• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.327-334
• /
• 1992

As a promising method for the volume reduction of the low-level liquid waste, the pervaporation process was studied using a cellulose acetate membrane. Experimental results showed that the pervaporation method, usually applied to separation of organic materials, has a good decontamination effect for the volume reduction of liquid waste and the evaporation rate of water in this process was markedly faster than that of natural evaporation method, a wide-used process for the volume reduction of liquid waste. Depending on the feed solution conditions, the pervaporation characteristics were evaluated by the experimental results and the optimum conditions for preparation of the cellulose acetate membrane were established to increase the pervaporation flux through the membrane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.404-405
• /
• 2009

Insulation diagnostic tests for high voltage motor stator winding were conducted to analyze the insulation characteristics. Test motors were manufactured same factory and year(1996). Insulation characteristics of moisture winding are different from those of deteriorative winding. Insulation resistance and disscipation factor test results are sensitive to moisture winding. AC current, disscipation factor tip-up and PD test results are sensitive to deteriorative winding. Also, Capacitance value for stator winding insulation material has characteristic of increasing in moisture winding.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.45-48
• /
• 1990

This paper deals with the control strategy for constant voltage, constant frequency (CVCF) generation of doubly-fed Induction generator. As induction machine is a nonlinear and multivariable machine, so, the influential factors for CVCF generation of induction generator are the magnitude of output voltage, load current and its power factor, slip of the machine, etc. To get appropriate control scheme and to research the effect of its parameters, the control equation of induction machine is derived and tested. The derived condition is very useful for the CVCF control of the machine and for determing the characteristics of the system. The simulation results show that magnetizing reactance and rotor resistance is a very important parameter in this control system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1461-1471
• /
• 2002

Linear motor has a lot of advantages in comparison with conventional feed mechanisms: high velocity, high acceleration, good positioning accuracy and a long lifetime. An important disadvantage of linear motor is its high power loss and heating up of motor and neighboring machine components in operation. For the application of the linear motors to precision machine tools an effective cooling method and thermal optimizing measures are required. In this paper Finite-Element-Method for the thermal behavior of synchronous linear motor is introduced, which is useful for the design and manufacturing of linear motors. By modeling the linear motor the orthotropic physical properties of the sheet metal and windings were considered and convective coefficient in the water cooler and to the surroundings was defined by analytical and experimental method. The calculated isothermal lines could analyze the heat flow in the linear motor.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.55-59
• /
• 1991

This paper deals with the control stratege for the constant voltage, constant frequency(CVCF) generation of doubly-fed induction generator. As an induction machine is a nonlinear and multivariable machine, so, the control system is needed a very sophiticated control processes to meet a CVCF condition. In this paper, control system is constructed and tested using the suggested exitation equation. The test results show that the suggested equation and control system are very useful strategy for the CVCF control of induction generator.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1109-1110
• /
• 2011

본 논문에서는 선간단락 시 단락전류에 의한 전력용 변압기의 단락특성을 해석하였다. 변압기 사양은 1[MVA], 6,600/660[V] 단상 내철형 배전용 변압기를 사용하였으며, 변압기에 유입되는 단락전류를 회로방정식을 이용해 계산하였다. 단락전류에 의해 발생되는 누설자속 밀도는 유한요소법을 이용해 계산하였고, 계산된 단락전류와 누설자속 밀도에 의해 권선에서 발생하는 축 방향과 반경방향 단락전자력을 계산하였다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.126-128
• /
• 2004

This paper deals with an automatic optimum design based on capacity for a synchronous reluctance motor (SynRM). The focus of this paper is the design relative to the output power on the basis of rotor shape of a SynRM in each capacity. And optimization algorithm is used by means of sequential unconstrained minimization technique(SUMT). The coupled Finite Elements Analysis (FEA) & Preisach model have been used to evaluate nonlinear solutions. The proposed procedure allows to define the rotor geometric dimensions according to capacity starting from an existing motor or a preliminary design.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.341-344
• /
• 1988

This paper derives a condition foe constant voltage i constant frequency generation of doubly-fed induction generator. The condition is varied by the magnitude of output voltage, load current and its power factor, slip of the machine. Magnitude of output voltage is controlled by exiting voltage which is caculated by derived equation from operating condition. frequency of output voltage is controlled by injecting slip frequency to the rotor which is the difference between wanted output frequency and rotor frequency.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.219-220
• /
• 2012

본 연구는 3상 보다 많은 장점을 가지는 다상 교류전동기를 연구하기 위하여 개발된 5상 1.5Kw 220V, 60Hz 농형 유도전동기의 특성 개선에 대한 연구결과이다. 연구용으로 개발된 5상 전동기는 정격운전에서 전압변동률, 속도변동률, 역율, 효율 및 운전특성 등이 많이 저하 되어 이에 대한 문제점의 개선를 요구하고 있었다. 이에 따라 기존에 개발된 고정자와 회전자의 철심 코아의 구조는 변화 하지 않고 그대로 고정된 상태를 유지하면서, 고정자 권선의 재설계와 제작을 되풀이하는 시행오차 법에 의해 최적의 전동기를 설계 제작하여 정밀 시험을 통하여 운전특성이 개선된 연구결과를 보여준다. 제시되는 특성실험 결과는 무부하시험, 구속시험, 부하특성실험, FFT 고조파 분석, 전동기의 정수 결정 및 등가회로이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.771-774
• /
• 2000

Coiling processes of filaments need precise work and standardization. It is important to maintain equal pitch of filaments. Uniform pitch of filaments is one of the dominant elements of life time and efficiency of bulbs. First coiling process of filament wires is modeled by nonlinear contact problem between filaments and mandrel. Analysis of coiling process using finite element method is conducted to consider manufacturing parameters and pitch distance is calculated under the given conditions. Also image detecting system is developed to inspect uniformity of pitch. This system will be used to inspect quality of filaments during coiling processes.