• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.125-132
• /
• 2006

In the present study, in order to elucidate the vibration characteristics of track and train body according to the type of track in tunnel, the vibration accelerations of the track and the KTX train body have been measured in tunnels of Kyong-Bu high-speed railway(HSR) lines, and the frequency analysis of the measured data has been performed. From this, the vibration characteristics of the track components such as rail, sleeper, ballast and slab, the tunnel lining and the vehicle body according to the type of track are investigated and their relation is analyzed. The test results show that the vibration of rail and vehicle body rapidly increases at 80Hz in tunnel, and that is much higher in the tunnel on which the concrete slab track is placed. According to the results of the present study, rail supporting stiffness can variate the vibration characteristics of the total system including the vehicle, and therefore the correlation between the vibration of vehicle should be taken into account to determine the supporting stiffness of the slab track.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.65-69
• /
• 1994

전철의 궤도 방진에 의한 소음.진동 저감 효과를 실제 측정에 의해 확인하기 위해서는 궤도 방진 전과 후의 소음.진동 측정 데이타가 필요하다. 그러나 방진 궤도 구조로 설계된 신축 역사는 전철이 운행되지 않으므로 궤도 방진 전의 전철 운행시 발생하는 소음.진동을 측정할 수 없으며 공사완료 후 전철이 운행된다고 하여도 궤도 방진이 되지 않은 상태에서의 소음.진동 측정은 불가능하다. 따라서 본 연구에서는 현재 전철이 운행되고 있고 궤도 방진이 되어 있지 않은 유사한 구조의 산본 전철 역사를 선택하여 소음.진동을 측정, 분석하고 이 데이타를 방진 궤도 구조로 설계된 유사한 구조 신축 역사의 소음.진동을 예측하는데 기초 입력 데이타로 제시하고자 한다.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.85-92
• /
• 2013

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. The main contributors to rolling noise are the sleepers, rail, and wheels. In order to analyze and predict rolling noise, it is necessary to understand the vibrating behaviors of railway tracks, as well as of the wheels. In the present paper, theoretical modeling methods for railway track are reviewed in terms of rolling noise; these methods are applied for the three representative types of domestic railway tracks operated: the conventional ballasted track, KTX ballasted track and KTX concrete track. The characteristics of waves propagating along rails are investigated and compared among the types of tracks. The tracks are modeled as discretely supported Timoshenko beams and are compared in terms of the averaged squared amplitude of velocity, which is directly related to the sound radiation from the rails.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.191-196
• /
• 1993

본 연구에서는 이러한 방진궤도의 성능을 파악하고 또 적절한 방진궤도의 설계를 위하여 먼저 모형화하는 방법을 제시하였다. 이를 위해서는 궤도를 구성하는 방진요소의 특성을 결정하는 것이 필수적이므로 현재 사용되고 있 는 점탄성 방진재에 대하여 주파수, 온도, 초기 변형률, 동적변형률등 여러가 지 인자에 대한 물성치를 구하였으며, 이를 이용하여 궤도계의 진동전달 특 성을 파악하고 고찰하였다.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.167-174
• /
• 2009

Due to the travelling of the train with high speed the period of maintenance activities of the ballasted track is coming to be short, and more from the residential area of the ballasted track tunnel circumference the civil appeal is increasing with railroad vibration problem. To reduce the vibration problem and a maintenance cost establishes the ballast mat in the tunnel within part segment. In this study, to estimate the vibration reduction effect of the ballast mat we have done a comparative analysis with the vibration field test by the transit train by at the ballasted track with ballast mat and the standard ballasted track without vibration protection in tunnel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1028-1033
• /
• 2001

열차주행시 열차의 이동축중에 의한 제도구조물의 동적거동은 열차의 동특성과 열차속도, 궤도의 유형 및 제도재료의 물성치에 따라 변하며 차량과 궤도의 상호작용에 따라 변하게 된다.(중략)

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.77-87
• /
• 1994

Vibrational analysis of slab tracks for HSR(High Speed Rail) is performed in order to find dynamic characteristics and to control noise and vibration for the tracks. Wheel-rail interactive force is included in the analysis by modelling the vehicle and track as an unsprung mass and elastically-supported-double-beam respectively, and both are assumed to be connected by the Hertzian spring. From this study, it has been found that vibration in the track and the force transmitted to the infrastructure could be reduced by controlling elasticity, mass and stiffness of the track supporting system appropriately.

• Journal of the KSME
• /
• v.53 no.2
• /
• pp.49-53
• /
• 2013

철도차량은 중요한 친환경 대중교통 수단으로서 운행 구간이 확장되고 있다. 그러나 철도선로가 거주지역을 통과하여 설치되면서 환경 소음 문제가 야기되고 있으며 이의 저감이 중요한 이슈 중 하나이다. 철도차량 및 궤도에서 발생하는 전동음은 저감해야 할 주요 소음원 중 하나이다. 따라서 철도의 진동 및 소음 관련된 연구현황들에 대해 알아보고 궤도 지지단을 고려한 레일의 진동과 방사 소음 특성을 예측하고 궤도 모니터링 시스템 개발에까지 적용이 가능한 방법들에 대한 연구가 필요하다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1057-1063
• /
• 2023

The urban railway sleeper floating track, the subject of this study, is an anti-vibration track to reduce vibration transmitted to the structure. currently, the replacement cycle of resilience pad for sleeper floating tracks is set and operated based on load. however, most previous studies were conducted on load-based structural safety aspects, such as fatigue life evaluation of sleeper anti-vibration pads and increase in track impact coefficient and track support stiffness due to increase in spring stiffness. therefore, in this study, we measure the vibration acceleration of the ballast for each analysis section and use the results of 7 million fatigue tests to calculate the spring stiffness of the resilience pad for each section. the spring stiffness of the resilience pad calculated for each section was set as the analysis data and the concrete vibration acceleration was derived analytically. the adequacy of analysis modeling was verified as the analyzed concrete bed vibration acceleration for each section was within the field-measured concrete bed vibration acceleration range. using the vibration acceleration curve according to the derived spring stiffness change, the spring stiffness of the resilience pad is estimated from the measured vibration acceleration. therefore, we would like to present a technique that can estimate the spring stiffness of resilience pad of a running track using the vibration acceleration of the measured concrete bed.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.463-472
• /
• 2007

In this paper, the correlation between the vibration characteristics of the track components and the parameters affecting the vibration is analysed. To do it, the accelerations of each track component such as rails, sleepers and ballast are measured in Kyong-Bu high-speed line. The RMS values of the measured data are calculated and the pad stiffness, the longitudinal irregularity, running velocity and the corrugation, are considered as the parameters in the viewpoint of track. By using the linear regression, the correlation coefficient is calculated to analyse the relationship. Also, the 1/3 Octave analysis is calculated to analyse the dominant frequency band of tile vibrations of the track components.