• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.123-128
• /
• 2022

This paper proposes a non-explosive separation device for the deployable SAR antenna. This device utilises a Ni-Cr wire to restrain the antenna's belt mechanism, and joule-heating is used to minimise the impact of deployment. After the Ni-Cr wire has been cut, the device is deployed through the preload of the belt mechanism. Considering the design load(99g) and preload conditions, FEM analysis for AL7050 and Ti was performed. This analysis revealed that the amount of deformation for AL7050 was 0.256 mm with a margin of +0.09. In addition, by performing orbital thermal analysis, the temperature distribution for AL7050 in the worst cold case is confirmed as -50 to +2℃ and -10 to +90℃ in the worst hot case. This analysis confirmed that the separation device would remain stable even in the worst environment.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.502-509
• /
• 2023

This study presents a satellite constellation method that achieves optimal revisit performance by utilizing genetic algorithm techniques. The Walker method is a global coverage concept, and there are limitations to target-centered constellation considering the strategic environment of the Korean Peninsula. To overcome these limitations, targets are set in major areas of interest in North Korea, orbit elements with optimal revisit performance for each target are searched, and based on this, the number of satellites optimized for each target is derived using a genetic algorithm. The results of this study demonstrate the performance of the optimized constellation by applying phasing rules to achieve the desired revisit performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8812-8819
• /
• 2015

In a situation in which importance of rail fastening system is growing with increasing the construction of concrete track, an accident of tension clamp(the component of rail fastening system) breaking has been recently occurred. This results from various factors such as field condition, operating agency, running condition, traffic frequency and so on. Thus, the study for the behavior of tension clamp is required. In this paper, an experiment and finite element analysis(FEA) have been performed to analyse the mechanical behavior of tension clamp. The stress and displacement of tension clamp have been analyzed as the clamping force through a laboratory test, and they were compared with FEA results. Furthermore, the stress and displacement of the tension clamp are derived from train load condition applying the verified model, and the fatigue vulnerability of the tension clamp is identified through stress analysis.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.53-62
• /
• 2015

LWDT was developed for use as an alternative technique to measure the stiffness of trackbed soils. In this study, numerical and theoretical analyses of LWDT's acting mechanism were performed. The effectiveness of the adapted elastic formula used for calculation of the dynamic modulus, Evd, was investigated theoretically and also numerically by running ABAQUS analysis. The minimum thickness of the upper layer is proposed based on the analysis. Correction factors for the formula of elastic modulus are also proposed in this study. In the future, following field test results and laboratory mechanical tests such as the resonant column test, a guideline for the use of LWDT as a standard test protocol in track construction sites, as a measuring tool for the degree of compaction and/or stiffness and dynamic modulus, will be proposed based on this analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.38-46
• /
• 2017

In this study, a query language was developed to supplement the information retrieval and model regeneration in the case of Industry Foundation Classes (IFC)-based civil infrastructure information models. First, the IFC objects to represent the structural components, entities to manage the related properties, and relationships to connect with the mentioned elements were analyzed in a point of information flow. The results confirmed that the end-users could have problems with access and comprehend the properties and its relationships in the IFC file. Second, the IfcPropertySet-focused query method and applicable stand-alone module were proposed referring to the previous Building Information Model Query Language (BimQL). The availabilities of the proposed method were examined using the rail and sleeper information models through information retrieval and model regeneration. The most important advantage of the proposed approach is the IFC-based information retrievals that can guarantee the interoperability between software packages.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.81-93
• /
• 2001

Far ultraviolet IMaging Spectrograph (FIMS) should be designed to maintain its structural stability and to minimize optical performance degradation in launch and in operation enviroments. The structural and thermal analyzes of grating and grating mount system, which are directly related to FIMS optical performance, was performed using finite element method. The grating mount was made to keep the grating stress down, while keeping the natural frequency of the grating mount higher than 100 Hz. Transient and static thermal analyzes were also performed and the results shows that the thermal stress on the grating can be attenuated sufficiently. The optical performance variation due to temperature variation was with the allowed range.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.140-150
• /
• 2002

The planar tracked vehicle model used in this investigation consists of two kinematically decoupled subsystems, i.e., the chassis subsystem and the track subsystem. The chassis subsystem includes the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints. In this study, the recursive kinematic and dynamic formulation of the tracked vehicle is used to find the vertical terce and the distance of an arbitrary track moved in the driving direction along the track. These distances and vertical forces obtained are used to get the deformation and sinkage of a terrain. The FEM(Finite Element Method) is adopted to analyze the interaction between tracked vehicle and terrain. The terrain is represented by a system of elements wish specified constitutive relationships and considered as a piecewise linear elastic, plastic and isotropic material. When the tracked vehicle is moving with different speeds on the terrain, the elastic and plastic deformations and the maximum sinkage for the four different types of isotropic soils are simulated.

• Journal of Astronomy and Space Sciences
• /
• v.6 no.2
• /
• pp.101-108
• /
• 1989

The algorithm was developed for the estimation of orbital decay of the Soviet Satellite COMOS 1402 which divides into three body-COSMOS 14020-A, B and C-and fell down early in 1983. The perturbation effects due to the nonspherical geopotential and air drag were considered and the standard atmospheric model were built for obtaining the atmospheric density as a function of the height. The orbital elements of NASA GSFC during orbital decay used in estimation of orbital decay. We compared the estimation values with the published ones of the American State Department. In the case of COSMOS 1402-C, the estimated values accorded with the published ones but, in the case of COSMOS 1402-A, the decay time and the approximated position differed respectively one minute and two degrees in both latitude and longitude from the published ones.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.173-180
• /
• 2000

All times of minimum light of V651 Cas, which is still less studied so far, were analyzed. From our analysis, it was found that the orbital period of the system may have varied in a periodic manner. After assuming that the period change is produced by the light-time effect due to a third body in the system, attempts to derive the orbital elements of the light-time orbit were made. The resultant values for the period, semi-amplitude, and eccentricity of the light-time orbit were 6.${y}^{25}$, 0.${d}^{0013}$, and 0.77, respectively. The future observations of times of minimum light of V651 Cas are needed to confirm the existence of the third body we suggested in this paper.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.396-404
• /
• 2009

With developing the next generation high speed railway, there need to be plans to make sure of running safety though researchs on the crack and break of rail by rolling contact fatigue. Therefore, this study performed the parametric analysis effecting on the fatigue life of rail using simplified equations. It analyzed the internal stress of rail according to the track quality, train velocity, wheel radius, track stiffness, sleeper space, wheel load. For the more, via the finite element method, it analyzed shear force on the rail head which could be changed by the early length of crack, angle of crack and temperature. As a result, this study continued the main parameter effecting on the fatigue life of rail.