Eddies and surface current field in the southwestern part of the East Sea were investigated using satellite-tracked drifters, CTD, and ADCP from November 1992 to September 1993. Trajectories of surface drifters provided information for the first time on the meandering motion of the East Korean Warm Current in the Ullung Basin (referred as UB) and clearly indicated the existence of cyclonic and anticyclonic eddies of various scales. Anticyclonic eddies persisting for a relatively long period were observed in UB and the southwestern corner of the Northern (Japan) Basin (SNB), while a cyclonic eddy was found in the coastal area between Sokcho and Donghae during the summer. Analysis shows that the eddy in UB behaved as a stationary eddy at least during the observation period and the cyclonic eddy was closely related to the existence of a cold water mass. The anticyclonic eddy in SNB was larger than that in UB, but much elongated in shape. The eddy in UB is characteristic of major and minor axes of about 120 and 70 km, revolution period of 13.6 days, mean swirl velocity of about 24 cm/s, and mean eddy kinetic energy of 392 cm$\^$2//s$\^$2/. The eddy in SNB is described as follows; major and minor axes of 168 and 86 km, period of 14.9 days, mean swirl velocity of 29 cm/s and mean eddy kinetic energy of 629 cm$\^$2//s$\^$2/. The mean translational speed is about 3 cm/s for both eddies. The agreement of the surface current pattern in UB observed by ADCP with the geostrophic flow pattern may suggest that the eddy in UB was nearly in geostrophic balance. The eddy was found to be strongly bottom-controlled.
Proceedings of the Technology Innovation Conference
/
2003.06a
/
pp.41-56
/
2003
다양한 제품들이 존재하는 시장에는 타 제품에 비하여 품질대비 가격이 낮은 혁신적인 경쟁력있는 제품과 그렇지 못한 제품들이 혼재하고 있다. 그러나 정보의 부족(limited information), 제한적 합리성(bounded rationality) 등 여러 가지 원인으로 인하여 혁신적인 제품들만이 소비자들에게 선택되어 소비되는 것은 아니다. 본 연구에서는 이러한 현상을 설명하기 위하여 소비효율성(consumption efficiency)라는 개념을 도입, 제시하고자 한다. 만약 소비효율성이 극도로 낮다면 혁신적인 제품을 내어놓는다 하더라도 소비자들에게 선택되어 이윤이 발생될 확률이 낮기 때문에 생산자 입장에서는 혁신의 유인(innovation incentive)이 낮아질 수밖에 없게 된다. 이처럼 소비효율성의 문제는 혁신의 유인과 결과를 이해하는데 중요한 단초를 제공할 수 있게 된다. 이에 반하여 혁신을 이해하기 위한 기존의 분석틀은 생산경제이론(production economics)에 기반하고 있고, 효율성의 개념도 생산효율성(production efficiency) 혹은 기술적 효율성(technical efficiency)의 범주에서 다루어져 왔다. 본 연구에서 제시하는 소비효율성의 개념은 효용이론에 근거하고 있다는 점에서 기존 연구와 차별화된다. 본 연구는 효용함수 극대화이론에서 출발하여 경계헤도닉함수(frontier hedomic function)을 도출하는 이론적 유도과정을 제시한다. 실증분석을 위해서는 SFA(Stochastic Frontier Analysis)의 방법론 체계를 적용하였다. 제시된 분석틀은 국내 PC산업의 데이터에 적용되었다. 분석의 결과 몇 가지 가정하에 국내 PC산업이 약 13%정도의 비효율성을 안고 있는 것으로 판단할 수 있으며, 초기혁신구매자(early adopter)들은 일정 정도의 비효율성을 기꺼이 감수할 것으로 분석되었다. 궤적 분석에서는 각 산업별 기술의 특성을 분석하는 것으로, 특정 기술 지식의 활용 기간을 통해 기술 주기를 도출하고, 산업 내 평균 권리 청구 항목 수를 이용하여 각 산업의 기술 범위를 비교하였다. 각각의 동적 분석을 통해 시간에 따른 변화 양상이 관찰하였고, ANOVA 분석을 이용하여 통계적 유의성을 검증하였다. 본 연구는 현재의 기술 패러다임 내에서 Pavitt이 제시한 산업 분류의 근거를 보충 설명하였고 특허 정보를 이용하여 기술혁신의 산업별 유형에 대한 폭넓은 분석방법을 제시하였다.별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control. In case of R-20458, the increasing
Since the beginning of the millennium, 'Maker Movement' has been active throughout the world. Today, there is a maker fair every year in major cities of the world including Seoul, and the number of attendees is increasing day by day, so it can be seen as a kind of maker 'phenomenon'. The positive implication of the maker's movement is that it attempts to break down the monopoly of manufacturing and to restore the rights and capabilities of citizens as makers. Today, highly developed industrial capitalism has a tendency to structurally paralyse citizens, to tie their hands and feet, and to degenerate into consuming entities only. Therefore, it can be said that the maker movement has structural tensions in the relationship of neoliberal manufacturing culture. This study is an attempt to actively interpret the maker movement in terms of "critical making". The maker movement can trace its origins to "counterculture" and "new communalism" that emerged in the United States in the 1960s and 1970s. On the other hand, there is criticism that the maker movement can fall into another technology utopianism and function as an area of consumer society, and mobilize it in the direction of activating consumerism. Although the maker's movement is amorphous due to its characteristics and it is currently in progress, it is difficult to make crude definition yet. However, as the citizens who have been defined only as consumers of science and technology, are newly emerging as producers of makers, there have been great changes in the topography of science and technology and civil society. So the scientific implication of the maker movement is great in that it shows the possibility of causing it.
This study explores the effects on development of poor children by community-based orchestra educational activities and the orchestra educational activities factors for promoting the effects using longitudinal data are those collected for "The Evaluation of the Impact of Our Neighborhood Orchestra on Children's Learning" made by the Seoul Philharmonic Orchestra. For these purposes, this study employed a latent growth model analysis of the factors such as depression, aggressive behavior, communality and interpersonal relationship of development of poor children and evaluation, satisfaction, outsiders'attention and participation of facilitative factors. The result shows that they displayed significantly positive development in depression, aggressive behavior, and interpersonal relationship. It appears that the evaluation on music achievement had a positive impact on the rate of change in communality, while the evaluation on attitude had an impact in the initial value of depression, aggressive behavior, and communality, also the sense of satisfaction had a positive impact on the initial value of communality and interpersonal relationship in conditional models. And parents' attention and participation had a negative impact on the initial value of aggressive behavior, while the attention and participation of the community showed a positive impact on the initial value of depression and aggressive behavior. Based on these results, this study attempted to broaden the understanding of the development of poor children taking part in orchestra-based educational activities and provide a practical basis for social workers' direct invention, and look for new ways by shedding light on the merits of the cultural/art education of poor children that engage in the community-based orchestra educational activities.
Journal of the Institute of Electronics and Information Engineers
/
v.49
no.11
/
pp.47-55
/
2012
In this paper, we propose a method to reconstruct accurate 3D shape object by using multi-view images which are disturbed by motion blur. In multi-view deblurring, more precise PSF estimation can be done by using the geometric relationship between multi-view images. The proposed method first estimates initial 2D PSFs from individual input images. Then 3D PSF candidates are projected on the input images one by one to find the best one which are mostly consistent with the initial 2D PSFs. 3D PSF consists with direction and density and it represents the 3D trajectory of object motion. 야to restore 3D shape by using multi-view images computes the similarity map and estimates the position of 3D point. The estimated 3D PSF is again projected to input images and they replaces the intial 2D PSFs which are finally used in image deblurring. Experimental result shows that the quality of image deblurring and 3D reconstruction improves significantly compared with the result when the input images are independently deblurred.
Transactions of the Korean Society of Mechanical Engineers B
/
v.35
no.9
/
pp.939-946
/
2011
In thermal power generation companies, the recycling of refined ash (LOI < 6%) obtained from a PC-firing furnace is beneficial for the companies, e.g., it can be used for making lightweight aggregates. However, ash having a high LOI, which cannot be reused, is still buried in the ground. To obtain refined ash, the re-burning of high-LOI ash (LOI > 6%) in a PC-firing furnace can be an alternative. In this study, a numerical analysis was performed to demonstrate the effects of ash re-burning. An experimental constant value was decided by TGA (thermo-gravimetric analysis), and a DTF (drop-tube furnace) was used in the experiment for calculating the combustion of ash. On the basis of the trajectory of the moving particles of coal and ash, it was concluded that supplying ash near the burner, which is located high above the ground, is appropriate. On the basis of numerical results, it was concluded that an ash supply rate of 6 ton/h is suitable for combustion, without affecting the PC-firing boiler.
The C-ITS requires the lane level positioning of the vehicle in the land transportation environment, and it is most effective to utilize the global navigation satellite system. In the precision positioning system based on satellite navigation, the evaluation of dynamic environment of lane level positioning performance should be accompanied and the evaluation system configuration should be preceded. In addition, performance analysis must be performed according to various environments that change according to traffic or road conditions in a dynamic environment. In this paper, we describe with the performance of traffic and road environment through the evaluation system of lane positioning precision positioning user system based on satellite navigation system. The numerical performance evaluation was carried out based on the data collected by carrying out the actual driving. The performance evaluation by the actual driving trajectory and driving image comparison was performed to derive and analyse evaluation results of positioning performance according to driving condition.
This study develops a control algorithm on berthing/unberthing system using a joystick for ships with thrusters and a rudder. A nonlinear mathematical model for low speed maneuvering of typical container ships is used to develop a MIMO(multi-input multi-output) nonlinear control algorithm for velocity feedback joystick control. Also a virtual HILS(hardware in the loop simulation) software program for berthing/unberthing is developed to test the performance of the nonlinear and a PID control algorithm. The program is developed using LabWindow/CVI, and a user can see current position and desired trajectory of ship in a monitor, then he can control forward and yaw velocities of a ship using a joystick. The simulation results show that the nonlinear mfd the PID controller have superior performance over a simple open loop joystick control algorithm.
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.4
/
pp.337-345
/
2020
This study analyzed the longitudinal trajectories of father's depression and the changes of relevant parenting practice in fathers' as well as the problematic behaviors and school adaptation of their children. To address these goals, the data from 1,172 samples from the 4th to 8th Korean Children and Youth Panel Survey (KCYPS) was analyzed. The results of this study indicated that the fathers' depressive levels are classified into three latent groups: 1) the high-changing group, 2) the middle-low changing group, and 3) the low-low changing group. The results also revealed that the fathers within the low-low changing group practiced more authoritative but permissive parenting than the fathers in the two other groups. Children from high-changing group showed more problematic behaviors than the children of the two other groups. In addition, the children from the low-low changing group reported higher school adjustment such as academic achievements, and relationships with peers and teachers. Based on these findings, the study discusses the implications for social work practice and further studies.
Journal of the Korean Institute of Intelligent Systems
/
v.19
no.3
/
pp.388-397
/
2009
There are many tasks which require robotic manipulators interaction with environment. It consists of three control problems, i.e., position control, impact control and force control. The position control means the way of reaching to the environment. The moment of touching to the environment yields the impact control problem and the force control is to maintain the desired force trajectory after the impact with the environment. These three control problems occur in sequence, so each control algorithm can be developed independently. Especially for redundant manipulators, each of these three control problems has been important independent research topic. For example, joint torque minimization and impulse minimization are typical techniques for such control problems. The three control problems are considered as a single task in this paper. The position control strategy is developed to improve the performance of the task, i.e., minimization of the individual joint torques and impulse. Therefore, initial conditions of the impact control problem are optimized at the previous position control algorithm. Such a control strategy yields improved result of the impact control. Similarly, the initial conditions for the force control problem are indirectly optimized by the previous position control and impact control strategies. The force control algorithm uses the individual joint torque minimization concept. It also minimizes the force disturbances. The simulation results show the proposed control strategy works well.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.