• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.677-687
• /
• 2006

Kriging interpolation is one of the generally used interpolation techniques in Geostatistics field. This technique includes the experimental and theoretical variograms and the formulation of kriging interpolation. In contrast to the conventional least square method for stress recovery, kriging interpolation is based on the weighted least square method to obtain the estimated exact solution from the stress data at the Gauss points. The weight factor is determined by variogram modeling for interpolation of stress data apart from the conventional interpolation methods that use an equal weight factor. In addition to this, the p-level is increased non-uniformly or selectively through a posteriori error estimation based on SPR (superconvergent patch recovery) technique, proposed by Zienkiewicz and Zhu, by auto mesh p-refinement. The cut-out plate problem under tension has been tested to validate this approach. It also provides validity of kriging interpolation through comparing to existing least square method.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.9
• /
• pp.513-518
• /
• 2017

In this paper, the removal efficiency of THMs (Trihalomethanes) and DOC (Disolved organic carbon) was compared under different GAC (Granual activated carbon) filling methods. One method is "full filling method" in which column is fully filled with GAC at once and the other is "periodic cumulative method" in which column is partially filled with GAC (10, 20, 33 and 50% of total column volume) and added each ratio during 300 days. The effluent concentration of both THMs and DOC under full filling method was low during the initial period, however, steadily increased with operating time. In the contrast, with periodic cumulative method, it maintained (relatively) evenly during the operating period. Periodic cumulative method was more efficient for removing THMs than full filling method. However, when the ratio of chlorodibromomethane or bromoform among THMs was significantly higher than chloroform and bromodichloromethane, full filling method was more efficient than periodic cumulative method. Full filling method had benefit to total DOC removal and control of average DOC concentration in effluent. Overall, periodic cumulative method is more efficient to equalize the removal efficiency of THMs and DOC, so the more frequent refilling of column with small amount of GAC is more advantageous.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.135-147
• /
• 2014

The wages of migrant workers about the rational discrimination and equal treatment have been treated partially. Foreign workers are also discussed in terms of the productivity and rational discrimination, but it is very limited. The Business community has been persisting that the minimum wage system for foreign workers should be excluded. Unlike local workers, migrant workers are relatively in that position with limited work place, a limited period of time to provide labor for the purpose of wage, in that points, the gap of the reality and the laws surrounding wages can be identified. This is expressed the conflicts and distress between employers and workers. Meanwhile, wages and equal treatment on the part of the study have been discussed, but it is hard to be organized clearly. Be related to this study, it will have a limitation. In this paper, since the employment permit system was enforced, the status of wages and distress and the factor of conflicts between the employer and the foreign worker examine and suggest the improvement plan for the law regarding wage.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.213-224
• /
• 2008

Flexible pavement responses to vehicular loading, such as critical stresses and strains, in each pavement layer, could be predicted by the multilayered elastic analysis. However, multilayered elastic theory suffers from major drawbacks including spatial dimension of a numerical model, material properties considered in the analysis, boundary conditions, and ill-presentation of tire-pavement contact shape and stresses. To overcome these shortcomings, three-dimensional finite element (3D FE) models are developed and numerical analyses are conducted to calculate pavement responses to moving load in this study. This paper introduces a methodology for an effective 3D FE to simulate flexible pavement structure. It also discusses the mesh development and boundary condition analysis. Sensitivity analyses of flexible pavement response to loading are conducted. The infinite boundary conditions and time-dependent history of calculated pavement responses are considered in the analysis. This study found that the outcome of 3D FE implicit dynamic analysis of flexible pavement that utilizes appropriate boundary conditions, continuous moving load, viscoelastic hot-mix asphalt model is comparable to field measurements.

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.67-80
• /
• 2001

This study is to propose temporal pattern of design rainfall which causes maximum peak discharge and to analyze the variation in peak discharge according to design rainfall durations. In this study, the Mononobe, the Yen and Chow triangular, the Huff's 4th quartiles and the Keifer and Chu methods are applied to estimate the proper temporal pattern of design rainfall and three rainfall-runoff models such as SCS, Nakayasu, and Clark methods are used to estimate the runoff hydrograph. And to examine the variability of peak discharge, the hydrologic characteristics from the rainfall-runoff models to which uniform rainfall intensity is applied are used as the standard values. The type of temporal pattern of design rainfall which causes maximum peak discharge in both of the watersheds and the rainfall-runoff models has resulted in Yen and Chow distribution method with the dimensionless vague of 0.75. On the basis of determined temporal pattern, the examination of the variability of peak discharge according to design rainfall durations shows that design rainfall duration varies greatly with the types of probable intensity formula, and the variation of peak discharge is more affected by the types of probable intensity formula and I-D-F currie than rainfall-runoff models.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.211-219
• /
• 2005

A selection of the analysis section for traffic accidents is used to analyze definitely the cause of accidents sorting similar accidents by a group and to raise the effect of improvement projects deciding the priority of accidents. In the existing method, an uniformly dividing method based on road mileages has been used, which has no consideration for similarities among accidents. Consequently, in recent, a slider-length method considering accident types rather than road mileages is widely used. In this study, using K-mean method, a non-hierarchical grouping technique used in the Cluster Analysis ai a applicatory method for the slider length method, a method classifies accidents that occurred the most nearby mileages into one group is proposed. To verify the proposed method, a comparison between the f-mean method and the dividing method at regular intervals on the data of a total of 25.6km lengths along Kyung-bu freeway in Pusan direction was made so that the K-mean method was proved to an effective method considering the similarities and adjacencies of accidents.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.27-34
• /
• 1997

In radiation therapy, the goal of three dimensional conformal radiation therapy(3DCRT) is to conform the apatial distribution of the prescribed radiation dose to the precise 3D configuration of the tomor, and at the same time, to minimize the dose to the surrounding normal tissues. To optimize treatment volume of tomor, treatment volume will be same tomor volume. Biological considerations need to be incorporated in the intensity modulation optimization process. Planning of intensity modulated treatment can irradiate more 20％ in tomor compare to conventional 3DCRT. In lung cancer and rectal cancer, planning of intensity modulated treatment showed optimizing dose distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4642-4647
• /
• 2011

Solution for elastic foundation of plane strain state was derived by the application of variational method. Functions of the transverse distribution of the displacements for the analysis were chosen as linear functions. Loading conditions considered for the analysis were concentrated load and distributed load. Under the loading condition of the concentrated load, surface displacement was decreased drastically as the distance from the point of the loading increased. Under the loading condition of the distributed load, surface displacements were more uniformly distributed beneath the loading area when the ratio of the half of the loading width to the depth(B/H) of the compressible layer was greater. The surface displacement was more quickly converged from the edge of the loading area as the ratio(B/H) increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.650-655
• /
• 2013

For the DC-free encoding of source data, the Guided Scrambling (GS) technique is widely used as multi-mode coding in the optical data storage system. For DC-suppression GS coding in the holographic data storage system, the conservative array and balanced coding criteria are proposed. In this paper, equivalent integer programming models are developed to determine the optimal control bits for the minimum digital sum value (MDSV), conservative array, and balanced coding criteria. Using the proposed integer programming models, we compare the performance of GS encoding for the various combination of control bit/array sizes and scrambling polynomials.

• The Korean Journal of Applied Statistics
• /
• v.26 no.3
• /
• pp.549-568
• /
• 2013

This paper discusses conversion methods between multiple decrement models and associated single decrement models. One of most popular assumptions on fractional age is UDD(uniform distribution of decrement) or constant force of mortality in actuarial practice. Instead of these assumptions, this paper suggests cubic spline interpolation to approximate the distribution of fractional age with the continuous force of decrements. Conversion formulas are derived. The comparisons of these two methods based on the numerical data show that the cubic spline interpolation approach is more accurate.