• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.6
• /
• pp.456-465
• /
• 2003

It is well-known that bio-systems does not calculate inverse dynamics for trajectory planning, but they move by proper modulation of system impedances. Inspired by bio-systems, a biomimetic trajectory planning method is proposed in this work. This scheme is based on employment of redundant actuation which prevails in bio-systems. We discuss that for the generation of the biomimetic trajectory, intelligent structure of bio-systems plays an important role. Redundant actuation and kinematic redundancy fall into such a category of intelligent structure. The proposed biomimetic trajectory planning modulates the complete dynamic behavior such as natural frequencies and damping ratios by using the intelligent structure. Experimental work is illustrated to show the effectiveness of the proposed biomimetic trajectory planning for a five-bar mechanism with redundant actuators.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1604-1608
• /
• 2008

최근 기상이변 등에 따라 빈번히 발생하는 이상홍수에 대비하여 댐의 안정성 확보를 위한 댐설계기준이 강화되었고, 이에 따라 가능최대홍수량(PMF) 유입시 댐의 항구적인 안전성 확보를 위하여 치수능력 증대사업이 필요하게 되었다. 본 연구에서는 안동댐의 치수능력 증대사업의 일환으로 계획된 비상여수로에 대하여 2차원, 3차원 수치모형실험을 통해 비상여수로의 수리학적 안정성과 기능성을 검토하였다. 최적의 설계안을 결정하는데 필요한 자료를 제공하기 위하여 접근수로의 유황, 월류위어의 방류능력, 급경사수로 및 감세공의 유황을 검토하였다. 특히, 월류위어의 교각형상에 따른 수면형상, 조절부의 제원에 따른 방류량 검토, 조절부의 평면형상에 따른 유황, 급경사수로의 종단경사에 따른 유황, 저유량 방류시 플립버킷부에서의 사출궤적 등에 대한 검토 등을 수행하였다. 본 연구결과, 수치모형실험은 설계자에게 실용적인 해석도구로 사용될 수 있음을 보일 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.896-899
• /
• 1996

A new algorithm for planning a collision free path is developed based on linear parametric curve. A collision-free path is viewed as a connected space curve in which the path consists of two straight curve connecting start to target point. A single intermediate connection point is considered in this paper and is used to manipulate the shape of path by organizing the control point in polar coordinate (.theta.,.rho.). The algorithm checks interference with obstacles, defined as GM (Geometry Mapping), and maps obstacles in Euclidean Space into images in CPS (Connection Point Space). The GM for all obstacles produces overlapping images of obstacle in CPS. The clear area of CPS that is not occupied by obstacle images represents collision-free paths in Euclidean Space. Any points from the clear area of CPS is a candidate for a collision-free path. A simulation of GM for number of cases are carried out and results are presented including mapped images of GM and performances of algorithm.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.462-466
• /
• 1989

This paper describes the methods of spline low-order polynomial trajectory planning using only a few limited look-ahead knots on the desired trajectory for the real-time computing. Specifically presented are the mixed joint trajectory planning methods which apply linear or LSPB method to initial and finial segments, overlapped cubic spline method to the other segments, where the displacements for initial and finial segments are chosen to be relatively smaller than the displacements for the other, equidistant segments. Experimental and simulation results of these methods show smooth motions and improved path tracking performances compared with any other interpolated joint trajectory planning methods.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.307-309
• /
• 1993

Robot's kinematic equation is not perfect. In this paper, a method for reducing the positioning error which comes from the imperfect robot kinematics is introduced. This method compensates the parameter of the kinematic equation using real positioning error. And the trajectories using these compensated parameterare compared with uncompensated ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.959-964
• /
• 1992

This study treats the method for kinematic modeling of the biped walking robot, for synthesizing various gait trajectories, and for calculating adequate values of the joint torque inside the stable region. To synthesize various and anthropomorphic walking easily, the gait trajectory is specified by a set of ten walking prameters, and the trunk motion equation is derived by the zero moment point and the gait trajectory. By distributing ground reaction force and moment reduced at the zero moment point to the both feet, the joint torque equation can be derived readily, and according to this equation, the joint torque to stable walking can be computed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1793-1794
• /
• 2008

본 연구는 다양한 환경에서의 인간형 로봇의 안정적인 보행을 하기위한 FSR (Force Sensing Resistor) 센서 기반의 보행패턴에 관한 전체 시스템의 설계와 이의 모의실험이다. 인간형 로봇의 안정적인 보행을 구현하기 위해서는 보행 패턴의 ZMP(Zero Moment Point) 궤적이 안정 영역 내에 위치하게 하여야 하고, 실제 보행 중에도 외부의 환경적인 요인과 내부의 제어 오차에 따라 보행패턴의 수정과 보완이 요구된다. 이에 FSR 센서를 적용하여 전체 인간형 로봇의 보행 시스템을 설계하고 안정적인 다양한 보행을 구현하기 위한 보행패턴을 제안한다. 이를 모의실험을 통해 평지, 계단, 경사면에 따른 보행 안정성을 검증한다. 차후 이러한 모의실험 결과를 보완하여 FSR 센서를 실제 인간형 로봇에 장착하고 실험하여 안정적인 보행을 구현할 계획이다.

• IE interfaces
• /
• v.3 no.2
• /
• pp.23-38
• /
• 1990

The use of robots for painting operations is a powerful alternative as a means for automation and quality improvement. A typical method being used for motion planning of the painting robot is to guide the robot along the desired path : the "lead-through" method. Although this method is simple and has been widely used, it has several drawbacks a) The robot cannot be used during the teaching period, b) A human is exposed to a hostile environment, c) The motions taught are, at best, human's skill level. To deal with the above problems, an integrated robot-trajectory planning scheme is presented. The new scheme takes CAD data describing the shape and geometry of the objects, and outputs an optimal trajectory in the sense of coating thickness and painting time. The purpose of this paper is to investigate theoretical backgrounds for such a scheme including geometric modeling, painting mechanics and robot trajectory planning, and develop algorithms for generating spray gun paths and minimum-time robot trajectories. Future study is to implement these algorithms on an workstation to develop an integrated software system ; ATPS(Automatic Trajectory Planning System) for spray painting robots.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.2
• /
• pp.75-80
• /
• 2016

This study proposes a efficient technology to control the optimal trajectory planning and real-time implementation method which can perform autonomous travelling for unmaned factory automation. Online path planning should plan and execute alternately in a short time, and hence it enables the robot avoid unknown dynamic obstacles which suddenly appear on robot's path. Based on Route planning and control algorithm, we suggested representation of edge cost, heuristic function, and priority queue management, to make a modified Route planning algorithm. Performance of the proposed algorithm is verified by simulation test.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.3
• /
• pp.143-148
• /
• 2001

A lot of robot trajectory tracking methods are proposed to enhance the tracking error, but irregular tracking errors are always accompanied and very hard to reduce it. Up to now, these irregular tracking errors are reduced by introducing more complicated control algorithms. But, it is intuitively obvious to reduce only the big errors selectively in the irregular ones for the better performance instead of using more complicated control algorithms. By the characteristics of the robot, big tracking errors of the end-effector are generated mostly due to the fast moving of joint. So, in this paper, we introduce a new method which reduce the big tracking errors by clippings the joint velocity with the constraint of given path. Using this method, desired trajectory tracking is obtained within the far reduced error bound. Also, this method is successfully applied to generate the path-constrained error reducing trajectories for 2-axis SCARA type robot.