• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.285-285
• /
• 2017

최근 전 세계적으로 심각해지는 물 부족 현상과 수질오염으로 대량의 원수를 빠른 시간 내에 여과하기 위한 여과장치의 개발 및 효율성 향상을 위한 연구의 필요성이 증가되고 있다. 특히 여과필터의 내부구조에 의해 유동이 편중되는 현상이 발생하면 여과효율 및 여과필터 유지관리에 문제가 발생되기 때문에 최적의 여과필터를 설계하는 것이 중요하다. 이에 본 연구에서는 수리모형실험으로 검토하기에 어려움이 있는 여과기 내부구조에 대한 유동특성을 수치해석을 이용하여 검토하였다. 수치해석은 유한요소법 기반의 수치모형으로 여과기 내부를 상세하게 모의할 수 없기 때문에 유한체적법 기반인 ANSYS CFX 모형을 이용하였다. 여과기 내 여과필터는 두께 2.0 mm, 공극율 25%로 가정하고 다공성 기법(porous media)을 적용하였다. 검토를 위한 경계조건은 유입부에 목표 취수량, 유출부에 대기압 조건을 적용하였으며, 여과기에 비해 매우 작게 구성된 여과필터 내부의 유동특성을 검토하기 위해 여과기는 최소 3.0 mm, 여과필터는 1.0 mm의 격자를 적용하였다. 현재 실제 여과시설에 적용되고 있는 여과기 제품 형상을 기준으로 여과기 내부 흐름공간의 크기 및 각도 조정에 따른 유동특성을 검토하여 여과효율을 비교하였으며 통과유량, 유속, 유속벡터 등을 검토하여 균등한 유량과 유속이 발생되는 최적의 여과장치 구조를 도출하였다. 본 연구에서 여과기 내부 구조 변경에 따른 유동특성 검토를 통해 도출된 최적의 여과기 내부크기 및 각도에 대한 설계인자는 여과기 내 여과필터의 효율을 증가시킬 뿐만 아니라 내구성 증진에 도움이 될 것으로 예상된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.74-74
• /
• 2017

자연하천에서 수자원의 원활하고 안전한 관리에 있어서 오염물의 혼합 거동에 대한 이해는 매우 중요하다. 대부분의 자연하천의 경우 만곡부 및 합류부와 같은 복잡한 지형을 갖고 있으며 이러한 경우 하천의 흐름이 복잡한 형태를 갖게 된다. 특히 수생태계에 많은 영향을 미치는 하폐수 처리장 처리수는 대부분 1차적으로 지류로 방류되어 이후 본류로 지속적으로 유입되게 된다. 이러한 오염물질이 지류로부터 본류로 혼합되는 합류부 구간의 경우 일반적인 1차원 혼합이 아닌 횡방향을 포함하는 2차원적인 혼합 거동에 대한 분석이 필요하다. 본 연구에서는 금호강과 진천천이 좌안으로부터 오염물질이 지속적으로 유입되는 낙동강 중류구간 합류부에서의 혼합 구간의 연구를 위하여 횡분산계수 산정을 위하여 전기전도도(electrical conductivity: EC)를 이용한 농도 추적 실험을 수행하였다. 낙동강 본류에서 정해진 측선을 따라 센서가 설치된 보트를 이용하여 실시간으로 농도, 수리량 데이터를 GPS 위치 데이터와 함께 취득하였다. 또한 실험으로부터 취득한 자료를 바탕으로 2차원 이송-확산 혼합 거동 모델인 CTM-2D 수치모형을 이용하여 모의하였다. 실험 수행 결과, 지류인 금호강과 진천천의 EC 농도가 합류 전 낙동강 본류의 EC 기저농도 보다 더 높은 값을 나타내었다. 지류의 유입으로 인하여 본류 좌안 쪽에서 전기전도도의 값의 상승을 확인할 수 있었으며 하류로 이동할수록 불균등했던 전기전도도의 분포가 횡방향 혼합을 통하여 점점 균등한 분포로 전환되는 것으로 나타났다. 또한 2차원 혼합 거동 분석에 필요한 횡 분산계수 산정을 위해 모멘트법, 해석해를 이용한 추적법, 수치모형을 통한 역산법을 통해 산정하여 결과를 비교하였다. 그 결과 모멘트법의 경우 다른 방법들에 비하여 전반적으로 과소 산정하는 경향을 나타내었다.

• Environmental and Resource Economics Review
• /
• v.30 no.4
• /
• pp.627-648
• /
• 2021

The fine-dust season management system refers to the policy of implementing enhanced reduction measures in transportation, power, business and living sectors in winter, when fine dust levels are high. The fine dust season management system is a regulatory policy that causes social costs and transfers to various economic players. Equity is an important issue for the cost burden. Therefore, in this study, the cost of each power generator was analyzed using the coal power generation reduction amount of each power generator to verify that the cost of the power sector is evenly distributed. In particular, the effect of the fine dust season management system on coal power generation of power generators was analyzed by applying a synthetic control method that can identify the time-variable effect of the policy. It was confirmed that the fine dust season management system reduced volume of fuel and power generation in coal power plants, resulting in an increase in the cost of the power generation sector, even considering the effect of some power demand due to the COVID-19 crisis. However, it could be seen that these costs were not distributed equally among the generators, and that they were more costly to the specific generators.Social costs incurred by fine dust season management need to be improved so that stakeholders are equally burdened.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.736-751
• /
• 2008

Although a growing number of studies have commonly used a simple areal weighting interpolation method to quantify demographic characteristics of impacted areas in environmental equity analysis, the results obtained are inevitably imprecise because of the method's unrealistic assumption that population is evenly distributed within a census enumeration unit. Two alternative areal interpolation methods such as intelligent areal weighting and regression methods can account for the distributional biases in the estimation of impacted populations by making use of additional information about the geographic distribution of population. This research explores five areal interpolation methods for estimating the population characteristics of impacted areas in environmental equity analysis and evaluates the sensitivity of the outcomes of environmental equity analysis to areal interpolation methods. This study used GIS techniques to allow areal interpolation to be informed by the distribution of land cover types, as inferred from a satellite image. in both the source and target units. Independent samples t-test statistics were measured to verify the environmental equity hypothesis while coefficients of variation were calculated to compare the relative variability and consistency in the socioeconomic characteristics of populations at risk over different areal interpolation methods. Results show that the outcomes of environmental equity analysis in the study area are not sensitive to the areal interpolation methods used in estimating affected populations, but the population estimates within the impacted areas are largely variable as different areal interpolation methods are used. This implies that the use of different areal interpolation methods may to some degree alter the statistical results of environmental equity analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.109-118
• /
• 2005

A concrete shear wall system is commonly adopted in high-rise residential apartment buildings. In the construction stage, a rectangular opening is often made for the convenience of horizontal movement of workers, and construction materials and equipment. In the case of safety or stability assessment of a shear wall, the cutout part can be a critical factor. Finite element method is adopted to investigate the elastic stability behavior of the perforated unit shear wall. The key analysis parameters are the cutout location and its size. The effect of out-of-plane bending and horizontal shear are also examined in the stability analysis.

• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.316-323
• /
• 2001

Gamut mapping is a technique that acts on cross-media color reproduction to transform a color between devices for the purpose of enhancing the appearance or preserving the appearance of an image. Gamut mapping essentially produces color conversion error which depends on the gamut mapping method, source and destination devices, and sample points for gamut modeling. For color space conversion between monitor colors and printer colors, empirical representation using sample measurements is currently widely utilized. Color samples are uniformly selected in the device space such as CMY or RGB, represented as color patches, and then measured. However, in the case of printer, these color samples are not evenly distributed inside the printer gamut and the color conversion error is increased. Accordingly, this paper introduces a equally distributed color sampling method in CIELAB space, a device- independent color space, to reduce color conversion error, and the performance is analyzed via color space conversion experiments using three-dimensional interpolation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.43-49
• /
• 2000

In this paper, we have modeled and fabricated $1{\times}5$ equal power splitter for 1.55${\mu}m$ wavelength using finite-difference beam propagation method and $Ag^+-Na^+$ ion-exchanged method in BK7 glass, respectively. The power splitting ratio could be controlled by changing the center waveguide gap and the inner Y-branch angle. As a result, the power splitting ratio shows 0.46dB when the waveguide width, the inner Y-branch angle and the center waveguide gap are 4.5${\mu}m$, 0.3 degree and 575${\mu}m$, respectively.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.398-402
• /
• 1995

Hardness and adhessiveness of cooked rice were measured with rice grain and rice block methods by texturemeter. In grain method 3, 4 and 5 grains were arranged and subjected to the texture test with a plastic plunger at 95% strain and 0.5mm/sec speed. The hardness were 7.4kg, 7.5kg and 10.0kg respectively and the coefficient of variation ranged from 37.0% to 25.9%, which was mainly due to the irregular geometry of the grains in each specimen set Adhesiveness could not be measured with this method. A cylindrical rice block($H/D=20mm{\times}15mm$) was made for the texture analysis. The hardness was 2.1 kg with coefficient of variation ranging from 2.8 to 7.0%, and the block method was s more reproducible compared to the grain method. A grooved plastic plunger and platform were designed for the measurement of adhesiveness of cooked rice block. The adhesiveness was 0.68kg sec and the coefficient of the variation was 4.6%.

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.52-59
• /
• 2012

The sprinkler system is regarded as the most effective fire extinguishing system. In this study, we proposed a sprinkler layout optimization framework based on fire simulation and mathematical programming. As a case study, the target space in the form of ordinary residence was set up with the size of $5.2m(L){\times}5.4m(W){\times}2.4m(H)$, and we constructed the fire scenario that polyurethane couch was ignited through carelessness. And we simulated and analyzed fire speed, temperature change and heat release rate according to the type and number of sprinklers installed. Through the formulation of installation and damage costs depending on sprinklers, the sprinkler layout showing optimal performance was resulted from mathematical programming.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.67-80
• /
• 2011

Choropleth mapping of population distribution is based on the assumption that people are uniformly distributed throughout each enumeration unit. Dasymetric mapping technique improves choropleth mapping by refining spatially aggregated data with residential information. Further, pycnophylactic interpolation can upgrade dasymetric mapping by considering population distribution of neighboring areas, while preserving the volumes of original units. This study proposed a combined solution of dasymetric mapping and pycnophylactic interpolation to improve the accuracy of population density distribution. Specifically, the dasymetric method accounts for the spatial distribution of population within each census unit, while pycnophylactic interpolation considers population distribution of neighboring area. This technique is demonstrated with 1990 census data of the Athens, GA. with land use land cover information derived from remotely-sensed imagery for the areal extent of populated areas. The results are evaluated by comparison between original population counts of smaller census units (census block groups) and population counts of the grid map built from larger units (census tracts) aggregated to the same areal units. The estimated populations indicate a satisfactory level of accuracy. Population distribution acquired by the suggested method can be re-aggregated to any type of geographic boundaries such as electoral boundaries, school districts, and even watershed for a variety of applications.