• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.87-91
• /
• 2003

Experimental fishing was carried out to investigate the survival rate of fishes discarded after hauling from the trawl and to develop the fishing gear and method for fisheries management which can improve the survival rate of young fishes escaped from the trawl codend in offshore korean southern sea and off Cheju Island of Korea. The young fishes were bred in fish cage on the board to measure the sustainable survival time for fishes escaped from grid panel and codend. The obtained results are summarized as follows' 1. Japanese flying squid(Todarodes pacjficus), mitra squid(Loligo chinesis), hair-tail( Trichiurus lepturus), john dory(Zeus japonicus), spanish mackerel(Scomberomorus niphonius), redlip croaker (Pseudosciaena polyactis) and blackthroat seaperch(Doederliinia berycoides) were dead instantly after hauling. 2. Survival rate of tiger shark(Galeocerdo cuvier), conger eel (Conger myriaster), red skate (Dasyatis akajei), black scraper(Navodon modestus) and japanese fan lobster(Ibacus ciliatus) might be high after discarding because they survived for long hours in fish cage. 3. Blotched eelpout(Zoarces gili) escaped from the escapement device(grid) was dead within 6 hours in the water tank installed on the board but 97% of tiger shark and 72% of conger eel survived over 72 hours. 4. Red skate escaped from trawl codend was dead within 60 hours in the water tank installed on the board but sustainable survival time of 25% of octopus(Paroctopus dofleini) and 100% of black scraper was over 72 hours. 5. Compared with the survival rate of rosefish(Helicolenus higendorfi) escaped from the escapement device(grid) and trawl codend, all of the rosefish escaped from the grid was dead within 7.2 hours but 8.3% of the rosefish escaped from the codend survived over 72 hours. 6. In comparison with the survival rate of japanese fan lobster survived over 72 hours, survival rate of japanese fan lobster escaped the codend was much higher as 75% than 33% of japanese fan lobster escaped from the grid.