• Title/Summary/Keyword: 근사적 환경성평가

Search Result 31, Processing Time 0.025 seconds

Analysis of the Meterological Characteristics of Rainfall in Basin (유역 호우의 기상특성 분석)

  • Lee Sang Jin;Hwang Man Ha;Ko Ick Hwan;Lee Bae Sung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.599-604
    • /
    • 2005
  • 최근 일부 댐유역에서 게릴라성 집중호우와 태풍 등과 같은 특이 호우에 대하여 강우-유출분석을 실시한 결과 유출율이 $100\%$를 상회하는 경우가 발생함에 따라 효율적이고 안전한 치수 및 방재업무를 실시하는데 많은 어려움을 겪고 있다. 본 연구에서 일부 댐유역의 유출율이 $100\%$를 상회하는 원인으로 강우 관측자료의 신뢰성이 결여되어 나타나는 것으로 보았으며, 만일, 강우관측소에서 계측된 강우자료의 신뢰성이 결여 되어 있다면, 이로 인한 유역 강우의 추정오차는 제거될 수 없을 것이다. 일반적으로 강우관측소에서 발생하는 계측오차는 관측소의 고도, 지형적인 장애(산악영향, 지장물 등) 및 기상학적인 장애(기단의 이동방향, 호우의 발생원인, 돌풍 등) 등 외부적인 요인으로 인해 발생할 수 있다. 따라서, 본 연구에서는 강우관측소에서 발생하는 계측오차의 다른 여러 외부적 요인들 중 가장 큰 요인으로 돌풍과 같은 풍속에 의해 발생하는 것으로 판단하였고, 연구대상 유역인 임하댐 유역의 유출율과 치대 풍속간의 상관분석을 실시하였으며 분석결과 유출율은 최대 풍속에 커다란 영향을 받는 것으로 나타났다. 결국, 유출율이 $100\%$를 상회하는 호우에서 강우관측소의 강우는 강우시 돌풍과 같은 외부적인 요인으로 인해 적게 관측된 것으로 추정되며 저평가된 강우자료로부터 산정된 면적평균강우의 추정오차로 인해 유출율이 $100\%$를 상회하는 것으로 나타났다. 따라서 본 연구에서는 유출율과 풍속간의 관계로부터 강우보정계수 추정식을 산정하였으며, 추정된 보정계수를 이용하여 관측된 강우자료를 보정한 후 강우-유출분석을 실시한 결과 댐유입수문곡선을 보정전에 비해 보다 근사하게 모의하였다. 위해서는 대상유역에 적합한 선행 강우일수의 결정이 중요하리라 판단된다.인 분석을 수행하고, 배수갑문 개방에 의한 수질개선효과를 최대화하기 위한 환경관리 방안 제시에 중점을 두어 수행하였다.ncy), 환경성(environmental feasibility) 등을 정성적으로(qualitatively) 파악하여 실현가능한 대안을 선정하였다. 이렇게 선정된 대안들은 중유역별로 검토하여 효과가 있을 것으로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로

  • PDF

Numerical Formulation for Flow Analysis of Dredged Soil (준설토 유동해석을 위한 유한요소 수식화)

  • Shin, Hosung
    • Journal of the Korean GEO-environmental Society
    • /
    • v.15 no.3
    • /
    • pp.41-48
    • /
    • 2014
  • Experimental study of sedimentation and self-weight consolidation has been primary research area in dredged soil. However, good quality of the dredged soil and minimum water pollution caused by the pumping of reclaimed soil require intensive study of the flow characteristics of dredged material due to dumping. In this study, continuity and the equilibrium equations for mass flow assuming single phase was derived to simulate mass flow in dredged containment area. To optimize computation and modeling time for three dimensional geometry and boundary conditions, depth integration is applied to governing equations to consider three dimensional topography of the site. Petrov-Galerkin formulation is applied in spatial discretization of governing equations. Generalized trapezoidal rule is used for time integration, and Newton iteration process approximated the solution. DG and CDG technique were used for weighting matrix in discontinuous test function in dredged flow analysis, and numerical stability was evaluated by performed a square slump simulation. A comparative analysis for numerical methods showed that DG method applied to SU / PG formulation gives minimal pseudo oscillation and reliable numerical results.

Monte-Carlo Simulations of Non-ergodic Solute Transport from Line Sources in Isotropic Mildly Heterogeneous Aquifers (불균질 등방 대수층 내 선형오염원으로부터 기원된 비에르고딕 용질 이동에 관한 몬테카를로 시뮬레이션)

  • Seo Byong-min
    • Journal of Soil and Groundwater Environment
    • /
    • v.10 no.6
    • /
    • pp.20-31
    • /
    • 2005
  • Three dimensional Monte-Carlo simulations of non-ergodic transport of a lion-reactive solute plume by steady-state groundwater flow under a uniform mean velocity in isotropic heterogeneous aquifers were conducted. The log-normally distributed hydraulic conductivity, K(x), is modeled as a random field. Significant efforts are made to reduce tile simulation uncertainties. Ensemble averages of the second spatial moments of the plume and plume centroid variances were simulated with 1600 Monte Carlo runs for three variances of log K, ${\sigma}_Y^2=0.09,\;0.23$, and 0.46, and three dimensionless lengths of line plume sources normal to the mean velocity. The simulated second spatial moment and the plume centroid variance in longitudinal direction fit well to the first order theoretical results while the simulated transverse moments are generally larger than the first order results. The first order theoretical results significantly underestimated the simulated dimensionless transverse moments for the aquifers of large ${\sigma}_Y^2$ and large dimensionless time. The ergodic condition for the second spatial moments is far from reaching in all cases simulated, and transport In transverse directions may reach ergodic condition much slower than that in longitudinal direction. The evolution of the contaminant transported in a heterogeneous aquifer is not affected by the shape of the initial plume but affected mainly by the degree of the heterogeneity and the size of the initial plume.

Generation Method of Expression Space for Realtime Facial Expression Control of 3D Avatar (3차원 아바타의 실시간 얼굴표정제어를 위한 표정공간의 생성방법)

  • Kim Sung-Ho
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2006.06a
    • /
    • pp.109-111
    • /
    • 2006
  • 본 논문은 애니메이터로 하여금 얼굴 표정들의 공간으로부터 일련의 표정을 선택하게 함으로써 3차원 아바타의 표정을 실시간적으로 제어할 수 있도록 하기 위한 표정공간의 생성방법에 관하여 기술한다. 본 시스템에서는 약 2400여개의 얼굴 표정 프레임을 이용하여 표정공간을 구성하였다. 본 기법에서는 한 표정을 표시하는 상태표현으로 얼굴특징 점들 간의 상호거리를 표시하는 거리행렬을 사용한다. 이 거리행렬의 집합을 표정공간으로 한다. 그러나 이 표정공간은 한 표정이 다른 표정까지 이동할 때 두 표정간의 직선경로를 통해 이동할 수 있는 그런 공간이 아니다. 본 기법에서는 한 표정에서 다른 표정까지 거쳐 갈 수 있는 경로를 캡쳐된 표정 데이터로부터 근사적으로 유추한다. 우선, 각 표정상태를 표현하는 거리행렬간의 거리가 일정 값 이하인 경우 두 표정을 인접해 있다고 간주한다. 임의의 두 표정 상태가 일련의 인접표정들의 집합으로 연결되어 있으면 두 표정간에 경로가 존재한다고 간주한다. 한 표정에서 다른 표정으로 변화할 때 두 표정간의 최단경로를 통해 이동한다고 가정한다. 두 표정간의 최단거리를 구하기 위해 다이내믹 프로그래밍 기법을 이용한다. 이 거리행렬의 집합인 표정공간은 다차원 공간이다. 3차원 아바타의 얼굴 표정 제어는 애니메이터들이 표정공간을 항해할 때 실시간적으로 수행된다. 이를 도와주기 위해 표정공간을 차원 스케일링 기법을 이용하여 2차원 공간으로 가시화하였고, 애니메이터들로 하여금 본 시스템을 사용하여 실시간 표정 제어를 수행하게 했는데, 본 논문은 그 결과를 평가한다.참여하는 빈들 간의 관계를 분석하여 워크플로우에 대한 성능 측정이 가능하도록 한다. 또한 제안된 메트릭을 통하여 EJB 어플리케이션의 성능 향상을 도모할 수 있도록 한다.로 표면 위로 자라났고, 부종은 창상 밑 조직까지 감소하였으며, 육아조직은 교원질 섬유로 대체되었다. 창상 유발 21일 후, 다른 창상에 비해, HG 처치창은 유의적으로 창상 표면이 거의 재생성 상피로 덮였으며, 육아조직은 창상 유발 14일 후와 비교해서 유의적으로 교원질 섬유로 대체되었다. 위의 모든 결과에서 보듯이, 개에서 전층피부 창상의 처치 시 HG의 사용은 HC와 생리 식염수에 비해 창상치유 복구기의 치유 속도를 촉진하는 것으로 사료된다.시범학교의 자녀를 들 부모들은 환경관련문제에 대한 의식 및 환경관련 제품에 대한 구매행동의 변화가 두드러지게 나타났다.EX>$d^{2+}$ + SA처리구는 두 화합물의 이중 효과에 의해 전반적인 생리 활성을 억제하여, 결국에는 식물의 고사를 유도하는 것으로 사료된다.목에 대한 보안'이 가장 중요한 것으로 나타났다. 본 연구에서는 솔루션 선정요인에 관한 중요도를 e-마켓플레이스의 유형과 산업 별로 평가해보았는데, 여기에서 밝혀진 중요도를 통해 e 마켓플레이스를 구축하고 자 하는 기업은 솔루션을 자체 개발하거나 구입할 때 올바른 의사결정을 할 수 있다. 그리고 솔루션을 제공하려는 기업측면에서는 e-마켓플레이스를 구축하고자 하는 기업에게 유형과 산업별로 적절한 솔루션을 제공할 수 있다.순환이 뇌대사 및 수술 후 신경학적 결과에 보다 유익한 효과를 제공해 줄 수 있음

  • PDF

A New Congestion Control Algorithm for Vehicle to Vehicle Safety Communications (차량 안전 통신을 위한 새로운 혼잡 제어 알고리즘 제안)

  • Yi, Wonjae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.5
    • /
    • pp.125-132
    • /
    • 2017
  • Vehicular safety service reduces traffic accidents and traffic congestion by informing drivers in advance of threats that may occur while driving using vehicle-to-vehicle (V2V) communications in a wireless environment. For vehicle safety services, every vehicle must broadcasts a Basic Safety Message(BSM) periodically. In congested traffic areas, however, network congestion can easily happen, reduce the message delivery ratio, increase end-to-end delay and destabilize vehicular safety service system. In this paper, to solve the network congestion problem in vehicle safety communications, we approximate the relationship between channel busy ratio and the number of vehicles and use it to estimate the total network congestion. We propose a new context-aware transmit power control algorithm which controls the transmission power based on total network congestion. The performance of the proposed algorithm is evaluated using Qualnet, a network simulator. As a result, the estimation of total network congestion is accurately approximated except in specific scenarios, and the packet error rate in vehicle safety communication is reduced through transmit power control.

Verification of Stream Flow by Rainfall-Runoff Simulation and Hydrologic Analysis in Daecheong Basin (수문 특성 분석에 의한 대청유역 주요지점 유출모의 검증)

  • Lee, Sang-Jin;Kim, Joo-Cheol;Noh, Joon-Woo
    • Korean Journal of Ecology and Environment
    • /
    • v.43 no.2
    • /
    • pp.183-189
    • /
    • 2010
  • In this study long term rainfall-runoff model, developed based on SSARR, was applied to Geum river basin and its simulation results of major control points were compared with the corresponding observed channel discharges. The validities of the simulation results were examined with re-measured discharges of those control points. From the above procedure the points showing the unreliable results were found out and its principal causes are analyzed through hydrological inspection of runoff characteristics of their circumstances. Finally the simulation results were modified by the consideration of the effects by small-scale hydraulic structures which could directly affect the channel discharges. As a result the annual runoff simulations of two major points in Geum river basin, Yongdam and Daecheong dam sites, work well. However the low flow simulation of the point located between them, Sutong station, showed more or less the unreliable result. Its causes are considered by means of the hydraulic/hydrological inspection of the corresponding point.

Fiber Finite Element Mixed Method for Nonlinear Analysis of Steel-Concrete Composite Structures (강-콘크리트 합성구조물의 비선형해석을 위한 화이버 유한요소 혼합법)

  • Park, Jung-Woong;Kim, Seung-Eock
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.6A
    • /
    • pp.789-798
    • /
    • 2008
  • The stiffness method provides a framework to calculate the structural deformations directly from solving the equilibrium state. However, to use the displacement shape functions leads to approximate estimation of stiffness matrix and resisting forces, and accordingly results in a low accuracy. The conventional flexibility method uses the relation between sectional forces and nodal forces in which the equilibrium is always satisfied over all sections along the element. However, the determination of the element resisting forces is not so straightforward. In this study, a new fiber finite element mixed method has been developed for nonlinear anaysis of steel-concrete composite structures in the context of a standard finite element analysis program. The proposed method applies the Newton method based on the load control and uses the incremental secant stiffness method which is computationally efficient and stable. Also, the method is employed to analyze the steel-concrete composite structures, and the analysis results are compared with those obtained by ABAQUS. The comparison shows that the proposed method consistently well predicts the nonlinear behavior of the composite structures, and gives good efficiency.

Improved Modal Pushover Analysis of Multi-span Continuous Bridge Structures (다경간 연속 교량 구조물의 지진응답 평가를 위한 개선된 모드별 비탄성 정적 해석법에 관한 연구)

  • Kwak, Hyo-Gyoung;Hong, Seong Jin;Kim, Young Sang
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.3A
    • /
    • pp.497-512
    • /
    • 2006
  • In this paper, a simple but effective analysis procedure to estimate seismic capacities of multi-span continuous bridge structures is proposed on the basis of modal pushover analysis considering all the dynamic modes of structure. Unlike previous studies, the proposed method eliminates the coupling effects induced from the direct application of modal decomposition by introducing an identical stiffness ratio and an approximate elastic deformed shape. Moreover, in addition to these two introductions, the use of an appropriate distributed load {P} makes it possible to predict the dynamic responses for all kinds of bridge structures through a simpler analysis procedure. Finally, in order to establish the validity and applicability of the proposed method, correlation studies between rigorous nonlinear time history analysis and the proposed method are conducted for multi-span continuous bridges.

An Improved Reliability-Based Design Optimization using Moving Least Squares Approximation (이동최소자승근사법을 이용한 개선된 신뢰도 기반 최적설계)

  • Kang, Soo-Chang;Koh, Hyun-Moo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.1A
    • /
    • pp.45-52
    • /
    • 2009
  • In conventional structural design, deterministic optimization which satisfies codified constraints is performed to ensure safety and maximize economical efficiency. However, uncertainties are inevitable due to the stochastic nature of structural materials and applied loads. Thus, deterministic optimization without considering these uncertainties could lead to unreliable design. Recently, there has been much research in reliability-based design optimization (RBDO) taking into consideration both the reliability and optimization. RBDO involves the evaluation of probabilistic constraint that can be estimated using the RIA (Reliability Index Approach) and the PMA(Performance Measure Approach). It is generally known that PMA is more stable and efficient than RIA. Despite the significant advancement in PMA, RBDO still requires large computation time for large-scale applications. In this paper, A new reliability-based design optimization (RBDO) method is presented to achieve the more stable and efficient algorithm. The idea of the new method is to integrate a response surface method (RSM) with PMA. For the approximation of a limit state equation, the moving least squares (MLS) method is used. Through a mathematical example and ten-bar truss problem, the proposed method shows better convergence and efficiency than other approaches.

MAC Schemes for Best Effort Service in Wireless MAN: Design and Performance Analysis (무선 MAN에서 Best Effort 서비스를 위한 MAC 방식의 설계 및 성능 분석)

  • Park, Jin-Kyung;Shin, Woo-Cheol;Ha, Jun;Choi, Cheon-Won
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.11 s.353
    • /
    • pp.128-140
    • /
    • 2006
  • In the IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple services. Among the service classes supported between the base station and subscriber stations in the wireless MAN, the best effort service class is ranked on the lowest position in priority and is assisted by a MAC scheme based on reservation ALOHA. The wireless MAN standard, however, does not reveal every detail of the MAC scheme but only describes the skeleton of the MAC scheme. Focusing on the amount of resource that a subscriber demands by a request and the amount of resource that the base grants to a request we thus present a number of resource demand rules and resource grant rules. Also, we construct a candidate MAC scheme by implanting a pair of resource demand and grant rules into the skeleton of the MAC scheme. Meanwhile a difficult situation for the best effort service is expected wherein only scarce resource is available after most of the resource is already preempted by other services. Perceiving such a situation, we evaluate the throughput and delay performance of each candidate MAC scheme. Especially we develop an analytical method to approximately calculate the throughput in the saturated environment. From the numerical results, we observe that the candidate MAC scheme which adopts the non-gated exhaustive demand rule paired with the full grant rule attains superior performance at the expense of the fairness.