• Water for future
• /
• v.27 no.2
• /
• pp.63-72
• /
• 1994

In this study, hydraulic characteristics for upstream migration of fish in a pool-and-weir fishway were analyzed through experiment. The results showed that streaming flow was preferable to plunging flow for upstream migration of fish and it was not good to make an orifice beneath the septum since it generates turbulent jet and eddies. Protrusions on the side wall of fishway were preferable to grooves since they decelerate flow velocity and make upstream migration easy. A vertically movable septum was necessary for a flushing of deposited bed material, and net installing over fishway was also needed for birds not to approach the fishway and eat fish.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.1
• /
• pp.39-41
• /
• 2015

Swelling is a body's natural reaction to foot and ankle injury to mount a healing inflammatory response. To some degree, swelling is necessary for healing and is something that cannot be avoided following injury. However, post-traumatic swelling may have an adverse effect on wound healing and surgery can often be delayed due to preoperative swelling. We report on a unique technique of making multiple meshed stab incisions around the site of injury to reduce soft tissue swelling and promote wound healing.

• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2014

A wireless sensor network is being actively researched around the world that are connected to the mesh are a plurality of sensor nodes in a wireless manner that span different regions of the techniques. However, wireless communications use the limitation of resources, so it is very weak due to the properties of the network itself secure in comparison to the normal network. Wireless sensor network is divided into tapped-based attacks, forgery based attacks, denial of service attacks based largely by securities laws must defend against various attacks such as insertion of the wrong information being sent eavesdropping or modification of information, which is usually sensor network applications need to do. The countermeasure of sensor network attack is described in this research, and it will contribute to establish a secure sensor network communication.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.15-21
• /
• 1994

In the previous researches on mesh curve fairing method, a set of discrete data points in a mesh can be selected as variables. End tangent vectors can not be variables. This restriction makes some problems in preparing the end tangent vectors at the bow or stern parts, because their slopes are not infinites or zeros. In this paper end tangent vectors are included as variables and the more smooth results are obtained. Also two methods of constructing ship hull surface from mesh curves are examined. It is shown that the skinning method is better than non-uniform B-spline fitting method in representing the area near boundary. The generation of a ship surface is given as an example.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.36-40
• /
• 2018

We have developed a nonlithographic patterning technique using polystyrene nanoparticles to form nanonet channel structures which is promising for high-performance TFT applications. Nanoparticles assisted patterning (NAP) is a technique to form uniform nano-patterns by applying lift-off and dry etch process. Oxygen plasma treatment was used to control the diameters of nanonet hole size to realize a branch width down to 100 nm. NAP technology can be very promising to fabricate nanonet structure with advantages of lower manufacturing cost and large-area patterning capability.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.11-17
• /
• 2020

In this study, a new method for fabricating flexible transparent electrodes based on silver nanowire-polymer (AgNW-PEDOT:PSS) composite materials having a mesh pattern formed by a solution-based process without lithography was proposed. By optimizing conditions such as the amount of ultraviolet (UV) photosensitizer injected into the suspension of AgNW and PEDOT:PSS, UV exposure time, and deionized (DI) washing time, a clear and uniform mesh pattern was obtained. For the fabricated AgNW-PEDOT:PSS-based mesh-type electrodes, characteristics such as electrical sheet resistance, light transmittance, haze, and bending flexibility were analyzed according to the mixing ratio of AgNW and PEDOT:PSS included in the suspension. The fabricated mesh electrodes typically exhibited a low electrical sheet resistance of less than 20 Ω/sq while maintaining a high transmittance of 80% or more. In addition, it was confirmed from the results of analyzing the effect of PEDOT:PSS on the characteristics of the mesh-type AgNW-PEDOT electrode that the optical visibility was greatly enhanced by reducing the surface roughness and haze, and the bending flexibility was remarkably improved.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.317-317
• /
• 2023

수자원의 확보와 어류 서식 환경보전이라는 두 가지 측면은 수자원 이용이라는 목적하에 합의되기 어려운 문제를 가지고 있다. 점차적으로 수자원이 고갈되는 현시점에 효율적 물관리를 위해 최근에는 단절된 하천을 연결하기 위한 기술들이 개발되고 있으며, 이중 안정적인 물공급 시스템을 구축하기 위한 수중터널이 그러한 기술 중 하나이다. 수자원의 확보 측면에서는 의미가 있는 방법일 수 있으나 물리적으로 동떨어져 있던 서로 다른 환경을 연결하는 문제로 인한 부작용이 발생하는데 이중 외래어종 유입으로 인한 수중생물의 환경변화가 가장 큰 문제로 대두되고 있다. 이러한 문제를 방지하기 위해 어류의 이동을 차단하는 기술 또한 개발되고 있으며 그물망, 버블스크린, 빛, 소리를 이용한 다양한 방법을 통해 어류의 접근을 방지하고자 노력하고 있다. 본 연구에서는 이러한 차단시설 중 기포를 이용한 버블스크린과 관련하여 효율성을 높이기 위한 방법을 모색하고자 실제 버블의 상승속도에 영향을 미치는 여러 가지 불확실성 인자들에 대한 상관성과 인과관계를 검토하고자 하였다. 이를 위해서 외부적 원인에 대한 오차요소를 확인하고 결과값에 영향을 미치는 여러 가지 변수에 대하여 검토하고자 하는 실험연구를 수행하였다. 버블실험을 위한 수로는 길이 15m, 폭 1.5m 의 제원을 가지는 직선수로에서 수행하였으며, 버블 발생을 위한 튜브는 PVC 재질이며, 5cm 간격으로 1mm 직경을 갖는 파이프를 제작하여 활용하였다. 실험의 분석은 이미지를 이용한 방법을 사용하였으며 분석위치 및 버블사이즈 그리고 해석격자 크기에 대한 상관분석 및 회귀분석을 통해 각각 인자들과의 관계를 규명하고자 하였다.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.1
• /
• pp.1-15
• /
• 2005

In this paper, we deal with a mesh network design problem arising from the deployment of WDM for the optical internet. The mesh network consists of mesh topology for satisfying traffic demand while minimizing the cost of WDM, OXC, and fiber cables. The problem seeks to find an optimal routing of traffic demands in the network such that the total cost is minimized. We formulate the problem as a mixed-integer programming model and devise a tabu search heuristic procedure. Also we develop an optical internet design system that implements the proposed tabu search heuristic procedure. We demonstrate the computational efficacy of the proposed algorithm, compared with CPLEX 8.0.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.75-81
• /
• 1989

In this paper, the authors describe on the field experiment of the newly designed actual stow net, standing on the result of the model experiment to examine the performance of the conventional net and the newly designed net, presented in two previous reports of this series. Concurrently the additional experiment to find out the possibility of changing of operating system from the side to the stern was carried out. 1. Fundamental shape of the experimented net was 20 times aslarge asthe newly designed model net. Performance of the net was detected by using two ultrasonic echo sounders: one was set downward at the top-most spreader of the shearing device to detect the opening height of the device from the sea bed, and the other sidewise at the starboard top-most spreader to detect the top-most opening width of the devices. Opening height of the newly designed net showed about 3m smaller than the conventional net at slow current of 0.6m/sec and less but it overcome 1m at speedy current of 0.8m/sec and more. Opening width of the newly designed net was 1.4 times as large as that of the conventional net, ant the front projection area of the newly designed net mouth was estimated as 1.3~1.6 times as large as that of the conventional net. 2. The experiment on the stern operating system was tightly limited by the structure of the ship employed in the experiment, which was a stern trawler of 2275 GT. The ship confronted by the wind with main anchor, while the net was put over the stern slipway and the hauling line of shearing device was operated through the top rollers of gallows. The experiment was very suggestive in the view point to mechanize the operating system, and so to decrease the man power except the following question. The of bow-stern line of ship, and that of net is much different.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.1
• /
• pp.6-11
• /
• 1989

Some distinctive defects in the conventional stow net were examined and presented in the previous report of this series. To find out the more effective gear by correcting the defects, the authors carried out another experiment by using a newly designed gear. 1. Special features of the newly designed gear are: (1) stretched width of front end on top, bottom and side panel are decreased 20%, on the other hand, the frank of the panels are increased 10% compared with the conventional gear. Front end of top and bottom panels are bias cutten up to 20% of the length of panels. (2) Length of the head rope and ground rope are shortened 6% by changing of the shape of the top and bottom panels. (3) Lacing lines are attached to four longitudinal seaming lines with suitable hanging ratio. (4) Stretched height of the shearing device were shortened 17%, and the buoyancy on top of the device were increased 20%. (5) Length of the biforked pendants were arranged to be shorter on top-most and bottom-most ones, and loner on middle ones. 2. The observed result can be expressed as (1) Wrinkles in the front end of top panels are removed and fringe line of panels become smooth. (2) Opening height of mouth is observed 3% higher than that of the conventional gear. (3) Opening width is 1.5 to 1.6 times wider than that of the conventional gear. (4) Hydrodynamic resistance is decreased 10%-17%.