• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.222-230
• /
• 2013

Retinal bipolar cells according to the light stimulus respond to potential slowly, emit neurotransmitter release(glutamine acid) to depend on membrane potential. In this paper, the several physiological information on neurotransmitter release mechanism in the presynaptic terminal of the ON-type bipolar cells are incorporated into the formula model. The source of fast components and slow components of neurotransmitter release was arranged in parallel, this model was able to reproduce the membrane potential and intracellular $Ca^{2+}$ concentration dependence of neurotransmitter release faithfully. In addition, because the fast releasable components of neurotransmitter was represented by the membrane potential dependence of trapezoid type, whereas the slow releasable components was represented by the membrane potential dependence of a bell type, $Ca^{2+}$ concentration rise in intracellular is suppressed by $Ca^{2+}$ buffer to reduce slow releasable components, it was confirmed that the membrane potential dependence of neurotransmitter release was characteristics of a trapezoid type. And, in the light response of ON type bipolar cell, the result of the simulation of the neurotransmitter release caused by the components of transient and persistent was that the start of light response occurred the fast release of neurotransmitter, it was confirmed that the transient component and persistent component of the light response occurred the slow release. It was confirmed that the later of persistent component of the light response occurred due to the continuous release by synaptic vesicle supplemented from the storage pool.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.81-87
• /
• 1999

The purpose of this study was to determine the effect of electrical stimulation on the number of MCs and percent of degranulated MCs in rat skin. Twelve male Sprague-Dawley rats were divided into two group; electrical stimulation group (n=6) and control group (n=6). Each animals hair on the back was removed. The electrical stimulation group received an positive rectangular pulsed electrical stimulation, while the control group was given the same treatment without electricity. The biopsy specimens were fixed in formalin, embedded in paraffin and stained with toluidine blue-nuclear fast red and alcian blue-safranin O. respectively. The MCs were counted using a light microscope and computerized image analysis system and calculated as the density and the percent. A t-test showed a significantly higher density of MCs in the electrical stimulated rats than control rats(p<0.05), and the percent of degranulated MCs in the electrical stimulated rats was higher than in the control rats (p<0.05) in toluidine blue stained sections. The density of MCs was significantly higher in the electrical stimulated rats than the control rats in alcian blue-safranin O Stained sections (P<0.01). An analysis of variance showed that the densities of CTMCs was significantly lower than the densities of MMCs and mixed MCs in electrical stimulated rat in alcian blue-safranin O Stained sections (p<0.05). These results suggest that the electrical stimulation may have potential for increasing the number of MCs and lead to degranulate the MCs in rat skin.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.943-948
• /
• 2021

The purpose of this study was to investigate changes in surface dose due to increased scattering of gamma rays from patients injected with ^99mTc and ¹⁸F, which are radioactive isotopes, in close contact with materials with high atomic number such as the walls of the stable room. Prepare ^99mTc and ¹⁸F by injecting 20 and 10 mCi respectively into the NEMA phantom, and then measuring the surface dose for 60 minutes by positioning the phantom at a height of 1 m above the surface, at a distance of 0, 5 and 10 cm from the wall, and at the same location as the phantom facing the wall. Each experiment was repeated five times for reproducibility of the experiment and one way analysis of variability (ANOVA) was performed for significance testing and Tukey was used as a post-test. The study found that surface doses of 220.268, 287.121, 243.957, and 226.272 mGy were measured at ^99mTc, respectively, in the case of empty space and in the case of 0, 5 and 10 cm, while those of ¹⁸F were measured at 637.111, 724.469, 657.107, and 640.365 mGy, respectively. In order to reduce changes in surface dose depending on the patient's location while waiting, it is necessary to keep the distance from the ground or the wall where the patient is closely adhered to, or install an air mattress, etc., to prevent the scattered lines as much as possible, considering the scattered lines due to the wall etc. in future setup of the patient waiting room and safety room, and in addition to the examination, the external skin width may be reduced.

• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.219-228
• /
• 2018

This study measured the Physiological Equivalent Temperature (PET) of the hottest day time in a day, in order to verify the characteristics of human thermal comfort in case of heat wave during summer time in each region, by subdividing the urban areas in accordance with the climatic characteristics with the use of Local Climate Zone (LCZ) as a method of classifying the type of urban climate and the land cover map, targeting the Homaesil residential development district in Suwon. In the results of measurement, the forest and paddy field showed the moderate heat stress while the urban park showed the strong heat stress. Other developed areas showed the extreme heat stress. Such results show the possibility of institutional utilization for the improvement of human thermal comfort through the verification of climatic characteristics and differences in each type of urban areas, and the efficient placement of green infrastructure and the planning of land use to cope with the heat wave even in the planning stage for the establishment of urban planning.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.77-84
• /
• 2022

A submarine power cable is a transmission cable for carrying electric power below the surface of the water. Recently, submarine cables transfer power from offshore renewable energy schemes to shore, e.g. wind, wave and tidal systems, and these cables are either buried in the seabed or lie on the ocean floor, depending on their location. Since these power cables are used in the extreme environments, they are made to withstand in harsh conditions and temperatures, and strong currents. However, undersea conditions are severe enough to cause all sorts of damage to offshore cables, these conditions result in cable faults that disrupt power transmission. In this paper, we explore the design criteria for such cables and the procedures and challenges of installation, and cable transfer splicing system. The specification of submarine cable designed with 3 circuits of 154kV which is composed of the existing single circuit and new double circuits, and power capacity of 100MVA per cable line. The determination of new submarine cable burial depth and cable arrangement method with both existing and new cables are studied. We have calculated the permission values of cable power capacity for underground route, the values show the over 100MW per cable line.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.285-294
• /
• 2020

"The Man Standing Next" was a 'anger-character movie' that shows a fierce psychological game between the characters. Inspired by this point, it was analyzed the narrative structure of this film based on scene unit applying the 'Five-stage Anger Model' formulated by Lakoff and Kövecses and others. The results showed that the causality and feasibility of the protagonist's anger behavior were highly reflected above the model. In particular, among the five steps, the film-maker spent the longest time on 'anger control' justifying the hero's motivation for punishment or retaliation, while giving the shortest time to 'loss of control' to maximize the urgentness of the punitive actions. The detonator causing his anger at each stage was disposed two to six times each stage with neglect, contempt, arrogance, ostentation, mockery, unauthorized intervention, etc. Sneering of "Chief Security Officer" and insulting of "The President" make the protagonist feel the scorn of a terrible friend-murderer each functioned as a "rage trigger." In conclusion, the film follows the above sophisticated model in its narrative structure. Though it was a political drama that sets up a lot of anger scheme caused from public reasons, it reflects ordinary people's routine anger, which corresponds to 24 percent of the list of Nobaco's Provocation Inventory (PI). The producers elaborately reflected the anger procedure theory and balanced the public and private drivers of rage. It was considered to be derived from the intention to enhance communication with the audience increasing their understanding and aspiration for political movie that are usually heavy and unfamiliar.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.633-640
• /
• 2023

In this study, numerical analysis was performed based on field investigation to derive an appropriate reinforcement method by analyzing the displacement behavior characteristics of concrete blocks generated in the direct fixation track on the bridges of the serviced light rail transit. The track of this study was a direct fixation track on a sharp curved track, and the problem of movement of the concrete blocks installed on the bridge deck in the longitudinal and lateral directions occurred. In this study, based on the finite element model using 3D solid elements, the behavior of the direct fixation track that could be occurred under operating load conditions was analyzed. In addition, the reinforcement effect of various reinforcement methods was analyzed. As a result of analyzing the lateral displacement before and after reinforcement, it was analyzed that the maximum lateral displacement after reinforcement under the extreme lateral wheel loads significantly decreased to about 3% (about 0.1mm) compared to before reinforcement. In addition, as a result of examining the generated stress of the filling mortar, bridge decks, and reinforcing bar, it was analyzed that all of them secured a sufficient safety factor of 2.6 or higher, and the optimal conditions for the reinforcement method were derived. Therefore, it is judged that the number of anchoring reinforcements and symmetrical anchor placement reviewed in this study will be effective in controlling the occurrence of lateral displacement of concrete blocks and securing the structural integrity of bridges and concrete blocks.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.1-13
• /
• 2019

This study is to derive a design alternative to the FECC (Forest Experience Center for Children) that meets the preschooler's preferences. For this purpose, preschooler participation is included in each phase of the FECC, the site perception phase, the deriving design elements phase, and the deriving design alternative phase. In this study, the process of the deriving design alternative phase was carried out with kindergarteners and preschoolers (6, 7 years olds; all 41 students) at Songsan-mulbit FECC in Gwangsan-gu, Gwangju. In order to derive the design alternatives, three detailed design processes (preschooler participation 2 times, researcher analysis 1 time), tool construction, and a preschooler participation workshop were conducted. The results of this study are as follows. First, as a result of the preschooler's design process, 41 designs were drawn, and an average of 7.66 spaces were drawn by each preschooler. The 6-year-old males designed the least (average 6.80 spaces) and the 7-year-old females designed the most (9.0 spaces). The physical and adventure play spaces were most common (38.9% to 48.7%) regardless of gender or age. To analyze the feasibility of the preschooler's design using a base map, the appearance of the physical environmental characteristics (7 items) in the site were analyzed in each of the 41 designs. As a result, the environmental characteristics were apparent a total 72 times overall. Similar environmental characteristics appearing more than once were apparent in 87.8% (26 designs) of designs. Second, three design alternatives were derived: APS- types (intensive planning of active play facility spaces) was presented in 15 designs, NS-types (planning focused on nature spaces) was presented in 14 designs, and SPS-types (planning focused on static play facility spaces) were presented 12 designs. Third, NS-type, which were finally selected through a preference assessment (5-point scale) and a comparative assessment of the three alternatives, has mainly natural spaces (forest space, forest path, shelter, natural exploration space, and ecological pond) and active play facility spaces, water play space and soil (sand) play spaces was appropriately designed. Therefore, the NS-type was analyzed as the design alternative that can fully accomplish all types of cognitive development through developed through play (functional play, constructive play, dramatic(symbolic) play).

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.717-722
• /
• 2001

This paper presents a methodology on the backward path tracking control of a trailer type robot which consists of two parts: a tractor and a trailer. It is difficult to control the motion of a trailer vehicle since its dynamics is non-holonomic. Therefore, in this paper, the modeling and parameter estimation of the system using a real-coded genetic algorithm(RCGA) is proposed and a backward path tracking control algorithm is then obtained based on the linearized model. Experimental results verify the effectiveness of the proposed method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.3
• /
• pp.95-105
• /
• 1985

This dissertation presents an exact solution for the normal and shearing stresses of an orthotropic plane body loaded by a moment load. The solution satisfies the conditions of equilibrium compatibility equations concurrently and is governing for the body being in the elasto-plastic state. An Airy stress function is introduced to solve the problem related to an orthotropic half-infinite plane under a moment load. All the equations for orthotropy must be degenerated into the expressions for isotropy when orthotropic constants are replaced by isotropic ones. The author has evaluated all the equations of orthotropy and succeeded in obtaining exactly identical expressions to the equations of isotropy which were derived independently by of L'hosptials rule. The analytical results of isotropy are compared with the simple results of other investigator. Since moment Load under the elastic state and plastic state only is a particular case of moment load under the elasto-plastic state. All the equations of elasto-plastic state case are degenerated into the expressions for the each case. The formal solution is expressed in terms of closed form. The orthotropic constants are evaluated for two kinds and two different orientations of the grain of wood and two kinds of structures. The numerical results for orthotropy are evaluated for one kind and two different orientations of three-layered ply wood. The distribution of normal and shearing stresses are shown in figures. It is noted that the distribution of stresses of orthotropic materials depends on the type of materials and orientations of the grain and stiffening.