• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.167-175
• /
• 2003

In this study, reflection of regular waves over a train of submerged breakwaters is experimentally investigated. Wave reflection from various-shaped submerged breakwaters is examined by using laboratory experiment and eigenfunction expansion method. Shapes of submerged breakwaters are rectangular, triangular, trapezoidal and semi-circular. Laboratory measurements are compared with predicted coefficients obtained from the eigenfunction expansion method. Although measured coefficients are slightly smaller than predicted ones, the overall agreement is very good. The present study can provide a criterion for the proper choice of a shape of submerged breakwaters in practical situation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.301-312
• /
• 2012

This study investigates the wave height distributions in front of a perforated wall generated by obliquely incident monochromatic waves through laboratory experiments conducted in a wave basin. Attention is paid to the difference or similarity between a plain wall and a perforated wall. And the investigation is focused on the chamber width and side wall effects of a perforated wall on the propagation characteristics of waves. The main results of this study show that the normalized wave height along a perforated wall is a significant difference compare to a plain wall cases. The side wall in the chamber suppresses the growth of the stem waves.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.446-456
• /
• 2007

Numerical analyses of stem waves, the interaction between incident and reflected waves of obliquely incident regular waves along a vertical wall in a constant water depth, are presented. For the numerical model of the analysis, the two-layer Boussinesq equations developed by Lynett and Liu(2004a,b) are employed. Numerical results are compared with both laboratory measurements and those obtained using parabolic approximation model. The overall comparisons between the results from the two numerical models and the experiments are good. However, the two-layer Boussinesq model is more accurate than the parabolic approximation model as the angle of incident waves increases. In particular, the higher harmonic generation due to the wave nonlinearity is captured only in the Boussinesq model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.382-388
• /
• 2017

This study performed an OpenFOAM-based numerical modeling for simulating performance of wave reduction by a floating vertical plate. Based on the Waves2FOAM library, an internal wave generation and energy dissipation with sponge layers schemes were further implemented. The performance of wave generation and dissipation was first tested with a simple two-dimensional analysis. Then, numerical simulation was carried out with the experimental data of Briggs et al. (2001) for the two regular wave cases. In general, the modeling results agreed well with the experimental data, showing better agreement than the numerical analysis by WAMIT that is included in Briggs et al. (2001).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.3
• /
• pp.139-145
• /
• 1992

In this paper, a technique to separate the incident and reflected waves in the flume tests is investigated. Using a least squares method, the separation technique has been formulated systematically. This method is applicable to the regular and irregular wave conditions. To illustrate its validity and applicability, numerical experiments have been carried out for both regular and irregular wave conditions. It was found that the method gives perfect results for the conditions without signal noises, and yields reasonable results even for the conditions with 30% signal noises of incident wave height. Hydraulic experiments have been also performed to prove its applicability of the method for real situations.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.205-208
• /
• 2002

Numerous studies have been performed to develop an analytical model that can predict the reflection of regular or irregular waves from a perforated-wall caisson breakwater. Though such irregular wave models as Suh et at. (2001) become available, regular wave models are still in extensive use because of their simplicity. In the present study, using the regular wave model of Fuggazza and Natale(1992), the reflection of irregular waves from a perforated-wall caisson breakwater was calculated in several different methods. First, the regular wave model was re-validated by the hydraulic model tests. Though the model somewhat over-predicted the reflection coefficients at larger values and under-predicted them at smaller values, overall agreement was pretty good between calculation and measurement. Then, the regular wave model was applied to calculate the irregular wave reflection in the experiments of Suh et at.(2001) and Bennett et al. (1992). In applying the regular wave model to irregular wave reflection, several different methods were used. The results showed that it is the most reasonable to use the regular wave model repeatedly for each frequency component of the irregular wave specuum with the root-mean-squared wave height for all the frequencies .

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.158-168
• /
• 2001

A numerical model based on the wide-angle parabolic approximation equation is developed for the accurate simulation of the directional spreading and partial breaking of irregular waves. This model disintegrates the irregular waves into a series of monochromatic wave components, and the simultaneous calculations are made for each wave component. Then, the computed wave components are superposed to get the wave height of irregular waves. To consider the partial breaking of irregular waves in the computation the amount of energy dissipation due to breaking is estimated using the superposed wave height. The accuracy of the developed model is tested by comparing the numerical results with the experimental measurements reported earlier. In the case of non-breaking waves a considerable accuracy of the model is observed for both regular and irregular waves. On the contrary it is found that the accuracy is significantly degenerated for the case of breaking waves. Some analyses for the accuracy degeneration are presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.177-190
• /
• 2016

In case of the seabed around and under gravity structures such as submerged breakwater is exposed to a large wave action long period, the excess pore pressure will be generated significantly due to pore volume change associated with rearrangement soil grains. This effect will lead a seabed liquefaction around and under structures as a result from decrease in the effective stress. Under the seabed liquefaction occurred and developed, the possibility of structure failure will be increased eventually. Lee et al.(2016) studied for regular waves, and this study considered for irregular waves with the same numerical analysis method used for regular waves. Under the condition of the irregular wave field, the time and spatial series of the deformation of submerged breakwater, the pore water pressure (oscillatory and residual components) and pore water pressure ratio in the seabed were estimated and their results were compared with those of the regular wave field to evaluate the liquefaction potential on the seabed quantitatively. Although present results are based on a limited number of numerical simulations, one of the study's most important findings is that a more safe design can be obtainable when analyzing case with a regular wave condition corresponding to a significant wave of irregular wave.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.563-573
• /
• 2002

In this study, reflection of water waves over a train of rectangular submerged breakwaters is experimentally investigated. Measured reflection coefficients of regular waves are compared with predicted coefficients obtained from the eigenfunction expansion method. Although measured coefficients are slightly smaller than predicted ones, the overall agreement is very good.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1989

Theoretical studies have been made to analyze combined refraction diffraction of the wind waves propagating on a large scale current in water of varying depth. The governing equation for monochromatic waves was derived through splitting a mild slope equation into two equations. A numerical model is developed using finite difference scheme which is computationally very efficient for modelling large area. Numerical examples concerning the interactions between waves and rip currents over a gentle slope are presented, in which the current effects on the wave diffraction in the caustic region are closely examined.