• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.55-64
• /
• 1989

A procedure which may be useful in dealing with problems of half plane is considered. Boundary elements are combined with nonlinear finite elements to facilitate their merits. Boundary elements for semi-infinite region are composed using the Melan's solution for half plane. Nonlinear finite elements are used to model irregularity or nonhomogeneity of elasto-plastic materials, which is usual in underground structures. In order to verify the procedure, a shallow tunnel under internal pressure is analysed using the nonlinear finite element method and combined method. It is shown that the developed procedure is accurate enough compared with other method.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.167-174
• /
• 1993

Limited geochemical components have been detected in fluid inclusions from ore deposits in south Korea by non-destructive and destructive analytical methods. Review of fluid inclusion studies display that the homogenization temperatures and salinities are in direct proportion. W and Cu ore deposits tend to show higher homogenization temperatures and salinities than Au ore deposits. Abundant halite-bearing fluid inclusions from the Eonyang Granite producing precious amethyst crystals may indicate that the initial fluid originated from magma is highly saline as shown by the quartz from the granite. Raman Laser microprobe detected $CO_2$, $N_2$ and $CH_4$ in a gold deposit, while these components are hardly detected from other deposits, even though destrucive analysis has dectected $CO_2$, $N_2$, $CH_4$, $H_2S$, and $SO_2$ from most of ore deposits. Individual fluid inclusion shows quite different components. These results suggest that large numbers of fluid inclusions should be analysed by Raman Laser microprobe to gain reliable data. Halite-bearing inclusion is hardly found in fluid inclusions from epithermal gold deposits in south Korea. Geochemistry, homogeinzation temperature and salinity of fluid inclusions may be useful to apply for exploration to find a concealed orebody.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.1064-1065
• /
• 2020

본 연구는 한국인 뇌MRI영상을 이용하여 대뇌 영역별 분석 프로토콜과 정량 평가방법을 개발하여 정상인을 대상으로 뇌용적량을 정량 분석하고자 한다. 뇌MRI영상 분석 프로토콜을 최적화하기 위해 먼저 뇌용적 변화에 있어 평가방법을 선정하고, VBM 후처리과정은 MRI영상 신호불균질성 교정, 조직세분화 방법, 대뇌 표준영상 제작, 신호 편평화(smoothing) 과정을 단계별로 최적화하였다. 이 정량분석 프로토콜은 정상인과 뇌질환 환자의 뇌용적 비교뿐만 아니라 환자 약물 치료 전·후에 나타나는 용적 변화를 정량적으로 평가하는 연구에 활용할 수 있을 것으로 기대한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1514-1519
• /
• 2019

IVUS is an intra-operative imaging modality that facilitates observing and appraising the vessel wall structure of the human coronary arteries. IVUS is regularly used to locate the atherosclerosis lesions in the coronary arteries. Auto-segmentation of the vessel structure is important to detect the disorder of coronary artery. In this paper, we propose a simple strategy to extract Intima/Adventitia area effectively using fuzzy binarization from intravascular images. The proposed method apply fuzzy binarization to find the adventitia but apply average binarization to locate the intima since they have different homogeneity of pixel intensity comparing with the environment. In this paper, we demonstrate an effective auto-segmentation method for detecting the interior/exterior of the vessel walls by differentiating the fuzzy binarization result and average binarization result from IVUS image. Important statistics such as Intima-Media Thickness (IMT) or volume of a target area can be easily computed from result.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.251.1-251.1
• /
• 2010

바이오디젤은 동식물성 기름과 메탄올의 트랜스에스테르화 반응에 의해 생산되는 지방산메틸에스테르(FAME, fatty acid methyl esters)로서, 트랜스에스테르화 공정에는 KOH, NaOH, $NaOCH_3$등의 균질계 화학촉매를 이용한 방법, 무촉매 공정인 초임계 메탄올 이용 방법, 그리고 효소촉매를 이용한 방법이 있다. 초임계 공정은 에너지 소비와 장치비가 커서 경제성이 떨어지는 것으로 보고되며 화학촉매 공정은 반응 효율이 높다는 장점을 가지고 있지만, 반응 및 정제단계가 복잡하고 정제과정에 폐수를 발생시키는 문제점을 가지고 있다. 고정화 효소를 사용하는 효소 공정은 에너지 비용의 절감, 후 처리 공정의 단순화, 고 순도의 글리세롤을 얻을 수 있는 장점이 있지만, 반응 속도가 느리고 효소 가격이 비싸다는 단점이 있어 현재까지 상업화되지 못하고 있다. 반응속도가 높고 재사용이 가능한 효소 촉매 공정 개발을 위해 본 연구에서는 Candida rugosa, Rizhopus oryzae 2종을 실리카에 동시 고정화하였다. 고정화 Lipase의 제조는 실리카겔을 과산화수소를 이용하여 전처리를 하고 Acetone과 3-APTES의 혼합용액을 첨가한 후 실리카겔과 (silanization)을 진행 하였다. 그리고 glutaraldehyde를 첨가 하여 공유 결합을 형성 한 후에 증류수를 사용하여 실리카겔을 회수하여 lipase(Rizhopus oryzae, Candida rugosa 10% 용액)를 고정화 하였다. 고정화 효소의 효소 활성을 측정한 결과 3000-3500 Unit(${\mu}mol/g{\cdot}min$)으로 측정되었다. 제조된 고정화 효소를 이용하여 Canola Oil을 바이오디젤로 전환하는 실험을 진행하였으며 생성물로부터 고정화 효소를 분리한 후에 상층의 에스테르층을 취하여 수세한 뒤 원심분리하여 FAME 함량을 측정한 결과 83%의 바이오디젤을 얻을 수 있었다. 그리고 효소 촉매 트랜스에스테르화 반응의 Enzyme, Water, Methanol 투입량의 반응 변수들에 대하여 반응표면분석법(Response Surface Methodology)을 적용하여 최적 반응조건을 도출하는 연구를 수행하였다.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.155-167
• /
• 2010

In analysis of slope stability, deterministic analysis which yields a factor of safety has been used until recently. However, probability of failure is considered as a more efficient method because it deals with the uncertainty and variability of rock mass. In both methods, a factor of safety or a probability of failure is calculated for a slope although characteristics of rock mass, such as characteristics of joints, weathering degree of rock and so on, are not uniform throughout the slope. In this paper, we divided a model slope into several zones depending on conditions of rock mass and joints, and probabilities of failure in each zone are calculated and compared with that calculated in whole slope. The persistence of joint was also used as a parameter in calculation of probability of failure. A rock slope located in Hongcheon, Gangwondo was selected and the probability of failure using zoning and persistence as parameter was calculated to confirm the applicability of model analysis.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.316-321
• /
• 2010

The efficacy of the ozonated water (0.1, 0.2, 0.4, 0.6, and 1.0 ppm) in reducing the risk of food-borne disease was investigated in this study. After inoculation of Listeria monocytogenes (ATCC 19112), Salmonella enterica subsp. enterica biovar Typhimurium (ATCC 12598), Escherichia coli O157:H7 (ATCC 43890) to lettuce, spinach, and beef, inhibition effect with different washing concentrations, time, and methods with ozonated and tap water were evaluated. As a result, there were 2.16 to 3.85 log CFU/mL reduction in different foods and 7 log CFU/mL reduction on cutting boards after watering with ozonated water. Higher than 0.2 ppm of ozonated water treatment reduced the growth of food-borne disease bacteria with increasing washing time and ozone concentration. These results suggested that the ozonated water treatment effectively improved the microbiological quality and food safety.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.902-907
• /
• 2000

Protamine-strong basic protein was prepared from salmon(chum salmon, Oncorhynchus keta) sperm by several pretreatment method. And there were determined yield, amino acid composition, antimicrobial and antioxidant activity of protamine on each pretreatment condition. The yield of protamine was different according to pretreatment, and ultrasonicating, homogenizing and microwaving pretreatment were about 16.0%, 15.5% and 10%, respectively. The main amino acid of P60(microwaving pretreatment for 10 min at $80^{\circ}C$) and UU6(ultrasonicating pretreatment for 60 min at $20^{\circ}C$) were arginine, proline and tryptophan, and arginine content of P60 and UU6 were 61%, 53%, respectively. On the other hand, main amino acid of M(homogenizing pretreatment by mixer) were methionine, proline and arginine, the content were 34%, 28% and 11%, respectively. Also MC(homogenizing pretreatment with $H_{2}SO_{4}$ soln. by mixer) was very different with P60, UU6 and M, the content of MC were proline 44.8% and arginine 39.7%. Prepared protamines showed antimicrobial activity to several gram(+) and gram(-) strain. In particular, the UU6 and P60 protamine has strong antimicrobial activity to Bacillus subtilis and Escherichia coli, and the activity was increased with concentration increasing. Regardless of pretreatment method, all protamine showed antioxidant activity and the $EDA_{50}$ of P60, UU6, M and MC were $101\;{\mu}g/mL$, $410\;{\mu}g/mL$, $523\;{\mu}g/mL$ and $490\;{\mu}g/mL$, respectively.