• 제목/요약/키워드: 균제도

검색결과 281건 처리시간 0.033초

유산균제제(乳酸菌製劑)의 제조공정(製造工程)에 따른 안정성(安定性)

  • 황정섭
    • Journal of Pharmaceutical Investigation
    • /
    • 제3권3호
    • /
    • pp.51-58
    • /
    • 1973
  • It is well known that lactobacillus products are a living bacterial preparation, which acts as the antibacterial and antidiarrhea agents. Beause of the specificity as the living bacterial preparation, this preparation should be remarkably considered to the stabilities in its manufacturing process and storage more than any others. In this report, it has been considered about its stabilities as the following items. 1) Selection of strains. 2) Control of seed strains. 3) Cultivation and its conditions. 4) Dry of microorganisms. 5) Manufacture of products. 6) Products storage. 7) Concerning to administration.

  • PDF

PET, PTT 경편성물의 역학적 특성치 비교 (Comparison of Mechanical Properties between PET and PTT Warp Knitted Fabrics)

  • 정현기;윤혜신;박신웅;강복춘
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.287-288
    • /
    • 2003
  • 경편성 분야는 생산 특성상 소재 원사가 균제하고 강도가 높아야 하므로 주로 사용할 수 있는 원사가 폴리에스테르, 나일론 등의 합섬 필라멘트사에만 주로 한정되어, 새로운 소재를 찾기 위해 노력 해왔다. 그러므로 경편성은 PTT 원사를 대량으로 소비할 수 있는 잠재적인 가장 큰 시장이다. 그러나 PTT를 경편성의 소재로 사용하여 새로운 수요를 창출하기 위해서는 PTT 경편성물과 기존 합성 필라멘트를 소재로 한 경편성물의 물성과 태의 차이가 우선 파악되어야 하며, 정경, 편성 및 형태안정 과정(relaxation)에 관한 연구도 진행하여 새로운 소재에 알맞은 공정 조건이 설정되도록 해야 한다. (중략)

  • PDF

유동계 내 집속체의 과도적 거동에 따른 출력 불균제 해석 (Analysis of Output Irregularity from the Transient Behavior of Bundle in a Flow Field)

  • 허유;김종성
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.965-968
    • /
    • 2005
  • Roll drafting operation causes variations in the linear density of bundles because the bundle flow cannot be controlled completely by roll pairs. Defects occurring in this operation bring about many problems successively in the next processes. In this paper, we attempt to analyze the draft dynamics and the linear density irregularity based on the governing equation of a bundle motion that has been suggested in our previous studies. For analyzing the dynamic characteristics of the roll drafting operation, it is indispensable to investigate a transient state in time domain before the bundle flux reaches a steady state. However, since governing equations of bundle flow consisting of continuity and motion equations turn out to be nonlinear, and coupled between variables, the solutions for a transient state cannot be obtained by an analytical method. Therefore, we use the Finite Difference Method(FDM), particularly, the FTBS(Forward-Time Backward-Space) difference method. Then, the total equations system yields to an algebraic equations system and is solved under given initial and boundary conditions in an iterative fashion. From the simulation results, we confirm that state variables show different behavior in the transient state; e.g., the velocity distribution in the flow field changes more quickly the linear density distribution. During a transient flow in a drafting zone, the output irregularity is influenced differently by the disturbances, e.g., the variation in input bundle thickness, the drafting speed, and the draft ratio.

  • PDF

축구 경기장의 조명타워 위치에 따른 조도분포 해석 (Illuminance Distribution Analysis by Lighting Tower Position of o Soccer Stadium)

  • 김길영;최홍규;최병숙
    • 조명전기설비학회논문지
    • /
    • 제18권1호
    • /
    • pp.1-8
    • /
    • 2004
  • 오늘날 축구는 세계적인 주목을 받는 스포츠가 되었다. 특히, 2002 KOREA-JAPAN 월드컵은 한국에 대한 깊은 인상을 심어 주었다. 축구경기장의 조명시스템 설계에 있어서 가장 주요한 기술적 목적은 경기장의 어디에서나 최적의 분포를 나타내도록 하는 것이다. 이렇듯, FIFA는 경기장의 어디에서나 선수, 청중, 방송관계자등에게 일정한 수준의 조도를 제공할 수 있도록 규정하고 있다. 본 논문에서는 경기장의 조명타워의 위치선정에 따른 최적의 수평면 조도와 수직면 조도를 찾기 위한 알고리즘을 제시하였다. 본 논문에서는 Philip's Calculux 프로그램을 이용하여 조명타워의 위치에 따라 수평면 조도, 수직면 조도, 균제도, 글레어 등을 계산하였다.

도로터널에서 최적의 조명기구 위치 연구 (The Study of the Most Suitable Location of Luminaire for Road Tunnel Lighting System)

  • 한완모;장우진;이인환
    • 조명전기설비학회논문지
    • /
    • 제18권4호
    • /
    • pp.1-7
    • /
    • 2004
  • 우리나라의 지형은 많은 산들로 이루어져 있으며 최근에는 교통량의 증가와 물류비용의 절감 등의 목적으로 많은 터널이 건설되고 있다. 터널에서의 조명은 안전한 도로조건을 만들기 위한 가장 중요한 설비이다. 과거에는 조명기구를 벽면에 설치하였으나 최근에는 천장에 설치하고 있으며 조명기구를 천장에 설치하더라도 어느 위치에 설치하여야 적절한지를 알 수가 없어 설계자의 임의로 설계를 하고 있는 실정이다. 이런 문제를 해결하고자 풍부한 경험과 정확한 데이터를 가지고, Lightscape program을 사용하여 계산 및 시뮬레이션을 시행하여 적정한 위치를 연구 검토하였다. 검토결과 조명기구를 벽면에 설치하는 것보다 천장에 설치하는 것이 균제도가 균일하고 조명률이 높아 경제적이며 휘도비도 대체로 좋다. 그러므로 터널에서는 조명기구의 위치를 일반적으로 벽면보다 천장에 설치하는 것이 바람직하겠다.

농촌 청소년 공부방의 조명환경 실태조사 (Actual Conditions on the Illumination Environment of the Study Rooms in the Youth of an Agriculture Village)

  • 김현지;전경선;이인효;안옥희
    • 조명전기설비학회논문지
    • /
    • 제23권4호
    • /
    • pp.1-7
    • /
    • 2009
  • 본 연구에서는 농촌 청소년 공부방을 대상으로 조명환경 실태조사를 실시하였다. 그 결과, 공부방의 평균 공간의 크기는 11.42[$m^2$]이며, 주로 광원은 형광등을 사용하였으며 조명사용방법은 전반조명만 이용하는 경우가 73.8[%]이며, 배광방식은 직접조명 방식을 주로 사용하고 있었다. 또한 스탠드를 소유하고 있는 가구는 45.7[%]이었으며, 국부조명인 스탠드를 사용하는 비율은 전체 조사대상의 20[%]에 지나지 않아 시작업이 효과적이지 못하였다. 내부공간 조도는 평균 131.82[lx]이며, 책상면 조도는 253.64[lx]로 최저허용조도의 42.3[%]에 해당하는 열악한 실정이었으며, 균제도는 평균 35.61[%]로 나타났다. 또한 사용자의 조명환경에 비해 만족도는 3.93점으로 높아 조명에 대한 인식이 매우 부족한 것으로 사료된다.

학교 건축물의 야간 조도분포 분석 (Analysis of a Night Illuminance Distribution in School Buildings)

  • 박동화;성낙진;신재화;이병기
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제10권6호
    • /
    • pp.48-53
    • /
    • 1996
  • 본 연구는 인천시에 소재한 초·중·고등학교의 야간 조명환경(교실, 과학실, 실험실)을 조사하기 위하여 개교된지 10년이내, 20년, 30년 경과 등으로 나누어 각 4개 학교 이상을 추출하여 조도를 측정, 분석하였다. 교실 평균조도는 235.5[lx](고등학교 ; 260[lx], 중학교; 208[lx], 초등학교 ; 203[lx]), 과학실과 실험실의 경우에는 233.7[lx](고등학교 ; 248.8[lx], 중학교; 216.4[lx], 초등학교 ; 207.8[lx])로서 양적인 면에서는 매우 향상되었으나, 균제도(평균값이 교실은 0.95, 과학실이나 실험실은 1.08)에 있어서는 권장값을 매우 초과하고 있으며, 조도구배에서도 최대조도와 최소조도의 비(교실;7.9, 과학실이나 실험실;6.8)가 크게 나타나며, 건축된지 오래된 학교일수록 크게 나타나 조도의 질적인 개선을 위한 많은 노력이 필요한 것으로 나타났다.

  • PDF

법정근로시간 단축의 경제적 효과 (The economic effects of working hours reduction in Korea)

  • 신관호;신동균;유경준
    • 노동경제논집
    • /
    • 제25권3호
    • /
    • pp.1-34
    • /
    • 2002
  • 본 연구는 법정근로시간 단축이 성장률, 투자, 소비, 고용 등 제 경제변수들에 주는 영향을 분석한다. 본 연구는 기본 분석모형으로서 Hansen(1985)과 Rogerson(1988)에 의해 개발된 비가분성(indivisible) 노동 모형을 사용하나 노동생산성 면에서의 근로자들의 이질성을 명시적으로 고려함으로써 그들의 모형을 확장하였다. 경제활동인구 조사와 도시가계 조사 데이터로 연결 패널자료를 구성하여 기존 근로자와 근로시간 단축에 의해 새로 고용되는 근로자 두 집단 사이에 존재하는 효율파라미터 값을 추정하였다. 시뮬레이션을 통하여 장기적인 균제 상태를 비교 분석해 본 결과 법정근로시간이 44시간에서 40시간으로 단축될 경우, 추가로 고용되는 근로자는 기존 근로자 생산성의 약 95%이며 고용은 약 4.9% 증가하는 것으로 나타난다. 그러나 새로운 균제 상태에서는 이는 법정근로시간의 단축에 따른 경제 전체 근로자의 실(actual) 평균근로시간의 감소와 신규 근로자의 유입에 의한 평균노동생산성 감소로 유효노동량이 2.03% 감소하기 때문이다.

  • PDF

Candida pelliculosa에 의한 진균성 슬관절염의 관절경적 치료 - 증례 보고 - (Arthroscopic Treatment of Fungous Arthritis of Knee Joint by Candida pelliculosa - A Case Report -)

  • 김형천;안수한;김광열;황연수;이지훈;이동은
    • 대한관절경학회지
    • /
    • 제17권1호
    • /
    • pp.79-83
    • /
    • 2013
  • 슬관절에서의 칸디다 감염증은 매우 드물다. 칸디다 감염증은 임상 증상이 뚜렷하지 않아 진단이 어렵다. 슬관절에서 발생하는 칸디다 감염 중 Candida albicans가 가장 흔한 균주이고 Candida pelliculosa는 거의 보고된 적이 없는 균주이다. 이에 저자들은 스테로이드 주사 후 슬관절의 Candida pelliculosa 감염증이 발생한 1예를 반복적 관절경하 변연 절제술 및 세척술 그리고 관절경하 항진균제 혼합 시멘트정 충전물 삽입술을 이용하여 성공적으로 치료하였기에 보고하는 바이다.

  • PDF

베네치안 블라인드 슬랫각도 형태변화에 따른 주광성능에 관한 연구 - Radiance Program 중심으로 (An Evaluating of Daylighting Performance by Venetian Blind Shapes Type Change - Centre on Radiance Program)

  • 임태섭;박종명;임정희;김병선
    • KIEAE Journal
    • /
    • 제13권5호
    • /
    • pp.59-66
    • /
    • 2013
  • Current Architectural Facade Designs have been trending to increased glass areas resulting in increasing impact on interior lighting and daylighting. In regards to indoor environmental quality, the increase in window space has a large impact on the daylighting received which ultimately impacts the liveability of a space. Especially when considering seasons, in the summer, excessive daylighting can result in glare as well as put an increased load in conditioning the air space further reducing energy efficiency. As a result, in order to improve the sustainability performance of a building, it is important to limit the natural lighting exposure to properly meet the needs and conditions of the building occupants. One of the most representative features to limit excessive sunlight exposure, is to incorporate operable blind systems. To this end, this research has been based on simulations performance through the Radiance Program. Radiance is capable of analyzing performance of daylight and impact of sunlight. Through analysis of different slat angles and blind shapes, impact and minimization of energy usage was evaluated. Furthermore, seasonal analysis was performed in order to understand the effects of seasonal climate factors. Ultimately this research provides an analysis of operable blinds optimization and effects of blind shape, control factors and angle of shading.