction time (10-30 min), and sulfuric acid concentration (0-2%, w/w). Then, glucose, XMG (xylose + mannose + galactose), furfural, and levulinic acid contents in the liquid hydrolyzate were measured and analyzed after pretreatment. Glucose content increased to 16.02% as reaction temperature, reaction time, and sulfuric acid concentration increased, but it decreased at the sulfuric acid concentration of 2% (reaction temperature: > $170^{\circ}C$, reaction time: > 20 min). On the other hand, reaction temperature had a strong influenced on XMG content, and XMG content decreased to 1.63% through increasing of reaction temperature and sulfuric acid concentration, but XMG content was less affected by changes of reaction time. Furfural content increased with the increase of reaction temperature, reaction time, and sulfuric acid concentration, and maximum furfural content was 7.61% (reaction temperature: $180^{\circ}C$, reaction time: 20 min, sulfuric acid concentration: 1%) based on a weight of raw material, while furfural content was dropped in more severe condition than in maximum furfural content condition. Levulinic acid content also increased with higher reaction temperature, reaction time, and sulfuric acid concentration. Especially, the sharp increase of levulinic acid content was observed above $170^{\circ}C$, and maximum levulinic acid content was 10.98% (reaction temperature: $180^{\circ}C$, reaction time: 30 min, sulfuric acid concentration: 2%). However, less than 1% of furfural and levulinic acid content was obtained in non-acidic catalyst condition that in whole conditions of reaction temperature and reaction time.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.47-53
• /
• 1998

This study is to improve the diagnosis of diabetes mellitus and the self-monitoring of blood glucose in people with diabetes by providing a non-invasive method of monitoring blood glucose. A near-infrared (NIR) spectrophotometer was used to measure absorption spectra of 80 glucose samples ranges from 1 mg/dL to 200 mg/dL, and shows the standard error of prediction 1.8 mg/dL. Also, to investigate the effect of interference in blood, NaCl and sand were added in glucose and found the standard error of prediction of 2.8 mg/dL and 3.8 mg/dL, respectively. A new and more accurate calibration system for the spectrophotometer was developed from systematic study of light scattering, which cause nonlinear spectrophotometer response.

• The Korean Journal of Malacology
• /
• v.32 no.1
• /
• pp.45-54
• /
• 2016

To evaluate the applicability of cellular energy allocation (CEA) in the bivalves as a biomarker for the assessment of environmental contamination, the energy contents and energy consumption in several tissues of the Manila clam, Ruditapes philippinarum were analyzed. The contents of lipid, glucose, protein and electron transport system (ETS) activity in the foot, siphons, gills, and body of R. philippinarum exposed to crude oil-spiked sediments were measured at 1, 2, 4, 7, 10 days after exposure. The reserved energy (energy available, EA) in the lipid, glucose and protein decreased as contamination level and exposure time increased. In contrast, the ETS activity (energy consumed, EC) showed the reverse tendency. The order of available energy contents were foot > siphons > gill > body. Significant differences in both EA and EC were found only at the highest contamination level (58.3 mg TPAHs/kg DW). EA decreased significantly in the foot and gill at 1 day, in the body at 2 and 7 days after exposure. EC increased significantly in the body at 4 days after exposure. CEA showed higher sensitivity to the contamination than EA or EC. Especially, CEA in the foot and body decreased significantly at lower ranges of contamination level (as low as 6.5 mg TPAHs/kg DW) during 1 to 7 days after exposure. The CEA is more useful than EA or EC alone for the assessment of sediment contamination at lower level that acute toxicity could not be detected. CEA analyses in the body of R. philippinarum after 4 days' exposure to contaminated sediments seem to be the most sensitive and reliable.