• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.41-56
• /
• 2021

The characteristics of the six rock cleavages(R1~H2) in Jurassic Hapcheon granite were analyzed using the distribution of ① microcrack lengths(N=230), ② microcrack spacings(N=150) and ③ Brazilian tensile strengths(N=30). The 18 cumulative graphs for these three factors measured in the directions parallel to the six rock cleavages were mutually contrasted. The main results of the analysis are summarized as follows. First, the frequency ratio(%) of Brazilian tensile strength values(kg/㎠) divided into nine class intervals increases in the order of 60~70(3.3) < 140~150(6.7) < 100~110·110~120(10.0) < 90~100(13.3) < 80~90(16.7) < 120~130·130~140(20.0). The distribution curve of strength according to the frequency of each class interval shows a bimodal distribution. Second, the graphs for the length, spacing and tensile strength were arranged in the order of H2 < H1 < G2 < G1 < R2 < R1. Exponent difference(λS-λL, Δλ) between the two graphs for the spacing and length increases in the order of H2(-1.59) < H1(-0.02) < G2(0.25) < G1(0.63) < R2(1.59) < R1(1.96)(2 < 1). From the related chart, the six graphs for the tensile strength move gradually to the left direction with the increase of the above exponent difference. The negative slope(a) of the graphs for the tensile strength, suggesting a degree of uniformity of the texture, increases in the order of H((H1+H2)/2, 0.116) < G((G1+G2)/2, 0.125) < R((R1+R2)/2, 0.191). Third, the order of arrangement between the two graphs for the two directions that make up each rock cleavage(R1·R2(R), G1·G2(G), H1·H2(H)) were compared. The order of arrangement of the two graphs for the length and spacing is reverse order with each other. The two graphs for the spacing and tensile strength is mutually consistent in the order of arrangement. The exponent differences(ΔλL and ΔλS) for the length and spacing increase in the order of rift(R, -0.08) < grain(G, 0.14) < hardway(H, 0.75) and hardway(H, 0.16) < grain(G, 0.23) < rift(R, 0.45), respectively. Fourth, the general chart for the six graphs showing the distribution characteristics of the microcrack lengths, microcrack spacings and Brazilian tensile strengths were made. According to the range of length, the six graphs show orders of G2 < H2 < H1 < R2 < G1 < R1(< 7 mm) and G2 < H1 < H2 < R2 < G1 < R1(≦2.38 mm). The six graphs for the spacing intersect each other by forming a bottleneck near the point corresponding to the cumulative frequency of 12 and the spacing of 0.53 mm. Fifth, the six values of each parameter representing the six rock cleavages were arranged in the order of increasing and decreasing. Among the 8 parameters related to the length, the total length(Lt) and the graph(≦2.38 mm) are mutually congruent in order of arrangement. Among the 7 parameters related to the spacing, the frequency of spacing(N), the mean spacing(Sm) and the graph (≦5 mm) are mutually consistent in order of arrangement. In terms of order of arrangement, the values of the above three parameters for the spacing are consistent with the maximum tensile strengths belonging to group E. As shown in Table 8, the order of arrangement of these parameter values is useful for prior recognition of the six rock cleavages and the three quarrying planes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06c
• /
• pp.28-30
• /
• 2006

XML 문서의 유사성을 비교하는 연구는 XML 문서의 저장 및 검색에 유용하기 때문에 많은 연구가 진행되었다. XML 문서의 유사성 연구는 크게 edit-distance를 이용하는 방법, 문서의 그래프 모델을 이용하는 방법, 문서의 매트릭스 모델을 이용하는 방법 등이 있다. 최근에는 문서를 encoding 하고 푸리에 변환을 이용하는 방법이 보고되었다. 본 논문에서는 XML 문서를 함수로 변환하고 FFT를 적용하여 문서의 구조적 유사성을 비교하는 새로운 방법을 제안한다. 제안하는 방법은 JAXP로 구현하였으며 XML 문서의 구조를 분석하여 함수로 변환하였다. 그리고 함수에 FFT를 적용하여 XML 문서의 구조적 유사성을 비교하였다. FFT 비교 결과는 XML 문서의 함수 변환이 적합한 것임을 보여주었으며 비교 결과는 예상된 결과를 보여주었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.26-35
• /
• 2006

Design parameters of manned and unmanned rotorcrafts have been investigated to construct a design database and to derive trend curves. Design parameters of 78 manned rotorcrafts and 33 unmanned rotorcrafts have been collected and analyzed using linear regression method. Six kinds of trend curves equations are derived. Most of trend curves derived are relatively meaningful according to the calculated correlation and determination coefficients. The comparisons between manned and unmanned rotorcraft characteristics are performed. It has been drawn according to the comparisons that unmanned rotorcraft has smaller main rotor diameter and maximum take-off weight, bigger tail rotor size and similar level of empty weight fraction than manned rotorcraft.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.499-506
• /
• 2019

This paper is concerned with the operating stability of 7kW inverter using SIC hybrid module and verifies the validity of the simulation results by comparing the result of the loss equation and the simulation result, Simulation results using Si module and SiC hybrid module are compared to compare switch loss and diode loss. Through the loss equation calculation, the conduction loss of SiC Hybrid module is 168W, switching loss is 9.3W, diode loss is 10.5nW, When compared with the simulation results, similar values were shown. As a result of comparing the simulation results of the Si module and the SiC Hybrid module, The total device loss of the Si module was 246.2W, and the total device loss of the SiC Hybrid module was 189.9W. The loss difference was 56.3W, which was about 0.8W. thereby verifying the reverse recovery characteristics of the SiC SBD. In addition, temperature saturation test was conducted to confirm the stability of SiC Hybrid module and Si module under high temperature saturation, In the case of the Si module, the output power was stopped at 4kW, and the SiC Hybrid module was confirmed to operate at 7kW. Based on this, an efficiency graph and a temperature graph are presented, and the Si module is graphed up to 4kW and the SiC Hybrid module is graphed up to 7kW.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.565-571
• /
• 2008

Due to rapid development of bioinformatics technologies, various biological data have been produced in silico. So now days complicated and large scale biodata are used to accomplish requirement of researcher. Developing visualization and annotation tool using them is still hot issues although those have been studied for a decade. However, diversity and various requirements of users make us hard to develop general purpose tool. In this paper, I propose a novel system, Genome Viewer and Annotation tool (GenoVA), to annotate and visualize among genomes using known information and multiple relation graph. There are several multiple alignment tools but they lose conserved area for complexity of its constrains. The GenoVA extracts all associated information between all pair genomes by extending pairwise alignment. High frequency conserved area and high BLAST score make a block node of relation graph. To represent multiple relation graph, the system connects among associated block nodes. Also the system shows the known information, COG, gene and hierarchical path of block node. In this case, the system can annotates missed area and unknown gene by navigating the special block node's clustering. I experimented ten bacteria genomes for extracting the feature to visualize and annotate among them. GenoVA also supports simple and rough computational annotation of new genome.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.125-126
• /
• 2018

본 논문에서는 원통형 NCA 리튬이온 배터리로 제작된 고출력 직렬조합 배터리팩으로 C-rate에 따른 전기적 특성 실험을 수행하였다. 방전 용량 프로파일 실험을 통해 배터리팩의 충/방전 C-rate가 배터리팩의 내부 파라미터에 어떠한 영향을 주는지 비교 분석한다. 실험을 통해 방전 용량과 전압 편차 파라미터를 측정한다. 전압 편차 그래프는 만방 구간과 만방 이후 휴지 구간의 셀 간 전압 편차를 중심으로 관찰하며 두 구간의 전압 편차를 비교한다. 3가지 파라미터를 비교하여 가장 효율적인 C-rate를 알아보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1196-1198
• /
• 2013

행위 패턴은 사람의 행위들이 수행되는 양식으로 성향, 습관, 건강상태 등에 따라 다르게 나타나는 생활양식이다. 헬스케어, 마케팅, 정책 결정 등과 같은 다양한 분야에서 사람의 행위패턴을 활용하고 있다. 행위 패턴을 분석하기 위한 방법으로 행위 패턴들을 비교하는 연구가 진행되고 있다. 기존의 행위 패턴 비교 기법은 구조적 정보만을 반영하여 정확도가 저하되는 문제점이 발생한다. 본 논문에서는 두 행위 그래프를 효과적으로 유사도를 정확하게 비교하기 위하여 구조적 정보와 행위 간의 의미적 유사성을 동시에 반영한다. 실험을 통하여 기존의 기법보다 약 4% 정확도가 향상됨을 보인다.

• Annual Conference on Human and Language Technology
• /
• 2021.10a
• /
• pp.592-596
• /
• 2021

레코드 연결의 대표적인 문제 중 하나는 레코드 간 비교 비용이 크다는 것이다. 이러한 문제를 해결하기 위해서는 레코드 연결에 필수적으로 블로킹 단계가 포함되어야 한다. 블로킹이란 같은 레코드일 가능성이 높은 대상들을 그룹화하여 비교연산을 수행할 대상을 선정하는 단계를 말한다. 블로킹의 목적은 최대한 결과의 recall을 희생시키지 않으면서 비교 연산 횟수 최소화하는 것이다. 메타 블로킹은 가중치 그래프를 블로킹에 적용함으로써 전통적인 블로킹 방식의 한계를 극복하고 더 좋은 성능을 나타내는 모델이다. 본 논문에서는 메타블로킹에서 주목하지 않았던 블록 생성방식을 데이터베이스 속성에 따라 블록을 생성하는 방식으로 개선하고 그에 맞는 가중치 계산식을 제안하였다. 또한 키 기반 블로킹, 메타블로킹, 속성인지 메타블로킹으로 생성된 블로킹 결과에 대한 성능을 측정 및 비교하였다.

• Journal of KIISE:Software and Applications
• /
• v.35 no.9
• /
• pp.572-587
• /
• 2008

The Self-organizing Feature Map(SOFM) that is one of unsupervised neural networks is a very powerful tool for data clustering and visualization in high-dimensional data sets. Although the SOFM has been applied in many engineering problems, it needs to cluster similar weights into one class on the trained SOFM as a post-processing, which is manually performed in many cases. The traditional clustering algorithms, such as t-means, on the trained SOFM however do not yield satisfactory results, especially when clusters have arbitrary shapes. This paper proposes automatic clustering on trained SOFM, which can deal with arbitrary cluster shapes and be globally optimized by graph cuts. When using the graph cuts, the graph must have two additional vertices, called terminals, and weights between the terminals and vertices of the graph are generally set based on data manually obtained by users. The Proposed method automatically sets the weights based on mode-seeking on a distance matrix. Experimental results demonstrated the effectiveness of the proposed method in texture segmentation. In the experimental results, the proposed method improved precision rates compared with previous traditional clustering algorithm, as the method can deal with arbitrary cluster shapes based on the graph-theoretic clustering.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.2
• /
• pp.37-47
• /
• 2011

In the recent years, malicious codes called malware are having shown significant increase due to the code obfuscation to evade detection mechanisms. When the code obfuscation technique is applied to malwares, they can change their instruction sequence and also even their signature. These malwares which have same functionality and different appearance are able to evade signature-based AV products. Thus, AV venders paid large amount of cost to analyze and classify malware for generating the new signature. In this paper, we propose a novel approach for detecting metamorphic malwares. The proposed mechanism first converts malware's API call sequences to call graph through dynamic analysis. After that, the callgraph is converted to semantic signature using 128 abstract nodes. Finally, we extract all subgraphs and analyze how similar two malware's behaviors are through subgraph similarity. To validate proposed mechanism, we use 273 real-world malwares include obfuscated malware and analyze 10,100 comparison results. In the evaluation, all metamorphic malwares are classified correctly, and similar module behaviors among different malwares are also discovered.