• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.822-826
• /
• 2007

This study was conducted to determine the effects of a 0.5% sodium alginate eggshell coating, that was applied at two temperatures, 5 and $25^{\circ}C$, by examining the degree of microbial inhibition on the eggshell surface as well as the coating's effects on egg quality during storage. A significant portion of human Salmonella enteritidis infection is traced to food contamination, and eggs are often highly exposed to this type of contamination. The 0.5% sodium alginate coating's effect for inhibiting microbial growth on the eggs, at $25^{\circ}C$ for 7 days, was one hundred thousand times more effective than that of the uncoated eggs. The pH level in eggs increases as the eggs lose $CO_2$ and as the storage temperature increases. We found that the pH of the coated eggs was lower than that of the uncoated eggs. The pH for the uncoated eggs changed from 7.72 to 7.94 over 30 days of storage at $5^{\circ}C$. However, when the eggs were coated with 0.5% sodium alginate, the pH changed from 7.72 to 7.85 over 30 days of storage at $5^{\circ}C$. The Haugh unit was 66.02 for the uncoated eggs and 70.37 for the 0.5% sodium alginate coated eggs after 30 days of storage. The yolk index of the eggs coated with sodium alginate was higher than that of the uncoated eggs after 30 days. These results indicate that a sodium alginate coating on eggs can serve as protection from microbes and is effective in preserving the interior quality of eggs.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.444-450
• /
• 2022

The effect of coated polyester (PET) textiles with metal oxide, chitosan, and copper ion on the antibacterial and antiviral activities was evaluated to investigate the applicability of multi-coated PET textiles as antiviral materials. Compared to coated PETs with a single agent, multi-coated PETs reduced the loading amount of coating materials as well as the contact time with bacteria for a bacterial cell number of < 10 CFU/mL, which was not detectable with the naked eyes. Metal oxides generate reactive oxygen species (ROS) such as free radicals by a catalytic reaction, and copper ions can promote contact killing by the generation of ROS. Chitosan not only enhanced antibacterial activities due to amine groups, but enabled it to be a template to load copper ions. We observed that multi-coated PET textiles have both antibacterial activities for E. coli and S. aureus and antiviral efficiency of more than 99.9% for influenza A (H1N1) and SARS-CoV-2. The multi-coated PET textiles could also be prepared via a roll-to-roll coating process, which showed high antiviral efficacy, demonstrating its potential use in air filtration and antiviral products such as masks and personal protective equipment.

• Korean Journal of Materials Research
• /
• v.6 no.10
• /
• pp.1034-1042
• /
• 1996

본 연구에서는 인산코팅된 것과 되지 않은 OXI-PAN섬유를 사용하여 제조된 무질서 배향의 OXI-PAN/페놀수지 복합재료를 불활성분위기의 여러 열처리온도에서 탄화하였을 때, 섬유표면에 인화합물의 존재 유.무가 복합재료의 물리적특성 및 미세구조 변화에 미치는 영향을 조사하였다. 두 종류 복합재료의 물리적특성 변화를 탄화온도 영향에 대한 섬유와 매트릭스 및 그 계면에서의 미세구조 거동변화와 기공형성의 관점에서 해석하였다. 열처리시 온도상승에 따라 섬유와 매트릭스 계면에서의 화학반응에 의해서 그 구분이 점차 사라지면서 국부적으로 치밀하고 균일한 상을 이루고 있는 것으로 조사되었다. 또한, 탄화 조건에서도 인산코팅은 OXI-PAN 섬유의 직경의 감소를 억제하고 열안정성을 향상시키므로 복합재료의 부피수축률을 줄이고 탄화수율을 증가시키는데도 어느정도 기여할 수 있으리라 판단되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.49-49
• /
• 2002

독립된 티타늄(Ti)과 실리콘(Si) 타켓을 사용하여 DC reactive magnetron co-sputtering 공 정으로 Ti-Si-N 코탱막을 SKD 11 합금강위에 합성하였다. 고분해능 TEM 및 XPS 분석들로부터 Ti-Si-N 코탱막은 나노미터 크기의 TiN결정체들이 비정질 Si3N4 기지에 분산된 나노복합체의 마세구조를 냐타내었다. 코탱막의 경도는 11 at.%의 Si 함량에서 39 GPa의 최 고 경도값을 나타내었고 이 경우 미셰조직은 5nm 크기의 미세한 TiN 결정이 비정절상의 기지에 균일하게 분포된 특성을 보였다 .. Ti-Si-N 박막내에 Si 함량이 증가할수록 TiN 결정 상들은 다배향성을 나타내었고 크기가 감소하였으며 비정질상에 의해 완전히 둘려싸언 형상 으로 변화하였다. 높은 Si 함량에서는 질소 소스의 부족현상에 의하여 코팅막내에서 free Si 가 나타났다. 상대습도가 증가함에 따라 Ti-Si-N 코탱막의 마찰계수와 마모량이 현저하게 감소하였다. 강재에 대한 Ti-Si-N 코팅막의 마모거동에 있어서 Si02 냐 Si(OH)2 같은 얇은 윤활막의 형성이 중요한 역할을 하는 것으로 판단되어졌다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.59-59
• /
• 1996

막분리에 의한 폐윤활유 재생공정을 개발하기 위한 기초 연구로써 폐윤활유 분리/재생용으로 적합한 복층(multilayer)세라믹 복합막의 제조와 합성막의 폐유 분리 효율등이 연구되었다. 결함이 없고 두께가 균일한 지르코니아 복합막 (기공크기 0.07 $\mu$m 이하)은 압출 성형법으로 제조한 튜브형 $\alpha$-알루미나 담체 (외경 7.8 mm, 두께 0.6 mm, 기공크기 0.7 $\mu$m)내부표면에 역침지 인상법(reverse dip-drawing technique)에 의하여 지르코니아 슬러리를 코팅 한 후 950$\circ$C에서 1시간 열처리하여 제조 되었다. 또한 지르코니아 복합막 위에 니타니아 졸-겔 코팅을 한 후 450$\circ$C에서 2시간 열처리하여 기공크기가 15 nm정도인 3층 복합막을 제조 하였다. SEM, Bubble Point Test, Mercury Porosimeter 그리고 분획 분자량 측정등에 의하여 복합막의 코팅층 두께, 결함유무 및 막의 기공크기등을 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.177.2-177.2
• /
• 2014

현재 플렉시블 전자기기에 대한 수요가 증가함에 따라 Ag nanowire는 ITO 대체용 투명전극 물질로 주목받고 있다. Ag nanowrie 투명전극은 면저항이 약 $300{\Omega}/sq$ 정도인 PEDOT 투명전극 보다 성능이 우수하지만, 표면에 나노와이어의 적층으로 100 nm 크기의 돌기들이 존재하여 균일한 표면특성이 요구되는 투명전극에 불리한 요인이 된다. Ag nanowire를 투명전극으로 사용하여 OLED를 제조할 경우, 40 nm~100 nm의 두께를 갖는 HTL층보다 투명전극 표면의 Rpv 값이 큰 경우 Leakage current가 증가하므로 이러한 돌기들을 감소시키는 것이 Ag nanowire를 투명전극에 적용할 수 있는 중요한 요건이 된다. 본 연구에서는 PET film 위에 Ag nanowire를 얇게 코팅하여 투과도 약 87%, 면저항 $20{\Omega}/sq$ 이하의 특성을 갖는 투명전극을 제조하였다. 그리고 Ag nanowire를 코팅한 투명전극의 표면 Roughness를 감소시키기 위해 Roll press를 이용하여 나노와이어를 물리적으로 압착하였고, 압착된 Ag nanowire 투명전극 위에 PEDOT를 코팅하여 전도도 및 표면 Roughness를 감소시키는 연구를 진행하였다.

• Culinary science and hospitality research
• /
• v.21 no.6
• /
• pp.303-311
• /
• 2015

This study was carried out to evaluate the possibility of polyols for coating material of chewing gum. Five polyols xylitol, maltitol, isomalt, erythritol, and sorbitol were compared the coating quality, coating and drying time, and color differences. Maltitol was evaluated to be the best quality for coating the gum, whereas erythritol and sorbitol were not considered for coating materials for gum. These results derived from irregular surface layer and low productivity due to increased coating time. According to changes in color of chewing gum, samples coated maltitol and xylitol and isomalt stored at high temperature. In addition, color difference of sample coated maltitol was calculated 2.88 stored at $80^{\circ}C$ for 1 day, but those of xylitol and maltitol were highly evaluated. Sample coated maltitol in polypropylene bag was stored and measured for 1 month. Changes in color of sample was slightly occurred at below $40^{\circ}C$ and the color difference was not more than 3 at $60^{\circ}C$. Chewing gum coated maltitol as coating material was expected more stable in the quality of color during distribution. Current study was performed to color changes during storage, further study will be proceeded about shelf-life of chewing gum coated polyols.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.471-476
• /
• 2015

Purpose: We have analyzed the transmittance distribution of various ocular lenses using local transmittance microscope to investigate the optical homogeneity of the lens. Methods: The local transmittance of the laser which is focused on the surface of the spectacle lens was measured by using the photo-detector, lock-in amplifier and motorized-stage. 25 multi-coated lenses with non-tinted of 5 groups and 45 multicoated lenses with tinted of 9 groups were analyzed as a sample respectively. Results: Average and deviation of local transmittance for nontinted lenses were measured almost uniformly with various refractive index and coating. However, deviation of transmittance of for tinted lenses was analyzed as about 3.7 times larger than that of non-tinted lenses. Inhomogeneity of local transmittance of for tinted lenses was also analyzed as about 3.1 times larger than that of non-tinted lenses. Conclusions: We could analyze that standard deviation of transmittance and inhomogeneity of local transmittance of for tinted lenses is larger than that of non-tinted lenses using the local transmittance microscope. These analysis using local transmittance microscope can be utilized as a way to evaluate lens performance and improve optical homogeneity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.319.2-319.2
• /
• 2016

ZrN 코팅은 TiN과 특성이 유사한 옅은 금색의 질화 박막이나 내식성이 우수하여 의료용, 자동차 부품, 항공부품, 장식용으로 적용되고 있다. 스테인레스계 의료용 기구나 생활기구의 항균성 기능이 부여된 표면처리는 아직 널리 보급되고 있지 않아 장식성과 내부식성이 뛰어난ZrN 박막에 구리를 함유시킴으로서 항균성의 변화를 관찰하고자 하였다. 진공 아크 이온플레이팅 방법으로서 ZrN을 성장시키면서 스퍼터링법에 의하여 Cu를 함유시키는 방법으로 실험을 실시하였다. 기재는 SUS 304를 사용하였고, 공정온도 $400^{\circ}C$에서 질소분압 1-5 Pa, 아크전류 90 A의 조건에서 Cu 스퍼터링 타겟의 전류를 1-7A 까지 변화하여 구리함유 ZrN 박막을 합성하였다. 구리 함류량에 따른 XRD를 통한 결정구조분석과 SEM/EDX를 통한 성분변화분석을 실시하였다. 구리함유 박막에 대해서 시간에 따른 대장균을 성장을 분석하여 기재인 SUS304, ZrN, 구리 함유 ZrN에 대한 대장균 항균성을 조사하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.33-38
• /
• 2006

Aerosol slurry composed of dielectric materials, distilled water, and deflocculants was sprayed on the substrates, through a high-pressure spray gun as an aerosol. The coated layers were cofired together with $Al_{2}O_{3}$ substrates and green sheets on which the inner connectors were printed. Although the coating rate of coated layers strongly depended on slurry viscosity, spray shape, and the pressure of the spray gun, the coated density was not changed. Buried conductors were maintained as printed by high pressure spray coating method, because the pressing process was not used. At the optimum condition of air controller step 3-4 and slurry viscosity c.p 2000-4000, dense and uniform layers could be achieved. Comparing with conventional lamination process using green sheets, spray coating method enabled thin dielectric layers of $20{\sim}50{\mu}m$.