• Journal of Korea Water Resources Association
• /
• v.37 no.5
• /
• pp.387-395
• /
• 2004

A computer model was proposed to simulate channel changes and bed material sorting of the meandering channels with different grain size in time and space simultaneously. The bed at the outside of the meandering channel with mixed sediments was scoured deeply and composed of coarser materials, and at the inside was aggradated and composed of finer materials. The sorting process started at the upstream inflection point and was finished at the downstream inflection point. At the natural with complicated boundaries and non-uniform grain sizes, the bed near the outside at the bend and narrow width was scoured deeper with coarse materials than in the channel with uniform grain sizes. The point bars showed lip at the inside near the bend and the bed materials were finer The bed at the outside near the bend and in the narrow width was scoured deeply with the coarser materials.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1662-1663
• /
• 2011

본 논문에서 하지 정맥 지료를 위한 마이크로파 시스템에서 사용될 가열 안테나의 전계 분포를 균일하게 형성시키기 위해 철사 도파관 안테나를 설계 및 제작하였다. 일반적인 도파관 안테나에 경우 안테나 중심 부분에 전계가 가장 세게 분포되어 온도가 다른 곳에 비해 차이가 많이 나므로 인체 피부가 회상을 입힐 위험이 있다. 제안된 철사 도파관 안테나는 끝단에 가느다란 철을 이용하여 전기장을 철사 부분에 집중시켜 안테나 중앙 부분에 집중된 전기장을 분산되도록 설계하였다. 따라서 전기장을 소스로 하는 온도도 균일하게 분포하게 된다. 제안된 철사 도파관 안테나 내부의 전계 분포는 Ansoft 사의 HFSS, 온도 분포는 CST 사의 MWS(Microwave Studio)를 이용하여 시뮬레이션을 하였고, 일반적인 안테나 경우보다 더 균일한 전계와 온도 분포 특성을 보임을 확인하였다. 제작된 철사 안테나는 사용주파수 15GHz에서 -10dB 이하의 반사 손실을 보였다. 또한 안테나 타당성을 검증하기 위해 개구면 앞에 돼지 껍데기를 두고 일정시간 가열하여 일반 안테나와 제안된 철사 도파관 안테나 온도 분포를 비교하였다. 열화상 카메라를 이용한 실험결과 일반 안테나에 경우 중앙과 가장 자리부분 사이에 약 $29^{\circ}C$, 제안된 철사 도파관 안테나에 경우에는 약 $12.5^{\circ}C$의 차이를 보였다. 이를 통해 제안된 철사 도파관 안테나가 전계 분포 균일성 향상에 기여함을 확인하였다.

• Air Cleaning Technology
• /
• v.2 no.4 s.8
• /
• pp.46-69
• /
• 1990

• Air Cleaning Technology
• /
• v.5 no.2 s.17
• /
• pp.60-64
• /
• 1992

• The monthly packaging world
• /
• s.67
• /
• pp.108-109
• /
• 1998

• KOREAN POULTRY JOURNAL
• /
• v.19 no.4 s.210
• /
• pp.50-54
• /
• 1987

산란계 사육에 있어 최대의 관심사는 뭐니뭐니 해도 산란율로 귀착된다. 육성계의 사양관리나 점등관리, 질병관리 등의 모든 것이 결국은 산란을 시키기 위한 준비이며, 훌륭한 산란계로 육성시키지 못하면 그동안의 숱한 노력이나 막대한 경비를 회수할 수 없게 된다. 따라서 무엇보다도 육성기의 사양관리가 채란업의 성패를 좌우하게 된다. 육성기의 사양관리에는 여러가지 고려되어야 할 중요한 점이 있지만, 그중에서도 체중과 정강이 길이 및 균일성은 그 계군의 능력발휘에 있어 가장 중요한 요소이므로 중점적으로 논의해 보도록 한다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.575-580
• /
• 2023

This study was prevent the decrease in crop output by insect pests and spraying by application uniformity. A flight level 4 m height and 4-5 m/sec. speed are difficult to maintain with a agricultural drone for aerial application, which has been affected by the methods or environmental factors, such as changes in the wind. Therefore, which can allow a controlled application width and spray rate automatically and verified experimentally using drone. The sprayed particles began to decrease from about 3.75 m on the left and right sides of the spray nozzle. According to the number of particles, the effective spraying width was observed to be about 7.5 m, and it was verified that the proposed spraying system was effective in uniform control system.

• Journal of Korea Foundry Society
• /
• v.43 no.4
• /
• pp.194-200
• /
• 2023

The heat transfer of the mold in the casting process has been calculated by considering the mold as a uniform isotropic material. Since the mold was not a uniform isotropic material, however, the calculation was performed with approximate values, and in particular, estimated values were used when considering compaction and the amount of added binder. In this study, a calculation algorithm of the thermal properties of the sand mold was developed. An algorithm for calculating the thermal conductivity and specific heat based on a thermal resistance model in the case of mono-dispersed sand grains was also developed and applied to sand molds with various size distributions. The thermal properties of sand were calculated for artificial sand, and relatively close values compared to the experimental values were obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.810-819
• /
• 2001

칼라가 물체 인식에 아주 효율적인 단서를 제공하지만 칼라 분포는 시청 조건과 카메라의 위치에 아주 큰 영향을 받는다. 생김새와 모양의 변화에 의한 칼라 분포 변화 문제를 해결하기 위해 본 논문에서는 밝기 값의 변화에 영향을 받지 않고, 색상(hue) 성분에 민감한 칼라 벡터각(color vector angle)을 이용하여 칼라 에지를 추출한 후, 영상의 화소들을 평탄 화소와 에지 화소로 구분하여 칼라 특징 값을 추출하였다. 에지 화소의 경우에는 에지 주위 칼라 쌍의 전체 분포를 HLS 색좌표계의 비균일 양자화를 통해 칼라 인접 히스토그램(color adjacency histogram)으로 표현하고, 평탄 화소의 경우에는 HLS 색좌표계의 비균일 양자화와 칼라 벡터각 균일 양자화를 통해 칼라 벡터각 히스토그램(color vector angle histogram)을 구성하여 공간적인 칼라분포를 표현하였다. 제안한 칼라 히스토그램을 이용하여 영상 검색에 적용하여 성능을 실험한 결과, 작은 빈의 수를 가지는 제안한 방법이 기존의 방법들보다 훨씬 효율적이고, 생김새와 모양의 변화에 아주 강건한 영상 검색이 가능하였고, 기존의 칼라 히스토그램 역투사 방법보다 훨씬 정확한 물체 위치 추정이 가능함을 확인할 수 있었다.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.383-392
• /
• 2021

It has been known that oyster mushrooms cultivated in facilities with thermal insulation have been strongly affected by inner environments. Forced air-circulation fans exert much direct influence on disturbing air inside the facility so the matter is of particular interest. This study is carried out to investigate the measured levels of air uniformity in a cultivation facility for oyster mushroom in the various cases that reversibly controlled air-circulation fans which drove the flow in the upward and reverse direction by turn and unidirectional fans by which the wind blew upwards only were operated from July 1 to 10. The actual survey for the selection of ongoing operation cases presented that farmers, even though there were some discrepancies, have made use of fans in a way that it paused for 5-30min after running for 5-15min by turn. The level of air uniformity in the case of adopting reversible fans revealed a slight difference of 1.4-1.8℃ (Temp.) and 7.8-8.7% (R.H.) under the condition of not using a cooler during the investigation period. By contrast, unidirectional fans showed a noticeable difference of 3.2-3.7℃ and 14.0-15.4%, which meant that air uniformity driven by reversible fans much more increased compared to that for unidirectional fans. Among the twenty operational applications considered for reversible fans, the circumstance that the wind blew upwards for 10-15min and ceased for 5-10min and blew again in the reverse direction for 10-15min in succession gave minor improvements at the level of air uniformity, but at present there was somewhat difficult to make decision on which cases were optimally best. It seems necessary that the effects of reversible fans on air uniformity as well as qualities of oyster mushrooms have to be appraised in the cultivation period and the flow visualization needs to be done to ascertain the performance of air mixture.