• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.226-232
• /
• 1982

The measurements of the jerking force and the tail beat by hooked carp were carried out using a strain gauge at a fish pond from July to August 1981. The maximum jerking force was sustained for a while in the initial state after a carp was hooked, but the jerking force was gradually decreased as a function of the time elapsed until the fish was utterly exhausted, and it converged to the body weight at last. The results are as follows : 1. The maximum jerking force $F_m(g)$ can be expressed with empirical formula : $$F_m=3.23W+105$$ where W (g) is the body weight. 2. Dynamic change of the maximum jerking force $F_n(g)$ by one tail beat with time $t_{n}(-10T/2{\leq}\;t_n{\leq}10T/2)$ can he induced with the equation as follows : $$F_n=(0.27W-6.52)(|t_n|+C)^{-2.10}$$ where the period T (sec) is given by the following equation with the body weight : T=0.000385W+0.193 3. The jerking force at each of the peak points $F_p$ (g) varies with the time elapsed t (sec) as following equation : $$F_{p}=(2.23W+105)e^{-{\beta}t}+W$$. The value of durability index $\beta$ was nearly zero in the initial state and about 1.7 in the exhausted state at last. 4. It was clearly shown that the change of jerking force by hooked carp was closely related to the tail beat from a paired difference T-test.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.165-179
• /
• 2004

With the spread of wireless internet, the interest in mobile applications and services is increasing. Korea Wireless Internet Standardization Forum has been establishing the standards for mobile platform and map service in the wireless internet environment. This study aims to present a paragon of mapping middleware that plays the role of broker for wireless internet map service: in particular, it focuses on the interoperability with generic map servers. In this study, we developed a method for applying current map servers to the wireless internet map service, and analyzed the request/response structure of the map servers which have different operation characteristics in order to allow our middleware to fully utilize the functionalities of the map servers. The middleware we developed is composed of .NET-based XML Web Services: it has a lightweight module for image map and a map representation module for choropleth map, symbol map, chart map, etc. This mapping middleware is a broker between mobile client and generic map server, and supports .NET clients and Java clients as well. Its component-based interoperability grants the extensibility for the wireless internet dedicated map servers of the future in addition to the current generic map servers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.96-104
• /
• 2018

Military vessels are complex weapon systems consisting of various integrated onboard equipment. Since their acquisition of military equipment takes a long period of time and a prototype ship is deployed and tested, vessel development has relied on its proprietary process. However, due to the growing complexity of onboard equipment technology, application of systems engineering (SE) process has become indispensable. Nonetheless, an effective design process complementing the existing design with the SE has not yet been developed. As such, we have studied an improved basic design process for submarines based on SE. To do so, we analyzed the processes for the basic design, technical review, and requirement management. Included reviews and requirements are SRR, SFR and PDR, and SSRS, SSS, and SSDD. By combining the results in the SE framework, we built an improved basic design process that can be applied in parallel with the SE-based technical review and requirement management. To assess the process, we applied our proposed model to the submarine development undergoing the basic design phase. It is possible to effectively manage the requirements, design artifacts and improve traceability, and also utilize them as test and evaluation materials. The SE-based basic design process is expected to be useful in other kinds of vessel design.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.

• Journal of Broadcast Engineering
• /
• v.10 no.4 s.29
• /
• pp.557-575
• /
• 2005

Much research in core technologies has been done to make it possible the ubiquitous video services over various kinds of user information terminals anytime anywhere in the way the users want to consume. In this paper, we design plototypesystem architecture for the ubiquitous TV program content consumption based on user preference via various kinds of intelligent information terminals in digital home environment, and present an implementation and testing results for the prototype system. For the system design, we utilize the TV Anytime specification fur the consumption of TV program contents based on user preference in TV programs, and also use the MPEG-21 DIA (Digital Item Adaptation) tools which are the representation schema formats in order to describe the context information for user environments, user terminal characteristics, user characteristics for universal access and consumption of the preferred TV program contents. The proposed ubiquitous content mobility prototype system is designed to make it possible to seamlessly consume contents by a single user or multiple users via various kinds of user terminals for the TV program contents they watch together. The proposed ubiquitous content mobility prototype system in digital home environment consists of a home server, a display TV terminal, and an intelligent information terminal. We use 42 TV programs contents in eight different genres from four different TV channels in order to test our prototype system.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.107-114
• /
• 2012

We have developed a textile capacitive pressure sensor for smart gait analysis. The proposed system can convert sensor signal into step counts and pressure levels by different posture. To evaluate the performance of insole type textile capacitive sensor, we measured capacitance change by increment of weights from 10 kg to 100 kg with 10 kg increment using M1 class rectangular weights (four 20 kg weights and two 10 kg weights) which have ${\pm}10%$ tolerance. The result showed non-linearity characteristic of a general capacitive pressure sensor. The test was performed according to a test protocol for four different postures (sitting, standing, standing on a left leg and standing on a right leg) and different walking speeds (1 km/h and 4 km/h). Five healthy male subjects were participated in each test. As we expected, the pressure level was changed by pressure distribution according to posture. Also, developed textile pressure sensor showed higher recognition rate (average 98.06 %) than commercial pedometer at all walking speed. Therefore, the proposed step counts and posture monitoring system using conductive textile capacitive pressure sensor proved to be a reliable and useful tool for monitoring gait parameters.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.683-690
• /
• 2015

For demolition of offshore facilities, traditional methods such as jackhammer and explosive methods have been often used in construction industry. However, prohibitions for use of those methods are becoming more rigorous especially in environmentally and historically sensitive areas. It was also reported that the explosive demolition method on maritime bedrock can cause a disturbance of ecosystem. For those reasons, use of soundless chemical demolition agent(SCDA) is getting the spotlight. However, researches regarding the mechanical point of SCDA have seldom performed. There is no industrial standard for use of SCDA yet. In this study, a pilot experimental study in order to measure the required expansive pressure that could be generated from SCDA was conducted. Numerical models were developed in order to estimate the required expansive pressures of SCDA for initiating cracks depending on selected key parameters. Obtained results indicate that the required pressure does not decrease linearly as increasing the hole diameter, the number of holes, and the ratio of hole-distance to hole-diameter.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.205-214
• /
• 2012

IDPF, which builds formats and copyright protection standards of eBooks, has announced ePUB 3.0 as a technical standard of eBooks in October, 2011. This standard includes methods how to represent eBooks and technical specifications to protect eBook content. While technical specifications for content protection describe how to represent encryption and digital signature techniques, they do not identify any technical standards for rights expression but just file names for storages of rights information. It does not provide any unification of copyright information representation and formats used by eBook service companies. When copyright protection techniques for eBooks are used, comparability among eBook readers cannot be expected, even though there is a standard of ePUB. This study suggests a method to maintain compatibility toward eBook DRM by using unified rights information process under circumstances where different eBook service companies use diverse methods. The standard reference software of the model proposed in this study, together with other results of this study, will be offered as a registered open software.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.42-51
• /
• 2003

In this paper, we are going to analyze on relation of an output spectrum along phase distortion of power amplifier in wireless LAN system, and then considered an ACPR characteristic of power amplifier and consideration of an OFDM method for this. Also, we did implementation for OFDM modulation and transmission section of an IEEE 802.11a standard to have transmission speed of the maximum 54Mbps in order to know an OFDM modulation method and relation of non-linear characteristic of power amplifier. The non-linear characteristic of power amplifier did modeling with AM-to-AM and AM-to-PM, and we analyzed an output spectrum characteristic along phase distortion composed input signal supply for power amplifier. When output spectrum analysis results phase distortion increased, and an AM-to-PM characteristic of power amplifier in 5 degrees, the output spectrum was satisfied with a demand spectrum in P1 dB, but 10-20 degrees were able to confirm what cannot be satisfied with a demand spectrum in phase distortion. Also, an output spectrum of power amplifier by frequency re-growth generated by a non-linear characteristic of power amplifier did not satisfied in P1dE. therefore, a back-off value was requested according to an AM-to-PM distortion degree, and smaller back-off value were able to know what demand became in case of modulation section that used OFDM.