• 제목/요약/키워드: 균일 열유속

검색결과 48건 처리시간 0.032초

고진공하 열유속흡수법을 이용한 위성체 열진공시험

  • 이상훈;진성호;조혁진;서희준;문귀원
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.116-116
    • /
    • 2012
  • 위성의 발사, 천이궤도, 운영궤도 등에서 위성체에 주어지는 극한 온도와 진공상태에서 위성체와 열제어시스템이 요구 조건을 만족시키는가를 확인하기 위하여 열진공시험을 수행한다. 우주에서 일어나는 환경변화는 극도로 심해서 지상에서 이와 유사한 열적 환경을 모사하는 방법은 쉽지가 않고, 일반적으로 위성체에 대한 열진공/평형 시험을 위해서는 열유속 흡수법과 열유속 투사법의 두 가지 방법을 사용한다. 한국항공우주연구원에서는 종래 접촉식 히터를 위성체에 직접 부착하는 방법에서 탈피하여 새로이 IR Lamp를 이용한 열유속 흡수법을 이용하여 위성체에 계산된 열유속을 인가하는 방법으로 위성체 열진공/평형시험을 수행하였으며, IR Lamp는 요구되는 100W~400W 사이의 열량을 오차 범위 5% 이내로 인가하여 균일한 온도 분포를 유지하고 성공적인 시험을 수행하였다.

  • PDF

저온의 순수물속에 잠겨있는 약간 경사진 균일 열유속 원기등에 의한 자연대류의 실험적 연구 (Experimental Study of Natural Convection from a Slightly Inclined Cylinder with Uniform Heat Flux Immersed in Cold Pure Water)

  • 유갑종;추홍록;장우석
    • 대한기계학회논문집
    • /
    • 제18권7호
    • /
    • pp.1799-1807
    • /
    • 1994
  • Natural convection from a slightly inclined circular cylinders immersed in quiescent cold pure water was studied experimentally. The experiment was carried out for circular cylinders with uniform heat flux ranging from $100W/m^{2} to 800 W/m^{2}$ and inclined angle ranging from horizontal $({\phi}=0^{\circ}) to 15^{\circ}$. The flow fields around cylinder were visualized and heat transfer characteristics investigated by measuring the surface temperatures for each case. As the results, it is shown that flow patterns are changed consecutively through the sequence of steady state downflow, unsteady state flow and steady state upflow with increasing heat flux. At the same inclined angle, as heat flux increases, the average Nusselt number decreases and then increases. At the same heat flux, as inclined angle increases, the average Nusselt number decreases.

상부채널을 갖는 사각공간에서 열유속 변화에 따른 공기대류의 속도와 온도 가시화 (Velocity and temperature Visualization of Air Convection in Differently Heated Rectangular Cavity with Upper channel)

  • 이철재;정한식;박찬수;조대환
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.290-295
    • /
    • 2000
  • An experimental study was carried out in a cavity with upper channel and square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. The visualization system consists of 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system(CACTUS'2000). Obtained result showed various flow patterns. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach-Zehnder are also compared in terms of constant heat flux.

  • PDF

얇은 수직 사각유로에서의 포화비등조건 임계열유속 예측 (Prediction of Critical Heat Flux for Saturated Flow Boiling Water in Vertical Narrow Rectangular Channels)

  • 최길식;장순흥;정용훈
    • 대한기계학회논문집B
    • /
    • 제39권12호
    • /
    • pp.953-963
    • /
    • 2015
  • 산업적으로 얇은 사각유로에서의 임계열유속을 포함한 열수력 현상을 이해하고 이를 시스템 설계에 반영해야 될 필요성이 증대되고 있다. 포화비등조건에서 임계열유속이 발생하는 주요기구는 일반적으로 환상유동 영역에서 액막이 건조되는 것이다. 이러한 임계열유속을 예측하기 위하여 원형관에 대한 대표적인 액막건조모델을 고찰하고 환상유동 시작 경계조건을 상수로 가정하는 기존 모델의 한계를 살펴보았다. 균일한 열유속으로 가열되는 얇은 수직사각유로 상향유동에서의 임계열유속을 예측하기 위하여 환상유동을 단순 모델링하고, 새로운 액막건조모델을 적용하였다. 284 개 실험데이타에 대한 예측성능을 확인한 결과 MAE 18.1%, RMSE 22.9% 예측오차로 실험데이타를 잘 예측할 수 있음을 확인하였다.

성층 데브리층에서의 강제대류 드라이아웃 열유속 (Forced Flow Dryout Heat Flux in a Stratified Debris Bed)

  • Cha, Jong-Hee;Chung, Moon-Ki;Jin, Yong-Suk
    • Nuclear Engineering and Technology
    • /
    • 제20권2호
    • /
    • pp.112-119
    • /
    • 1988
  • 이 연구의 목적은 가혹한 사고후 손상된 원자로심을 모의한 열이 발생하는 성충 데브리층에서의 강제대류 드라이아웃 열유속 자료를 실험 적으로 얻고자 한 것이다. 여 기서는 일정한 층의 깊이와 냉각재 유입온도 조건하에서 선정된 몇 가지 크기의 입자로 성층을 형성한 데브리층에서 주로 냉각재질량유속이 드라이아웃 열유속에 미치는 영향을 관찰하였다. 이 실험적 연구로부터 얻은 주요 결과는 다음과 같다 (1) 성층 데브리층에서의 드라이아웃 열유속은 질량유속의 증가와 더불어 증가하며 그 증가의 경향은 크기가 균일한 입자층에 대한 것과 유사하다. (2) 이론치와 실험치와의 비교에서 입자직경으로는 표면적 평균 직경을 사용하는 것이 적합하다.

  • PDF

광범위한 압력조건하에서 균일 가열 수직 봉다발에서의 임계열유속 (Critical Heat Flux in Uniformly Heated Rod Bundle Under Wide Range of System Pressures)

  • 문상기;천세영;최기용
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.195-200
    • /
    • 2001
  • An experimental study on critical heat flux (CHF) has been performed for water flow in a uniformly heated vertical 3 by 3 rod bundle under low flow and a wide range of pressure conditions. The objective of this study is to investigate the parametric trends of CHF with 3 by 3 rod bundle test section where three unheated rods exist. The general trends of the CHF are coincident with previous understandings. At low flow and system pressure above 3 MPa, some critical qualities are larger than 1.0 due to counter-current flow in test sections. Since there is a supply of water to the heated section from unheated section, the maximum CHFs at system pressure between 2 and 4 MPa are not shown.

  • PDF

균일 가열 수직 환상관에서 임계열유속조건 직전의 열전달계수에 관한 실험적 연구 (An Experimental Study on Heat Transfer Coefficients just before Critical Heat Flux Conditions in Uniformly Heated Vertical Annulus)

  • 천세영;임창하;문상기;정문기;최영돈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.330-336
    • /
    • 2001
  • Water heat transfer experiments were carried out in a uniformly heated annulus with a wide range of pressure conditions. The local heat transfer coefficients for saturated water flow boiling have been measured just before the occurrence of the critical heat flux (CHF) along the length of the heated section. The trends of the measured heat transfer coefficients were quite different from the conventional understanding for the heat transfer of saturated flow boiling. This discrepancy was explained from the nucleate boiling in the liquid film of annular flow under high heat flux conditions.

  • PDF