• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.171.2-171.2
• /
• 2012

위성 개발에서 추력기는 위성의 경사각 및 고도 등의 궤도 제어 용도 이외에 위성 동작 초기 혹은 비상 상황에서 안정적인 전력 공급을 위한 자세 제어용 구동기로 사용되어야 하므로 매우 높은 신뢰성을 필요로 한다. 국내의 실용위성을 위해 개발되어 사용되고 있는 출력기는 1 파운드의 작은 용량으로 위성 운영에 일부 제약을 주게 된다. 본 논문은 위성 운영에 있어 반드시 필요한 궤도 천이 절차와 관련하여 기존에 사용된 절차를 보완하기 위한 방법에 대해 기술한다. 기존에 개발된 위성에서는 궤도 조정을 위한 자세 변화에 추력기를 사용하였다. 그러나 위성의 무게가 커짐에 따라 자세 변환을 위한 시간이 오래 걸려 궤도 조정 효율이 떨어지는 요인이 되고 있다. 뿐만 아니라, 자세 변화 과정에서 벡터 방향의 추력으로 인해 원하지 않는 궤도 변화가 생기므로 정밀 궤도 결정에도 영향을 주게 된다. 최근에 개발된 위성의 경우, 위성의 기동 성능을 높이기 위해 고성능 반작용 휠을 사용하므로 이를 이용하여 궤도 천이 전에 자세 변화를 하도록 하고 있다. 이러한 방법을 적용한 결과, 정밀 궤도 결정에 도움이 될 뿐만 아니라 자세 변화로 인한 연료 소모를 줄이는 효과도 있어 위성의 수명 연장에 도움이 되는 것으로 확인되었다.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.72-78
• /
• 2024

It is essential to coincide with moving target planet at future arrival changing point during space flight time in an interplanetary orbit design. Transition orbit elements can be obtained from traditional Lambert solutions by adjusting initial and final positions include flight time. Two-point boundary values of orbits can be selected in the design process. From this point of view, interplanetary orbits are infinite if they can be acquired from departure velocity without limit. However, appropriate and optimized procedures are needed to obtain an optimum interplanetary orbit to meet given conditions. The departure velocity is highly dependent on space launch vehicle's ability up to now. In this paper, algorithms of professor Howard Curtis at Embry-Riddle Aeronautical University were applied to obtain Lambert solution and orbit elements.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.50-56
• /
• 2010

Most mission trajectory design technologies for space exploration have been utilized the Patched Conic Approximation which is based on Hohmann transfer in two-body problem. The Hohmann transfer trajectory is basically an elliptic trajectory, and Patched Conic Approximation consists of Hohmann transfer trajectories in which each trajectory are patched to the next one. This technology is the most efficient method when considering only one major planet at each patch trajectory design. The disadvantages of the conventional Patched Conic Approach are more fuel (or mass) needed and only conic trajectories are designed. Recent space exploration missions need to satisfy more various scientific or engineering goals, and mission utilizing smaller satellites are needed for cost reduction. The geometrical characteristics of three-body dynamics could change the paradigm of the conventional solar system. In this theoretical concept, one can design a trajectory connecting around the solar system with comparably very small energy. In this paper, the basic three-body dynamics are introduced and a spacecraft mission trajectory is designed utilizing the three-body dynamics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.66-69
• /
• 2006

A two-dimensional Particle-In-Cell (PIC) simulation of a Hall thruster is presented. The thruster is being developed for orbit transfer and correction of a small satellite. Preliminary investigation of the simulation result finds well separated acceleration and ionization layers. The simulation further shows that collisional ionization of the xenon neutrals allows sufficient acceleration of the ionized plasmas that is adequate for the intended correction and transfer of small satellite orbits. Anticipated performance of the thruster based upon the present results will be calculated.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.427-436
• /
• 1998

The apogee manoeuvre of $KOREASAT-1{cdot}2{cdot}3$ is basic elliptical orbit transfer converting orbit plane. The KOREASAT-3 is planed for multi-burn manoeuvres using the liquid apogee engine while the $KOREASAT-1{cdot}2$ used the apogee kick motor that executes a single burn in the apogee of transfer orbit using the solid propellant. This study analyzed the multi-burn manoeuvres using the liquid apogee engine and the propellant control method and developed the simulation tools. For the purpose of precise simulation, We designed tools in the basic of orbit propagation software, COWELL5, that was developed by members of Center for Astrodynamics in Yonsei university and the results can be displayed in 3-D graphic of $STK/VO^{TM}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1142-1155
• /
• 2014

The classical PCM/PSK/PM scheme has been commonly used for TC & R applications between satellites and ground stations in the S-band. We analyzed TC & R link performance between ground station and the geostationary satellite which employs PCM/PSK/PM, when the satellite are particularly on the Super Synchronous Transfer Orbit(SSTO). The satellite parameters on SSTO are assumed to be those operating on the geostationary orbit, considering heritage aspect. In the uplink, the results shown indicate that sufficient margins over 3 dB are obtained when the EIRP of ground station is greater than 65 dBW. The down link performance is of great interest. By adjusting the telemetry modulation index and ranging modulation index, we could obtain the required margin of 3.0 dB in the down link, and find out the minimum G/T of ground station. In conclusion, the previously operated ground stations during LEOP at COMS launch, can be operational when GEO injection is made using SSTO(65,000 km and 70,000 km).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.770-778
• /
• 2013

Solar sail propulsion uses solar radiation pressure to propel spacecraft without propellant, and it is useful for deep-space missions and continuos orbit maneuver missions. After a brief introduction of solar sail dynamics, locally optimal trajectories in Sun-centered and Earth-centered orbits are analyzed. Numerical simulations for the optimal trajectories are performed. Trajectory for the rendezvous with Halley comet is generated, and different planet escape methods are compared.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.684-692
• /
• 2010

Based on the planar restricted three body problem formulation, optimized trajectories for the Earth-Moon transfer are obtained. Mixed impulsive and continuous thrust are assumed to be used, respectively, during the Earth departure and Earth-Moon transfer/Moon capture phases. The continuous, dynamic trajectory optimization problem is reformulated in the form of discrete optimization problem by using the method of direct transcription and collocation, and then is solved using the nonlinear programming software. Representative results show that the shape of optimized trajectory near the Earth departure and the Moon capture phases is dependent upon the relative weight between the impulsive and the continuous thrust.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.24-25
• /
• 1998

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.162.2-162.2
• /
• 2012

한국형 발사체 KSLV-2의 발사능력을 고려하면 달 탐사선의 총 무게는 약 550kg이 된다. 따라서 달 탐사선에 탑재할 수 있는 탑재체 무게를 최대화하기 위해서는 지구에서 달로 가는 천이궤적을 가장 효율적으로 설계하여 연료 소모량을 최소화하여야 한다. 본 연구에서는 최근에 달 탐사 천이궤적으로 가장 많이 사용되고 있는 Weak Stability Boundary 천이궤적에 관해 연구를 수행하였다. Weak Stability Boundary 천이궤적은 지구로부터 출발한 후 원지점 약 1.4 km(지구-태양의 L1 점 근처)까지 비행한 후 태양풍을 통해 에너지를 얻어 근지점 거리를 지구-달 거리만큼 증가시켜 LOI(Lunar Orbit Injection)시 ${\Delta}V$를 최소화하여 달 궤도에 들어가는 방법이다. Weak Stability Boundary 천이방법의 TLI(Trans Lunar Injection) 값은 직접천이 방법의 TLI 값보다 더 크지만 달 궤도 진입에 필요한 LOI ${\Delta}V$값은 25% 정도 덜 든다는 장점이 있다. 이 방법은 일본의 Hiten 탐사선이 최초로 사용하였으며, 달에 도착하기까지 수개월이 걸리는 단점이 있다. Weak Stability Boundary 천이궤적 시뮬레이션을 통해 최대로 절약할 수 있는 연료 소모량을 확인할 수 있었으며, 다른 천이방법들과의 장단점 비교를 통해 한국형 달 탐사선의 지구-달 천이궤적 후보로 사용 될 수 있음을 확인하였다.