• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.295-301
• /
• 1996

This study was carried out to clarify the effect of sprout length, burried depth of seed and CaO$_2$ seed coating on emergence, seedling stand and early growth of rice in puddled-soil drill seeding at Junbuk in 1995. The cultivar tested was Dongjinbyeo(Japonica type). Although the longer sprouted seeds were caused the better seedling stand, 4mm sprout length of seeds appeared to be appropriate for good seedling stand and seeding uniformity, while 6mm sprouted seed resulted in ununiform seedling establishment. Rapid emergence and increased seedling stand were obtained by CaO$_2$ seed coating, which had effect more on soaked seed than on sprouted seed, but the seedling stand of sprouted seeds significantly reduced at deeper than 1cm seeding depth and also emergence rate of sprouted seeds significantly reduced at deeper than 2cm seeding depth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1194-1203
• /
• 2000

A magnetic field exposure system that generates 60 Hz magnetic fields from 1 mG to 5 G was designed and constructed for small-sized animal study. In order to investigate as many animals as possible at one series of test, uniform magnetic fields are required at wide living area of the animals. In this article, a cubic shaped field exposure system with three animal living floors was designed, which offers about 50 seating capacity. For calculation of magnetic fields inside the cage, a three-dimensional calculation program was developed. Using this, optimum electric current ratio of inner coil to outer coil and position of each coil were determined. Meanwhile, inductance of the exposure system was calculated for the design of power supply. The field measurement results of the manufactured exposure system showed that the difference between maximum and minimum magnetic field at the testing floors was less than 3%, which strongly demonstrated the field exposure system was good for small sized animal study.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.59-62
• /
• 1998

One dimensional inhomogeneous aperture modulation effects on the MTF of optical system was investigated. The lens undertest was a doublet made in Korea. It was 10 mm effective diameter, 87.8 mm effective focal length. The ray-fans and spot diagrams were caluculated and presented on the picture for on-axis and off-axis (field of view, 1$^{\circ}$ and 2$^{\circ}$). Aperture modulation was carried out by positioning a aperture modulator close contacted with the lens undertest. We bought two modulators from Edmud Company in U.S.A. One was linear type and the other was stepped type. The MTFs were measured on the best of focus for unmodulated apertue where the MTF has the largest value for 60 c/mm and were compared with one another. The MTFs of modulated apertures had a little lower values than the MTF of unmodulated aperture for on-axis but in the case off-axis, the values are highly improved as much as the wider field of view by modulating on the aperture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.87-90
• /
• 1973

Optimum plot shape and size in a uniformity trial in the newly founded experimental farm of KAERI were determined for seed yield with the basic units consisted of 2.5m $\times$ 0.6m plot. Various plot sizes and shapes were made by combination of the basic units. Coefficients of variations for yield were 21% in local branch type variety Kumkang-Dairip and 20% in the introduced branchless type variety Clark. This result indicates that the field in the new experimental farm is appropriate for soybean yield trials when adequate number of replications are employed in the field experiment. In general, C. V. values were gradually decreased with increase of plot sizes. Although the data were not consistant, the errors for the long narrow plots tend to have somewhat smaller than for the square shape plots. A sharp decrease in C.V. value was found from the $4.5\textrm{m}^2$ plot in the variety Kumkang-Dairip and from the $6\textrm{m}^2$ plot in the variety Clark. These results imply that 5-$6\textrm{m}^2$ plot could be used for yield trials in early generations of hybrid progenies. 2.5-5m long plot with 3-4 replications will be practical for yield trials in the early hybrid generations. The C.V. values with 7.5m long plot was about 16% in both varieties and 15.3% in 10m plot. These results indicate that 7.5-10m plot with 3-4 replications could be employed in accurate yield test in the advanced generations.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2013

Satellite's infrared detector shall be calibrated under thermal vacuum environment using a reference black body before a launch. The full aperture black body (FABB) as an infrared calibration reference shall be composed of vacuum compatible materials and temperature controlled from $-40^{\circ}C$ to $+40^{\circ}C$ with emissivity higher than 0.95. The temperature homogeneity over the central 80 % area of the FABB front surface shall be better than 2 K. The FABB designed by thermal and flow analysis was $1m{\times}1m{\times}8mm$ copper plate on which black painted aluminum honeycomb core was attached. Copper tubes were welded on the opposite side of the honeycomb core to allow temperature regulated gaseous nitrogen to flow through them. By the FABB validation test, the temperature homogeneity was observed around 1 K using 20 PT100 sensors and modified COTS infrared camera. The emissivity value was 0.975 at $40^{\circ}C$ under atmospheric pressure.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1499-1500
• /
• 2008

최근에 LCD의 후면광원으로 LED를 채용하는 경우가 증가하고 있다. 이러한 LED를 Back Light으로 사용할 경우 일정한 휘도의 유지와 색좌표의 보정은 고급제품의 경우 채용이 증가하고 있다. 본 연구에서는 LCD Monitor용 LED BLU의 CMS(Color Management System)을 개발하기 위하여 1.5W R,G,G,,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발하였고 LED를 PWM으로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발 하였다. 또한 Color Sensor와 CMS IC를 사용하여 Color를 Control하고 휘도도 컨트롤하는 제어회로 부분도 개발을 하였다. CMS 기능의 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 CMS IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 L558 x W359 x H30 으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.577-583
• /
• 2007

The field uniformity inside the reverberation chamber has been improved using sets of quadratic residue diffuser (QRD). The electromagnetic field inside the reverberation chamber with the dimension of $100{\times}80{\times}80cm$ has been analyzed by the finite-difference time-domain(FDTD) method. The calculated fields in a $40{\times}30{\times}30cm$ test volume have been sampled to obtain a standard deviation and field uniformity. Results show that the standard deviation of the calculated field and uniformity have been improved by varying angles and orientation of the inclined surfaces of the QRDs installed inside the reverberation chamber.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.146-146
• /
• 2001

목적： 해상도가 우수한 경직장 영상을 위한 소아용 two-turn 표면형 수신 코일, 안장 수신 코일을 제작하여 이를 이용하여 얻은 고양이의 경직장 영상을 비교한다. 대상 및 방법： 지금까지 소아의 경직장 영상은 주로 초음파를 이용하여 얻었으나 해상도가 떨어지며 아직까지 소아용 탐촉자는 개발되지 않았다. 소아의 항문직장 기형의 진단을 위해서는 해상도가 우수한 영상이 필요하고, 이를 위해 소아용 직장 RF 코일로 원주형 two-turn 표면형 코일, 안장 코일을 제작하였다. 크기는 직경 7mm, 길이 6cm와, 직경 10mm, 길이 l0cm 하였고, 코일의 구리선 바깥으로는 두께 1mm의 테프론 tube로 감쌌다. 균일한 시험 시료(phantom)로 마요네즈를 이용하여 T1 강조 영상(Spin echo TR/TE= 500/11 msec, FOV=12cm, 영상행렬 256$\times$256)을 얻어서 신호 강도의 profile을 얻는다. 이를 Mathematica를 이용하여 구한 RF 자기장 세기의 분포와 비교했다. 두 종류의 코일을 각각 사용하여 얻은 고양이 항문 괄약근 영상에서 외부 괄약근, 내부 괄약근 등을 구분, 비교하였다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.36-36
• /
• 2002

최근 한국기계연구원에서 개발된 Mechanochemical process (MCP)는 Spray conversion 법에 의하여 나노크기의 W/Cu 복합 분말을 제조하는 방법으로서, 현재 (주)나노테크에서 산업화를 위한 시험/개발이 진행 중이다. 이 방법에 의하여 W /1 0 ~ 40wt. %Cu 조성의 초미렵 W/Cu 복합 분말의 양산화가 가능하게 됨으로써, 나노복합분말을 사용한 초미립 W/Cu 합금의 소결 제조 연구 역시 나 노태크에서 분말사업화와 동시에 수행되고 있다. 현재 Spray conversion 법으로 제조되고 있는 W/Cu 나노복합분말 및 그 소결체는 Cu의 조성범 위에 따라 민수용 및 군수용 제품으로의 적용이 시도되고 있으며, 각기 특성향상을 목표로 각 적용 분야에서 요구되는 제반 성능에 대한 검토가 이루어지고 있다. 특히 군수용의 목적으로 사용될 경우, 정적 및 동적부하상태에서 재료의 균일한 변형이 가장 중요한 특성이다. 현 개발품의 경우, 일반 W 빛 Cu 원료에 비하여 상대적으로 높은 순도의 원료를 사용하였기 때문에 분말 및 소재상태 에서의 순도가 높아서, 연성을 저하시키는 것으로 알려진 기지상내 합금원소 또는 interface 게재물 이 존재할 가능성이 매우 낮다. 또한 초미립 W 입자들과 Cu 상의 혼합도가 극대화된 상태이기 때문에 상대적으로 저옹에서도 완전치밀화된 미세조직을 얻을 수 있는데, 이는 분말상태의 균일한 미세구조를 유지할 수 있으며, 동시에 W 업자간의 과도한 neck 형성을 방지함으로써 기계적 변형시 재료의 연성 향상이 기대된다. 이러한 W/Cu 나노복합분말 소결체의 특성은 균일한 밀도분포와 동시에 과도한 동적 부하상태에서 균일한 변형이 보장되어야만 하는 특정 군수용 목적에 잘 부합하는 것으로 판단된다. 본 고에서는 상기한 W/Cu 나노복함분말을 사용하여 균일한 미세구조를 가지는 완전치밀화된 소결재를 제조하는 과정과 제조된 소결재를 향후 군수용 제품에 척용시키기 위하여 진행된 단조특성에 대한 연구결과틀을 재료의 미세구조척 관점에서 논의하였다.

• Korean Journal of Poultry Science
• /
• v.46 no.4
• /
• pp.215-221
• /
• 2019

This study investigated the effects of various stocking densities on the growth performance of Korean native ducks. Twelve hundred day-old ducklings were reared for 50 days in a duck house (windowless, plastic wire-floor pen). Two weeks later, 852 of these ducks (350±30 g) were selected for at least 80% uniformity per stocking treatment (six treatments, four replications/treatment, depending on a stocking density of 4~9 birds m^-2). Experimental diets were corn-soybean-based and broiler ducks were grouped based on age [0~21 days of age (CP 21%, ME 2,900 kcal/kg) and 21~50 days of age (CP 17%, ME 3,100 kcal/kg)]. Body weight (BW) did not significantly differ among different aged treatment groups (P>0.05); however, uniformity decreased with higher stocking densities (P<0.05). Feed intake and feed conversion ratio of ducks aged 42~50 days significantly decreased in the T4-6 treatments compared with the T1-3 treatments (P<0.05). In all experimental periods, BW gain was not significantly different among treatments, but feed intake decreased significantly as the stocking density increased (P<0.05), and feed conversion ratio was significantly different among six treatments with stocking density (P<0.05). In conclusion, we found that the stocking density of Korean native ducks in a plastic wire-floor pen was approximately 7 birds m^-2 in consideration of productivity and uniformity.